192.168.1.253 Admin Login

The IP address 192.168.1.253 is a private Class C IPv4 address used as the default gateway by a select group of router and network switch manufacturers. Notably, TP-Link uses 192.168.1.253 as the default admin IP for its popular TL-WR802N Nano Router (all versions: v1.0, v2.x, and v4.x). Huawei also assigns 192.168.1.253 as the default VLANIF 1 IP address on its enterprise-grade S1720 series switches (including the S1720-GW, S1720-GWR, S1720GW-E, S1720GWR-E, S1720-GF, and S1720GFR-P models). Additionally, brands such as Tenda and D-Link have been associated with this address on select models. Because 192.168.1.253 sits near the high end of the 192.168.1.x subnet, it is less commonly used than addresses like 192.168.1.254 or 192.168.0.1, making it a distinctive and easily identifiable default gateway. Other widely used default gateways in the same subnet include 192.168.1.254 and 192.168.0.1.

How to Access 192.168.1.253

To access your router or switch's admin panel at 192.168.1.253, open any web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.1.253 directly into the address bar. Do not type it into a search engine, as that will return search results rather than your device's login page. Press Enter and you should be greeted with a login prompt.

For TP-Link TL-WR802N users, the default credentials are typically a blank username and blank password, or simply admin / admin depending on your firmware version. For Huawei S1720 series switches, the default login IP is 192.168.1.253 and you will need to set your computer's IP address to the same subnet (e.g., 192.168.1.x) before you can reach the web interface. Once logged in, you can manage wireless settings, DHCP, DNS, port forwarding, QoS bandwidth controls, MAC address filtering, WPS, PPPoE, and general network security — all from the 192.168.1.253 admin dashboard.

Because 192.168.1.253 is a private IPv4 address, it is only reachable from within your local network. You cannot access it from outside your home or office. Make sure your device is connected to the same network — either via Wi-Fi or a wired Ethernet cable — before attempting to open the admin panel.

If You Can't Access 192.168.1.253

If typing http://192.168.1.253 into your browser returns an error or a blank page, don't panic — there are several common reasons this can happen and straightforward ways to fix them:

• Wrong gateway address: 192.168.1.253 may not be your router's current gateway. Open a Command Prompt (Windows: Start > type cmd) and run ipconfig /all. Look for the Default Gateway field. On macOS or Linux, run netstat -nr | grep default in Terminal. If the result is different from 192.168.1.253, use that address instead, or check our guide to find your router IP address.
• Not connected to the right network: Ensure your computer or phone is connected to the same Wi-Fi or LAN as the router/switch using 192.168.1.253. You cannot reach this address from a different network or over the internet.
• IP address conflict: If another device on your network has been manually assigned 192.168.1.253, it can block access to the router. Check your DHCP settings and reassign conflicting devices.
• Browser proxy or extension interference: Disable any VPN, proxy settings, or browser extensions that might intercept local network requests. Try accessing 192.168.1.253 in a private/incognito window.
• Incorrect IP format entered: Common typos include 192.168.l.253 (using the letter 'l' instead of the number '1'), 192.168.1.253.1, or 192.168.1253. Double-check that you've entered the address exactly as 192.168.1.253.
• Management port changed: If your Huawei S1720 or TP-Link device has had its management port modified, you may need to append the port number, e.g., http://192.168.1.253:8080.

If none of the above resolves the issue, a factory reset (see below) will restore 192.168.1.253 as the default gateway and clear any custom configurations that may be blocking access.

Changing Your Router's Password at 192.168.1.253

Keeping the default password on any device accessible at 192.168.1.253 is a significant security risk. The default credentials for TP-Link TL-WR802N and Huawei S1720 devices are widely known, meaning anyone connected to your network could potentially access and alter your settings.

To change your password, log in to http://192.168.1.253 using your current credentials. Once inside the admin panel:

• TP-Link TL-WR802N: Navigate to Advanced > System Tools > Administration (or System > Password on older firmware). Enter your old password, then type and confirm your new password. Click Save.
• Huawei S1720: Go to System > User Management in the web interface. Select your admin account and choose to modify the password. Enter and confirm the new password, then apply the changes.

Choose a strong password that combines uppercase and lowercase letters, numbers, and special characters. Avoid using easily guessable information like your address or birthday. After saving, you'll be prompted to log in again with your new credentials — make sure to store them somewhere safe.

Router Username and Password List

Factory Reset for Devices Using 192.168.1.253

If you've forgotten your admin password or your device is behaving unexpectedly, performing a factory reset will restore 192.168.1.253 as the default gateway and wipe all custom configurations. Here's how to do it for the two primary brands that use this IP:

TP-Link TL-WR802N Factory Reset

The TP-Link TL-WR802N Nano Router has a small recessed Reset button on the device body. Follow these steps:

1. Make sure the router is powered on — the LED should be lit.
2. Using a pin, paperclip, or toothpick, press and hold the Reset button for approximately 5–10 seconds until the LED begins to blink rapidly.
3. Release the button. The router will automatically reboot and restore all factory default settings.
4. Once it restarts, you can access the admin panel again at http://192.168.1.253 using the default credentials printed on the device label.

You can also perform a software reset from within the admin panel: go to Advanced > System Tools > Factory Defaults and click Restore.

Huawei S1720 Series Factory Reset

For Huawei S1720 switches, the reset process is slightly different due to the enterprise nature of the device:

1. Connect your PC directly to the switch's management port or any LAN port via Ethernet.
2. Set your PC's IP address manually to something in the 192.168.1.x range (e.g., 192.168.1.100) with a subnet mask of 255.255.255.0.
3. Access the web interface at http://192.168.1.253 and navigate to System > Configuration > Reset to Factory Defaults.
4. Alternatively, use the physical Reset button on the switch chassis — hold it for 6 seconds or more while the device is powered on. The MST indicator will flash to confirm the reset.
5. After the reboot, the default IP 192.168.1.253/24 will be restored.

Warning: A factory reset will erase all custom configurations including Wi-Fi passwords, port forwarding rules, DHCP reservations, and any security settings. Only perform a reset if you are prepared to reconfigure the device from scratch.

What Is 192.168.1.253 — Understanding Private IP Addresses

The address 192.168.1.253 belongs to the 192.168.0.0/16 private address block, which is reserved exclusively for use within local area networks (LANs). It is classified as a Class C private IP address, meaning it falls within the range of 192.168.0.0 to 192.168.255.255. These addresses are defined by RFC 1918 and are never routed over the public internet — they exist solely for internal network communication.

When your router or switch is assigned 192.168.1.253 as its default gateway, every device that connects to that network receives its own unique private IP address from the same subnet — typically in the range of 192.168.1.1 to 192.168.1.252 (with 192.168.1.253 reserved for the gateway itself). For example:

• Your laptop might receive 192.168.1.2
• Your smartphone might receive 192.168.1.3
• Your smart TV might receive 192.168.1.4
• Your printer might receive 192.168.1.5

These private IPs are assigned dynamically by the router's DHCP server. The router at 192.168.1.253 acts as the traffic controller — it receives data requests from your devices, forwards them to the public internet using your ISP-assigned public IP, and then routes the responses back to the correct device on your local network. This process is called Network Address Translation (NAT).

The fact that 192.168.1.253 sits at the high end of the 192.168.1.x range (just below the broadcast address 192.168.1.255) is a deliberate design choice by manufacturers like TP-Link and Huawei. By placing the gateway near the top of the address range, the lower addresses (192.168.1.1 through 192.168.1.252) are left available for client devices, reducing the chance of DHCP conflicts with the gateway itself.

It's also worth noting that 192.168.1.253 is the address you use to access your device's admin settings page. If you type it into a browser and don't see a login page, it likely means the default IP has been changed, or you're not connected to the correct network. In that case, you'll need to either find the new gateway address using ipconfig /all (Windows) or perform a factory reset to restore 192.168.1.253 as the default.

Related IP Addresses in the 192.168.1.x Subnet

The 192.168.1.0/24 subnet is one of the most widely used private network ranges in the world. While 192.168.1.253 is the default gateway for TP-Link TL-WR802N and Huawei S1720 devices, several other addresses in this subnet are commonly used as default gateways by other manufacturers. Here are the most notable ones you should know about:

• 192.168.1.254 — Used by 2Wire, some Arris modems, and various DSL gateway devices as their default admin IP.
• 192.168.0.1 — One of the most common default gateways globally, used by Netgear, D-Link, and many others.
• 192.168.2.1 — Default gateway for Belkin routers and some ASUS models.
• 192.168.8.1 — Commonly used by Huawei mobile Wi-Fi (MiFi) hotspot devices.
• 192.168.10.1 — Used by some Ubiquiti and other enterprise networking equipment.
• 192.168.100.1 — Frequently assigned by cable modem/router combos from providers like Cox and Comcast.
• 10.0.0.1 — A Class A private address used by Xfinity/Comcast gateways and some Apple AirPort devices.

If you're unsure which IP your device uses, always check the label on the back or bottom of your router or switch — it will list the default gateway, username, and password for that specific model.

Frequently Asked Questions About 192.168.1.253

What devices use 192.168.1.253 as their default IP?

The most well-documented devices that use 192.168.1.253 as their default gateway are the TP-Link TL-WR802N Nano Router (versions v1.0, v2.x, and v4.x) and the Huawei S1720 series enterprise switches (S1720-GW, S1720-GWR, S1720GW-E, S1720GWR-E, S1720-GF, S1720GFR-P). Other brands including Tenda and D-Link have also been reported to use this address on select models.

Why is 192.168.1.253 used instead of 192.168.1.1?

While 192.168.1.1 is the most common default gateway in the 192.168.1.x range, manufacturers like TP-Link (for the TL-WR802N) and Huawei (for the S1720 series) chose 192.168.1.253 to place the gateway at the upper end of the subnet. This leaves the lower IP addresses free for DHCP-assigned client devices and reduces the likelihood of address conflicts during initial setup.

What is the default username and password for 192.168.1.253?

For most devices accessible at 192.168.1.253, the default credentials are admin / admin. Some TP-Link TL-WR802N firmware versions use a blank username and blank password. Huawei S1720 switches may prompt you to set a password on first login. Always check the label on your specific device for the exact factory defaults, and change them immediately after your first login to protect your network.

Is 192.168.1.253 safe to use?

Yes — 192.168.1.253 is a private IP address and is completely safe. It is not accessible from the public internet and can only be reached by devices connected to your local network. However, you should always change the default admin password on any device using this address to prevent unauthorized access from within your network.

Can two devices on my network share 192.168.1.253?

No. Like all IP addresses, 192.168.1.253 must be unique within your network. If two devices are assigned the same IP address, an IP address conflict will occur, causing connectivity issues for both devices. Your router's DHCP server is designed to prevent this automatically, but conflicts can arise if you manually assign static IPs without checking for duplicates.

What should I do if I forgot my password for 192.168.1.253?

If you've forgotten the admin password for your device at 192.168.1.253, your only option is to perform a factory reset. For the TP-Link TL-WR802N, press and hold the Reset button for 5–10 seconds until the LED blinks. For Huawei S1720 switches, hold the Reset button for 6+ seconds. After the reset, the device will revert to its factory default settings and 192.168.1.253 will be restored as the login address with the original default credentials.