192.168.1.4 Admin Login

192.168.1.4 is a Class C private IPv4 address that sits within the widely used 192.168.1.0/24 subnet. While it is most notably documented as the default login IP for the On Networks N300 Wi-Fi Range Extender, it is far more commonly encountered as a DHCP-assigned address — the fourth device address handed out by routers whose gateway sits at 192.168.1.1 or 192.168.1.254. Because it falls inside the most popular private IP range in the world, you are likely to encounter 192.168.1.4 in home networks, small-office setups, and even enterprise VLANs. Other frequently used gateways in related subnets include 192.168.0.1, 192.168.2.1, 10.0.0.1, and 192.168.100.1.

How to Access 192.168.1.4

To reach the admin panel at 192.168.1.4, open any modern web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.1.4 directly into the address bar. Do not use a search engine; paste the address straight into the URL bar and press Enter. If a login page appears, you are connected to a device — most likely the On Networks N300 Wi-Fi Range Extender — that uses this address as its management interface. Enter the default credentials (username: n300, password: n300) unless they have been changed previously.

If you are on a standard home network where the router gateway is 192.168.1.1, then 192.168.1.4 is most likely a DHCP-leased address assigned to one of your connected devices — a laptop, smartphone, smart TV, or IoT gadget. In that case, navigating to http://192.168.1.4 will not open a router admin panel; instead, you should direct your browser to your actual gateway address to manage your network settings.

Router Brands That Use 192.168.1.4

Unlike the more universally adopted gateway addresses such as 192.168.1.1 or 192.168.0.1, the address 192.168.1.4 is used by a very small number of devices as a factory-default management IP. The confirmed brand is:

• On Networks — The N300 Wi-Fi Range Extender ships with 192.168.1.4 as its default login address. The default username is n300 and the default password is n300. On Networks is a brand closely associated with Netgear's retail ecosystem and targets home users looking for affordable range extension solutions.

For all other routers and networking equipment, 192.168.1.4 is best understood as a general-purpose private IP address within the 192.168.1.0/24 subnet. It is routinely assigned by DHCP servers to client devices and can also be manually configured as a static IP for printers, NAS drives, IP cameras, smart home hubs, and other networked hardware that benefits from a fixed, predictable address.

If You Can't Access 192.168.1.4

If typing http://192.168.1.4 into your browser returns an error, a blank page, or a "site can't be reached" message, work through the following checks:

1. Confirm your gateway address. Open a Command Prompt on Windows (Start > type cmd > Enter) and run ipconfig /all. On macOS or Linux, open Terminal and run ip route or netstat -nr. Look for the Default Gateway field. If it shows something other than 192.168.1.4 — for example 192.168.1.1 or 192.168.1.254 — then 192.168.1.4 is not your router's admin address.
2. Check your physical connection. Make sure your device is connected to the network either via Ethernet cable or Wi-Fi. A disconnected device cannot reach any local IP address.
3. Disable browser extensions. Ad blockers and VPN extensions can interfere with local IP access. Try opening an incognito/private window or a different browser entirely.
4. Try HTTP instead of HTTPS. Most router admin panels run on plain HTTP. If your browser auto-redirects to HTTPS, manually type http://192.168.1.4 (without the 's') to force the correct protocol.
5. Ping the address. In Command Prompt or Terminal, run ping 192.168.1.4. If you receive replies, the device is reachable and the issue is browser-related. If requests time out, the device at that address may be offline or the address may not be in use on your network.
6. Check for IP conflicts. If two devices on your network share the address 192.168.1.4, neither will be reliably reachable. Log into your router's DHCP client list (via your actual gateway address) and look for duplicate entries.

If none of the above resolves the issue, consult our guide on how to find your router IP address to identify the correct management address for your specific device.

On Networks N300 Wi-Fi Range Extender — Setup & Troubleshooting

If you own an On Networks N300 Wi-Fi Range Extender and need to access its settings, follow these steps:

1. Connect your computer or smartphone directly to the extender's Wi-Fi network or via an Ethernet cable.
2. Open your browser and navigate to http://192.168.1.4.
3. When prompted, enter the default username n300 and the default password n300.
4. Once inside the admin panel, you can configure the extender's SSID, wireless security settings, and connection mode.

Factory Reset Procedure for On Networks N300

If you have forgotten the admin credentials for your On Networks N300 extender and can no longer log in at 192.168.1.4, a factory reset will restore all settings — including the login address and default credentials — to their out-of-box state. Here is how to perform it:

1. Ensure the extender is powered on. Look for the LED indicator to confirm it is active.
2. Locate the small Reset button on the device's housing. It is typically recessed to prevent accidental presses.
3. Use a straightened paperclip or a similar thin object to press and hold the Reset button for 10 seconds.
4. Release the button when the LEDs flash or the device restarts.
5. Wait approximately 60 seconds for the extender to fully reboot.
6. Reconnect to the extender's default Wi-Fi network and navigate back to http://192.168.1.4 using the default credentials (username: n300, password: n300).

Important: A factory reset erases all custom configurations, including your Wi-Fi network connection, SSID name, and any custom passwords. You will need to reconfigure the extender from scratch after the reset.

Changing Your Password at 192.168.1.4

Whether you are managing an On Networks N300 extender or a device you have manually assigned to 192.168.1.4, changing the default admin password is one of the most important security steps you can take. Default credentials like n300/n300 are publicly documented and leave your network vulnerable to unauthorized access by anyone who connects to your Wi-Fi.

To change your password, log in to the admin panel at http://192.168.1.4 and navigate to the Administration or Management section. Look for a Change Password or Admin Password option. You will be asked to enter your current password and then type your new password twice to confirm it. Choose a strong password that combines uppercase and lowercase letters, numbers, and special characters — and avoid using easily guessable information like your address or birthday.

Once you save the new password, your browser will prompt you to log in again with the updated credentials. Store your new password in a secure password manager so you do not lose access to the device at 192.168.1.4 in the future.

Router Username and Password List

What Is 192.168.1.4 as a Private IP Address?

192.168.1.4 is a Class C private IPv4 address, defined by RFC 1918 as part of the reserved 192.168.0.0/16 block. This means it is never routed over the public internet — it exists exclusively within local area networks (LANs). Your internet service provider (ISP) will never assign 192.168.1.4 as your public IP; it is strictly an internal address used for device-to-device communication within your home or office network.

Within the 192.168.1.0/24 subnet, the address space runs from 192.168.1.1 (typically the router gateway) through 192.168.1.254 (the last usable host address), with 192.168.1.255 reserved as the broadcast address. The address 192.168.1.4 is the fourth usable host address in this range, which is why DHCP servers on routers using a gateway of 192.168.1.1 often assign it to the third or fourth device that connects to the network — after 192.168.1.2 and 192.168.1.3 have already been leased.

Here is a practical example of how 192.168.1.4 fits into a typical home network:

• 192.168.1.1 — Your router (default gateway)
• 192.168.1.2 — Your desktop computer (first DHCP lease)
• 192.168.1.3 — Your smartphone (second DHCP lease)
• 192.168.1.4 — Your laptop or smart TV (third DHCP lease)
• 192.168.1.5 — Your tablet or gaming console (fourth DHCP lease)

Because 192.168.1.4 is a low-numbered address in a very common subnet, it is also a popular choice for static IP assignment. Network administrators frequently assign fixed addresses like 192.168.1.4 to devices that need a consistent, predictable address — such as network printers, NAS (Network Attached Storage) drives, IP security cameras, smart home controllers, and media servers. By reserving 192.168.1.4 as a static address for one of these devices, you ensure that other software and devices on your network can always find it at the same location, regardless of DHCP lease renewals.

Related IP Addresses in the 192.168.1.x Subnet

The 192.168.1.0/24 subnet contains 254 usable host addresses. Several of these are commonly encountered in home and small-office networking contexts alongside 192.168.1.4:

• 192.168.1.1 — The most widely used default gateway address in the world, used by routers from brands including Linksys, Cisco, TP-Link, Asus, and many others.
• 192.168.1.2 — Frequently the first DHCP-assigned client address on networks where the gateway is 192.168.1.1.
• 192.168.1.3 — The second DHCP-assigned client address; also sometimes used as a static IP for secondary network devices.
• 192.168.1.4 — The current address; used as the default login IP for the On Networks N300 Wi-Fi Range Extender and commonly DHCP-assigned to the third or fourth client device.
• 192.168.1.5 – 192.168.1.100 — Typical DHCP pool range for client devices on most home routers.
• 192.168.1.254 — Used as the default gateway by some router brands, including certain Cisco and BT Home Hub models.

If you need to assign a static IP to a device on your network, addresses in the lower range — such as 192.168.1.2 through 192.168.1.20 — are commonly reserved for static assignment, while the DHCP pool is configured to start at a higher address (e.g., 192.168.1.100) to avoid conflicts. Always check your router's DHCP settings before assigning 192.168.1.4 as a static address to ensure it is not already leased to another device.

Frequently Asked Questions About 192.168.1.4

Is 192.168.1.4 a router IP address?

It can be, but it is not a common default gateway. The On Networks N300 Wi-Fi Range Extender uses 192.168.1.4 as its factory-default management IP. For most other home networks, 192.168.1.4 is a DHCP-assigned client address rather than a router gateway. Your router's actual admin address is more likely 192.168.1.1 or 192.168.1.254.

What is the default username and password for 192.168.1.4?

For the On Networks N300 Wi-Fi Range Extender, the default username is n300 and the default password is n300. If you are trying to access a different device at 192.168.1.4, consult the device's label or manual for its specific default credentials, as they vary by brand and model.

Why does my device have the IP address 192.168.1.4?

Your device was most likely assigned 192.168.1.4 automatically by your router's DHCP server. This is completely normal — it simply means your device was the third or fourth to connect to the network after the router started assigning addresses from the 192.168.1.x pool. The address will remain assigned to your device until the DHCP lease expires or you disconnect from the network for an extended period.

Can two devices share the IP address 192.168.1.4?

No. Every device on a network must have a unique IP address. If two devices are both assigned 192.168.1.4 — for example, if one device has it as a static IP and another receives it via DHCP — an IP address conflict will occur. Both devices will experience intermittent or complete loss of network connectivity. To resolve this, either change the static IP assignment or configure your router's DHCP server to exclude 192.168.1.4 from its lease pool.

How do I set 192.168.1.4 as a static IP for my device?

You can assign 192.168.1.4 as a static IP either directly on the device (through its network adapter settings) or via your router's DHCP reservation feature (sometimes called Address Reservation or Static DHCP). The router method is preferred because it prevents conflicts — log in to your router's admin panel at 192.168.1.1 or your actual gateway address, navigate to the DHCP or LAN settings, and bind the MAC address of your device to the IP 192.168.1.4.

Is 192.168.1.4 visible on the internet?

No. As a Class C private IP address, 192.168.1.4 is not routable on the public internet. It is only visible and accessible within your local network. Devices outside your home or office — including websites, remote servers, and other internet users — cannot directly reach 192.168.1.4. Your router uses Network Address Translation (NAT) to map all internal private addresses, including 192.168.1.4, to your single public IP address when communicating with the internet.