192.168.5.1 Admin Login

Certain ISP-issued routers and niche networking brands — including MyRepublic, No Geek Needed, and DQ Technology — use 192.168.5.1 as their default gateway IP address. It operates as a private IPv4 address within the Class C range, making it suitable for home and small-office networks. Because it sits in the less commonly used 192.168.5.x subnet, it tends to avoid IP conflicts with the far more popular 192.168.1.1 or 192.168.0.1 gateways. Only one device on your local network should be assigned 192.168.5.1 at any given time to prevent address conflicts.

How to Access 192.168.5.1

To reach your router's admin panel at 192.168.5.1, open any web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.5.1 directly into the address bar. Do not type it into a search engine, as that will return search results rather than your router's login page. Press Enter and you should be greeted with a login prompt.

For routers from MyRepublic, No Geek Needed, and DQ Technology, the most commonly reported default credentials are:

• Username: admin  |  Password: sti.admin5
• Username: sti.admin5  |  Password: admin
• Username: admin  |  Password: admin

If none of these work, check the label on the bottom or back of your router — manufacturers often print the default login credentials there. Once you're logged in, you can manage your Wi-Fi name (SSID), password, security settings, port forwarding, DHCP range, and firmware updates, all from the 192.168.5.1 dashboard.

If You Can't Access 192.168.5.1

If typing http://192.168.5.1 into your browser doesn't load a login page, there are a few things you should check before assuming the address is wrong:

1. Verify your default gateway: On Windows, open Command Prompt (Start > type cmd > Enter) and run ipconfig /all. Look for the Default Gateway field. On macOS or Linux, open Terminal and run netstat -nr | grep default. If the gateway shown is not 192.168.5.1, then your router is using a different IP.
2. Check your connection: Make sure your device is connected to the router — either via an Ethernet cable or over Wi-Fi. You cannot reach 192.168.5.1 from outside the local network.
3. Disable VPN or proxy: Active VPN connections or browser proxy settings can redirect your traffic and prevent the admin page from loading. Temporarily disable them and try again.
4. Try a different browser or incognito mode: Cached data or browser extensions can sometimes interfere. Open a private/incognito window and navigate to http://192.168.5.1 again.
5. Use a wired connection: If you're on Wi-Fi and the page won't load, plug an Ethernet cable directly from your computer into one of the router's LAN ports and try again.

If you still can't access 192.168.5.1 after all of the above, check our guide to find your router IP address for more detailed steps.

Router Brands That Use 192.168.5.1

Unlike the widely shared 192.168.1.1 gateway, the address 192.168.5.1 is used by a smaller, more specific set of manufacturers and ISP-provisioned devices. Here are the confirmed brands associated with this default gateway:

• MyRepublic — A broadband ISP operating primarily in Singapore, Australia, and New Zealand. MyRepublic provisions certain gateway routers with 192.168.5.1 as the default LAN IP. The admin panel is typically accessible at http://192.168.5.1 using ISP-supplied credentials.
• No Geek Needed (NGN) — A consumer-focused networking brand. The No Geek Needed NGNHWI-N3 model is confirmed to use 192.168.5.1 as its default gateway. Default credentials are typically admin / admin.
• DQ Technology — A networking hardware manufacturer whose devices have been associated with the 192.168.5.1 address. Default login is commonly admin / admin.

If your router is from one of these brands and you're having trouble logging in, the next section covers factory reset procedures to restore access.

Factory Reset for Routers Using 192.168.5.1

If you've forgotten your admin password or are locked out of the 192.168.5.1 admin panel, a factory reset is your best option. This will erase all custom settings — including your Wi-Fi name, password, and any port forwarding rules — and restore the router to its original defaults.

General factory reset procedure (applies to most routers using 192.168.5.1):

1. Make sure your router is powered on. Do not unplug it during the reset process.
2. Locate the Reset button on the back or bottom of the router. It is usually a small recessed button labeled Reset or RST.
3. Use a paperclip, pin, or toothpick to press and hold the Reset button for 10–15 seconds.
4. Release the button when the router's indicator lights begin to flash or change pattern — this signals the reset is in progress.
5. Wait 60–90 seconds for the router to fully reboot and restore factory defaults.
6. Reconnect to the router's default Wi-Fi network (found on the label) and navigate to http://192.168.5.1 to log in with the default credentials.

MyRepublic-specific note: If your MyRepublic router was provisioned by the ISP, the default credentials after a factory reset may be printed on the device label or provided in your ISP welcome documentation. Contact MyRepublic support if you cannot locate them.

No Geek Needed (NGNHWI-N3) note: After a factory reset, the default gateway reverts to 192.168.5.1 and the default login is admin / admin. You should immediately change this password after logging in to secure your network.

Changing Your Router Password at 192.168.5.1

Keeping the default password on any router is a significant security risk. If your router uses 192.168.5.1 as its gateway, here's how to update your admin password:

1. Log in to http://192.168.5.1 using your current credentials.
2. Navigate to the Administration, System, or Management section — the exact label varies by brand (MyRepublic, No Geek Needed, and DQ Technology each have slightly different UI layouts).
3. Look for a Change Password or Admin Password option.
4. Enter your current password, then type your new password twice to confirm.
5. Click Save or Apply. Your router may prompt you to log in again with the new credentials.

Choose a strong password that is at least 12 characters long and includes a mix of uppercase letters, lowercase letters, numbers, and symbols. Avoid using easily guessable information like your address or birthday. Store the new password somewhere safe — if you forget it, you'll need to perform a factory reset to regain access to 192.168.5.1.

Router Username and Password List

What Is 192.168.5.1 as a Private IP Address?

192.168.5.1 is a private IPv4 address that falls within the Class C private address range defined by RFC 1918 (192.168.0.0 – 192.168.255.255). This means it is not routable on the public internet — it exists only within your local network. Your Internet Service Provider (ISP) or router manufacturer assigns it as the default gateway so that all devices on your network have a central point of communication.

When your router uses 192.168.5.1 as its gateway, every device you connect to that network receives a unique private IP address in the same subnet — typically in the range of 192.168.5.2 through 192.168.5.254. For example:

• Your laptop might receive 192.168.5.2
• Your smartphone might receive 192.168.5.3
• Your smart TV might receive 192.168.5.4
• Your printer might receive 192.168.5.5

These addresses are dynamically assigned by the router's DHCP (Dynamic Host Configuration Protocol) server. The router at 192.168.5.1 acts as the traffic controller — it receives data requests from your devices, forwards them to the internet via your ISP's public IP address, and routes the responses back to the correct device on your local network.

Because 192.168.5.1 sits in the less commonly used 192.168.5.x subnet, it is less likely to conflict with other network equipment compared to the ubiquitous 192.168.1.1 or 192.168.0.1. This makes it a practical choice for ISPs like MyRepublic that provision their own gateway hardware.

Related IP Addresses in the 192.168.x.x Range

If 192.168.5.1 is not your router's default gateway, your device may be using one of the other common private IP addresses listed below. These are all Class C private addresses used by various router manufacturers as default gateways:

• 192.168.1.1 — The most widely used default gateway, found on routers from TP-Link, Linksys, D-Link, and many others.
• 192.168.0.1 — Common on Netgear, D-Link, and various ISP-supplied routers.
• 192.168.2.1 — Used by some Cisco and Belkin router models.
• 192.168.1.254 — Default gateway for certain DSL modems and some Actiontec devices.
• 192.168.8.1 — Commonly used by Huawei mobile Wi-Fi routers and MiFi devices.
• 192.168.10.1 — Found on some Ubiquiti and TRENDnet devices.
• 192.168.100.1 — Used by certain cable modems and ISP gateway devices.
• 10.0.0.1 — A Class A private address used by some Xfinity/Comcast and Apple routers.

If you're unsure which IP your router uses, run ipconfig /all on Windows or netstat -nr on macOS/Linux and look for the Default Gateway value.

Frequently Asked Questions About 192.168.5.1

What is 192.168.5.1?

192.168.5.1 is a private Class C IPv4 address used as the default gateway by routers from brands such as MyRepublic, No Geek Needed, and DQ Technology. It allows you to access your router's admin panel to manage your network settings.

How do I log in to 192.168.5.1?

Open a web browser and navigate to http://192.168.5.1. Enter your router's username and password. For most routers using this IP — including No Geek Needed and DQ Technology models — the default credentials are admin / admin or admin / sti.admin5.

Why can't I reach 192.168.5.1?

The most common reasons are: your device is not connected to the router's network, your router uses a different default gateway IP, or a VPN is active on your device. Run ipconfig /all on Windows to confirm your actual default gateway address.

Is 192.168.5.1 safe to access?

Yes. 192.168.5.1 is a private IP address that is only accessible from within your local network. It cannot be reached from the public internet, making it safe to use for router administration.

Can two devices share the IP 192.168.5.1?

No. Assigning 192.168.5.1 to more than one device on the same network will cause an IP address conflict, resulting in connectivity issues for both devices. Only your router's gateway should use this address.

How do I reset my router that uses 192.168.5.1?

Press and hold the physical Reset button on the back of your router for 10–15 seconds while it is powered on. After the router reboots, navigate back to http://192.168.5.1 and log in with the factory default credentials printed on your device label.

What subnet does 192.168.5.1 belong to?

With a standard subnet mask of 255.255.255.0, 192.168.5.1 belongs to the 192.168.5.0/24 subnet. This subnet supports up to 254 host addresses, ranging from 192.168.5.1 to 192.168.5.254.