192.168.16.1 Admin Login

192.168.16.1 is a private Class C IPv4 address used as the default gateway by several router brands, most notably LB-LINK, B-LINK, and the Linksys WTR54GS travel router series. It belongs to the 192.168.16.0/24 subnet — a less common but fully valid segment of the private 192.168.0.0/16 address space. If your router uses 192.168.16.1 as its default gateway, you can access its admin panel by typing http://192.168.16.1 directly into your browser's address bar. Other commonly used private gateway addresses include 192.168.1.254 and 192.168.0.1.

Which Router Brands Use 192.168.16.1?

While 192.168.16.1 is not as universally common as 192.168.0.1 or 192.168.1.254, it is the confirmed default gateway for a specific set of router manufacturers. Here are the brands you're most likely to encounter with this IP:

• LB-LINK — The primary brand associated with 192.168.16.1. Models such as the BL-WR3000, BL-WR4000A, BL-W1200, BL-WDR4600, and BL-WR450H all ship with 192.168.16.1 as their factory default gateway. LB-LINK routers also allow access via the hostname myblink.cn as an alternative to the IP address. Default credentials are admin / admin.
• B-LINK — Closely related to LB-LINK, B-LINK routers including the BL-310R, BL-WA01, BL-WR3000, and BL-WR4000 use 192.168.16.1 as their default login address. Default credentials are admin / admin.
• Linksys WTR54GS — The Linksys Wireless-G Travel Router (WTR54GS v1 and v2) uses 192.168.16.1 as its default IP. This is notable because most other Linksys routers default to 192.168.1.1. The WTR54GS was designed for hotel and travel use, and its unique IP helps avoid conflicts with hotel networks that commonly use the 192.168.1.x range.
• Aceex — Several Aceex router models (A2R11/T, A2R41/T, A2WR/T, AVR01/B, AWVR01/B) use 192.168.16.1 as their default gateway with admin / admin credentials.
• Edimax — The Edimax AR-7064 A uses 192.168.16.1 as its default login IP with admin / admin credentials.
• REPOTEC — The REPOTEC RP-IP2604 model uses 192.168.16.1 as its default gateway address.
• Edgeless — The Edgeless EL001 model is also associated with 192.168.16.1 as its default IP address.

If you're unsure whether your router uses 192.168.16.1, check the label on the bottom or back of your device — the default gateway IP is usually printed there alongside the default username and password.

How to Access 192.168.16.1

Accessing your router's admin panel at 192.168.16.1 is straightforward. Follow these steps to get into your router's configuration interface:

1. Connect to your network — Make sure your computer, laptop, or mobile device is connected to the router either via an Ethernet (LAN) cable or over Wi-Fi. A wired connection is recommended to prevent being disconnected mid-session.
2. Open your web browser — Launch any modern browser such as Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari.
3. Type the IP address — In the browser's address bar (not the search bar), type http://192.168.16.1 and press Enter. If the page doesn't load, try https://192.168.16.1 with the secure prefix.
4. Enter your login credentials — You will be presented with a login page. For LB-LINK and B-LINK routers, the default username is admin and the default password is admin. For the Linksys WTR54GS, the default password is admin with no username required (leave the username field blank).
5. Access the admin dashboard — Once logged in, you'll have full access to your router's settings, including Wi-Fi configuration, security settings, port forwarding, DHCP, and firmware updates.

For LB-LINK routers specifically, you can also try accessing the admin panel using the hostname myblink.cn in your browser as an alternative to typing 192.168.16.1 directly.

If You Can't Access 192.168.16.1

If typing http://192.168.16.1 into your browser doesn't bring up a router login page, don't panic. There are several reasons this might happen and straightforward ways to fix each one:

• 192.168.16.1 may not be your gateway — Your router's IP may have been changed from the factory default. To verify your actual gateway, open the Command Prompt on Windows (Start > type cmd > Enter) and run ipconfig. Look for the Default Gateway value. On macOS or Linux, run netstat -nr or check System Preferences > Network. If the gateway shown is different from 192.168.16.1, use that IP instead. You can also check our guide to find your router IP address.
• You're not connected to the right network — Make sure your device is connected to the router that uses 192.168.16.1. If you have multiple networks, you may be connected to the wrong one.
• Browser cache or extensions interfering — Try opening an incognito/private browsing window and entering the IP again. Some browser extensions (especially VPNs or ad blockers) can interfere with local IP access.
• The router's IP was changed — If someone previously changed the router's IP address from 192.168.16.1 to something else, you'll need to either find the new IP using ipconfig or perform a factory reset to restore 192.168.16.1 as the default.
• Firewall blocking access — Temporarily disable your computer's firewall and try again. Some security software blocks access to local admin panels.

Brand-Specific Troubleshooting for 192.168.16.1

LB-LINK Routers

LB-LINK routers are the most commonly associated brand with 192.168.16.1. If you're having trouble accessing your LB-LINK admin panel, keep these tips in mind:

• LB-LINK routers support two access methods: http://192.168.16.1 and the hostname http://myblink.cn. Try both if one doesn't work.
• The default credentials printed on the bottom label of your LB-LINK device should always be tried first. Most models use admin / admin, but some newer models may have a unique password printed on the label.
• If the admin panel loads but you can't log in, the password may have been changed. Proceed with a factory reset (see below).
• After logging in, navigate to Advanced > LAN Settings to change the router's IP address if needed.

B-LINK Routers

B-LINK is the predecessor brand to LB-LINK and shares the same 192.168.16.1 default gateway. The admin interface is very similar. If you're setting up a B-LINK BL-WR3000 or BL-WR4000, the process is identical to LB-LINK — navigate to http://192.168.16.1, log in with admin / admin, and configure your network from the dashboard.

Linksys WTR54GS Travel Router

The Linksys WTR54GS is unique in that it uses 192.168.16.1 instead of the typical Linksys default of 192.168.1.1. This was intentional — the travel router was designed to be used in hotels and public networks where 192.168.1.x addresses are already in use. To access the WTR54GS admin panel, type http://192.168.16.1 in your browser. Leave the username field blank and enter admin as the password. The setup wizard will guide you through configuring the router for hotel or travel use.

How to Factory Reset Your Router at 192.168.16.1

If you've forgotten your router's admin password or the 192.168.16.1 login page is inaccessible, a factory reset will restore all settings — including the IP address and login credentials — back to their defaults. Here's how to do it for the main brands using this IP:

LB-LINK / B-LINK Factory Reset

1. Make sure your LB-LINK or B-LINK router is powered on.
2. Locate the Reset button on the back of the router. It is typically recessed inside a small hole to prevent accidental resets.
3. Use a paperclip, pin, or toothpick to press and hold the Reset button for approximately 10 seconds.
4. The router's indicator lights will flash or turn off and back on, signaling that the reset is complete.
5. Wait 30–60 seconds for the router to fully reboot.
6. Reconnect to the router's default Wi-Fi network (check the label on the bottom of the device for the default SSID and password).
7. Open your browser and navigate to http://192.168.16.1 and log in with admin / admin.

Linksys WTR54GS Factory Reset

1. Ensure the router is powered on.
2. Locate the Reset button on the back panel of the WTR54GS.
3. Press and hold the Reset button for 10–15 seconds using a pin or paperclip.
4. Release the button when the power LED begins to flash.
5. Allow the router to reboot fully (approximately 60 seconds).
6. Access the admin panel at http://192.168.16.1 with a blank username and password admin.

Important: A factory reset will erase all your custom settings, including your Wi-Fi name (SSID), Wi-Fi password, port forwarding rules, and any other configurations. Make sure to back up your settings from the admin panel before performing a reset if possible.

Changing Your Router's Password via 192.168.16.1

Keeping the default admin / admin credentials on your LB-LINK, B-LINK, or Linksys WTR54GS router is a significant security risk. Anyone connected to your network can access your router's settings if you haven't changed the default password. Here's how to update it:

1. Log in to your router's admin panel at http://192.168.16.1 using your current credentials.
2. Navigate to the System, Administration, or Management section of the dashboard (the exact label varies by brand and firmware version).
3. Look for a Change Password or Admin Password option.
4. Enter your current password, then type your new password twice to confirm it.
5. Click Save or Apply. You will be prompted to log in again with your new credentials.

Choose a strong password that is at least 12 characters long and includes a mix of uppercase letters, lowercase letters, numbers, and symbols. Avoid using easily guessable information like your name, address, or phone number. Once changed, store your new password in a secure password manager so you don't lose access to your 192.168.16.1 admin panel in the future.

Router Username and Password List

What Is 192.168.16.1 as a Private IP Address?

192.168.16.1 is a private Class C IPv4 address that falls within the reserved private IP range of 192.168.0.0 – 192.168.255.255, as defined by RFC 1918. This means it is not routable on the public internet — it exists exclusively within your local area network (LAN). No data sent to or from 192.168.16.1 will ever travel beyond your router to the wider internet.

As a Class C address, 192.168.16.1 belongs to a subnet that supports up to 254 usable host addresses (192.168.16.1 through 192.168.16.254), with 192.168.16.0 reserved as the network address and 192.168.16.255 as the broadcast address. When your router uses 192.168.16.1 as its gateway, it will typically assign IP addresses to connected devices in the range of 192.168.16.2 through 192.168.16.254 via DHCP. For example:

• Your laptop might receive 192.168.16.2
• Your smartphone might receive 192.168.16.3
• Your smart TV might receive 192.168.16.4
• Your printer might receive 192.168.16.5

Every device on your network gets its own unique private IP address so the router knows exactly where to send incoming data packets. The router itself sits at 192.168.16.1 and acts as the traffic controller between your local devices and the public internet via your ISP's connection.

The 192.168.16.x subnet is less commonly used than the more popular 192.168.0.x or 192.168.1.x ranges, which is actually an advantage in certain scenarios — particularly for travel routers like the Linksys WTR54GS, which deliberately uses 192.168.16.1 to avoid IP conflicts with hotel and public Wi-Fi networks that almost always use the 192.168.1.x range.

Related IP Addresses in the 192.168.16.0/24 Subnet

If you're working within the same network as 192.168.16.1, you may encounter or need to configure other IP addresses in the 192.168.16.0/24 subnet. Here are some commonly referenced addresses in this range and their typical roles:

• 192.168.16.1 — The default gateway (your router's admin IP for LB-LINK, B-LINK, Linksys WTR54GS, and others).
• 192.168.16.2 – 192.168.16.254 — Available for DHCP assignment to client devices (computers, phones, tablets, smart home devices, etc.).
• 192.168.16.0 — The network address for this subnet (not assignable to devices).
• 192.168.16.255 — The broadcast address for this subnet (not assignable to devices).

You may also want to explore other common private gateway addresses used across different router brands. Some of the most widely used alternatives include 192.168.0.1 (used by Netgear, D-Link, and others), 192.168.1.254 (used by some DSL modems and ISP-provided routers), 192.168.8.1 (used by Huawei and ZTE), 192.168.10.1, and 10.0.0.1 (used by some Xfinity and Apple routers).

Frequently Asked Questions About 192.168.16.1

What is 192.168.16.1 used for?

192.168.16.1 is used as the default gateway IP address for several router brands, most notably LB-LINK, B-LINK, and the Linksys WTR54GS travel router. By navigating to http://192.168.16.1 in your browser while connected to one of these routers, you can access the router's admin panel to configure Wi-Fi settings, security options, port forwarding, DHCP, and more.

What is the default username and password for 192.168.16.1?

For most routers that use 192.168.16.1 as their default gateway — including LB-LINK and B-LINK models — the default login credentials are username: admin and password: admin. For the Linksys WTR54GS, leave the username field blank and enter admin as the password. Always check the label on the bottom of your specific router model, as some devices may have a unique factory password printed there.

Why can't I access 192.168.16.1?

If you can't reach the login page at 192.168.16.1, the most likely reasons are: (1) your device is not connected to the router that uses this IP, (2) the router's IP address has been changed from the default, or (3) a browser extension or firewall is blocking the connection. Run ipconfig (Windows) or netstat -nr (Mac/Linux) to confirm your actual default gateway. If the IP was changed, you'll need to perform a factory reset on your LB-LINK, B-LINK, or Linksys WTR54GS router to restore 192.168.16.1 as the default.

Is 192.168.16.1 safe to access?

Yes, 192.168.16.1 is completely safe to access from within your own local network. It is a private IP address that is only reachable by devices connected to your router — it cannot be accessed from the public internet. However, you should always change the default admin / admin password on your LB-LINK or B-LINK router to prevent unauthorized access from anyone on your local network.

Can I change my router's IP from 192.168.16.1 to something else?

Yes. Once logged in to your router's admin panel at 192.168.16.1, navigate to the LAN Settings or Network Settings section and you'll find an option to change the router's local IP address. You can change it to any valid private IP address, such as 192.168.1.1 or 192.168.0.1. After saving the change, your router will reboot and you'll need to use the new IP address to access the admin panel going forward. Only change this if you have a specific reason to do so, such as resolving an IP conflict.

Why does the Linksys WTR54GS use 192.168.16.1 instead of 192.168.1.1?

The Linksys WTR54GS is a travel router designed for use in hotels, airports, and other public spaces. Most hotel networks and public Wi-Fi systems use the 192.168.1.x address range for their own infrastructure. By defaulting to 192.168.16.1, the WTR54GS avoids IP address conflicts with the host network, allowing it to function correctly as a secondary router even when the hotel's network is already using 192.168.1.1 as its gateway.