192.168.0.2 Admin Login

192.168.0.2 is a Class C private IPv4 address that sits in the 192.168.0.0/24 subnet — one of the most widely used private network ranges in home and small-business environments. While it is not as universally recognised as 192.168.0.1 or 192.168.1.1, 192.168.0.2 plays a very specific and important role in networking. Two manufacturers that officially assign 192.168.0.2 as the default management IP for their hardware are Conceptronic — specifically the C150APM Wireless Access Point — and KTI Networks, whose managed switches such as the KS-2260, KGS-2422, and KGS-2423 ship with 192.168.0.2 as their factory-set IP address. Beyond these devices, 192.168.0.2 is also the first IP address that most DHCP servers assign to a client device when the router's gateway is set to 192.168.0.1, making it one of the most commonly seen addresses on any 192.168.0.x network.

How to Access 192.168.0.2

If your device — whether a Conceptronic C150APM access point or a KTI Networks managed switch — uses 192.168.0.2 as its default management address, accessing its admin panel is straightforward. Open your preferred web browser (Chrome, Firefox, Edge, or Opera) and type http://192.168.0.2 directly into the address bar, then press Enter. You should be presented with a login page asking for a username and password.

Before you can reach the 192.168.0.2 admin panel, your computer must be on the same subnet. This means your PC or laptop needs a static IP address in the 192.168.0.x range — for example, 192.168.0.10 — with a subnet mask of 255.255.255.0. If your computer is set to obtain an IP automatically via DHCP and your router's gateway is 192.168.0.1, you may already be on the correct subnet. If you are unsure, open the Command Prompt on Windows and type ipconfig, or open Terminal on macOS and type ifconfig, to check your current IP configuration.

Because 192.168.0.2 is a private IP address, it is not accessible from the internet — only devices physically connected to the same local network can reach it. This is by design and is a core feature of private IPv4 addressing under RFC 1918.

If You Can't Access 192.168.0.2

If typing http://192.168.0.2 into your browser returns an error, a timeout, or a "site can't be reached" message, there are several things you should check before assuming the device is faulty.

• Verify your subnet: Your computer must be in the 192.168.0.x range to communicate with 192.168.0.2. Run ipconfig (Windows) or ifconfig (macOS/Linux) and confirm your IPv4 address starts with 192.168.0. If it doesn't, manually assign your PC a static IP such as 192.168.0.10 with subnet mask 255.255.255.0.
• Check your cable or Wi-Fi connection: For devices like the KTI KS-2260 switch, you must be connected via an Ethernet cable directly to the device. Wireless access may not be available for management purposes on these models.
• The IP may have been changed: If someone previously changed the management IP of your Conceptronic C150APM or KTI switch away from 192.168.0.2, you will need to perform a factory reset to restore it. See the reset instructions below.
• IP conflict: If another device on your network has been assigned 192.168.0.2 (for example, by your router's DHCP server), there will be an address conflict. Disconnect other devices or check your router's DHCP lease table to identify conflicts.
• Try a different browser: Some admin panels do not render correctly in modern browsers. Try using a different browser or disabling browser extensions that may block local network access.

If none of the above resolves the issue, check our guide on how to find your router IP address to confirm what the correct management IP is for your specific device.

Conceptronic C150APM — Default IP 192.168.0.2

The Conceptronic C150APM is a 150 Mbps wireless access point that ships with a fixed static IP address of 192.168.0.2 and a subnet mask of 255.255.255.0. Unlike a router, this device does not run a DHCP server by default, so you must manually configure your computer to be in the same IP range before you can access its admin panel.

To log in to the Conceptronic C150APM admin panel at 192.168.0.2, use the following default credentials:

• Username: admin
• Password: admin

Once logged in, you can configure the wireless SSID, security settings (WPA2 recommended), channel selection, and transmission power. You should change the default password immediately after your first login to prevent unauthorised access to your access point's settings.

Factory Reset — Conceptronic C150APM

If you have forgotten the admin password for your Conceptronic C150APM and can no longer access the panel at 192.168.0.2, you will need to perform a hardware factory reset:

1. Ensure the C150APM is powered on.
2. Locate the small Reset button on the back or underside of the device.
3. Using a pin or paperclip, press and hold the Reset button for 10–15 seconds until the LEDs flash or the device reboots.
4. Release the button and wait for the device to fully restart (approximately 60 seconds).
5. The device will return to its factory default IP of 192.168.0.2, with username admin and password admin.

Remember to reconfigure your computer's IP address to the 192.168.0.x range after the reset if needed.

KTI Networks — Default IP 192.168.0.2

KTI Networks is a Taiwanese manufacturer of industrial and enterprise-grade networking equipment. Several of their managed switches — including the KS-2260, KGS-2422, and KGS-2423 — use 192.168.0.2 as their factory-default management IP address with a subnet mask of 255.255.255.0.

To access the web management interface of a KTI switch at 192.168.0.2, use the following default credentials:

• Username: Admin (capital A) or superuser
• Password: 123 or 123456 (varies by model)

KTI switches support multiple management methods including web browser access via 192.168.0.2, Telnet, SNMP, and console port access. The web interface allows you to configure VLANs, port trunking, QoS, spanning tree, and IGMP snooping, among other enterprise features.

Factory Reset — KTI Networks Switches

To restore a KTI Networks switch to its factory defaults and recover the 192.168.0.2 management IP:

1. Power off the switch by unplugging the power cord.
2. Locate the Reset button on the device's front or rear panel.
3. Press and hold the Reset button while plugging the power cord back in.
4. Continue holding the Reset button for approximately 10 seconds until the port LEDs flash.
5. Release the button. The switch will reboot and restore all settings to factory defaults, including the management IP of 192.168.0.2.

Changing Your Password at 192.168.0.2

Whether you are managing a Conceptronic C150APM access point or a KTI Networks switch, changing the default admin password is one of the most important steps you can take to secure your network. Default credentials like admin/admin or Admin/123 are publicly known and leave your device vulnerable to unauthorised access — especially if your network is shared or accessible to multiple users.

To change your password after logging in to 192.168.0.2:

1. Open your browser and navigate to http://192.168.0.2.
2. Log in with your current credentials (or the defaults listed above if you haven't changed them yet).
3. Navigate to the Administration, System, or Management section of the interface — the exact label depends on your device model.
4. Find the Password or Change Password option.
5. Enter your current password, then type your new password twice to confirm.
6. Click Save or Apply to store the new credentials.

Choose a strong password that is at least 12 characters long and includes a mix of uppercase letters, lowercase letters, numbers, and symbols. Avoid using easily guessable information such as your name, address, or the device's IP address itself.

Router Username and Password List

What Is 192.168.0.2 as a Private IP Address?

192.168.0.2 is a Class C private IPv4 address defined under RFC 1918. The entire 192.168.0.0 – 192.168.255.255 range is reserved exclusively for private network use and is never routed on the public internet. Within the 192.168.0.0/24 subnet, there are 254 usable host addresses — from 192.168.0.1 to 192.168.0.254 — and 192.168.0.2 is the second address in that range.

In most home and small-office networks where the router's gateway is set to 192.168.0.1, the DHCP server will typically begin assigning addresses from 192.168.0.2 onward. This means the first device you connect to your network — whether a laptop, smartphone, or smart TV — will often receive 192.168.0.2 as its private IP. Subsequent devices receive 192.168.0.3, 192.168.0.4, and so on.

Because 192.168.0.2 is so close to the gateway address, it is also commonly used as a static IP for servers, printers, NAS devices, and network cameras that need a predictable, permanent address on the local network. Assigning a static IP ensures the device is always reachable at the same address, regardless of DHCP lease renewals.

It's worth noting that only one device at a time can use 192.168.0.2 on a given network. If two devices are assigned the same IP — whether through a DHCP conflict or manual misconfiguration — both will experience connectivity issues. Always check your router's DHCP lease table or use a network scanner to confirm that 192.168.0.2 is not already in use before assigning it statically to a device.

192.168.0.2 in the Context of the 192.168.0.0/24 Subnet

Understanding where 192.168.0.2 sits within its subnet helps you manage your network more effectively. The 192.168.0.0/24 network has the following key properties:

• Network address: 192.168.0.0 (not assignable to devices)
• Broadcast address: 192.168.0.255 (not assignable to devices)
• Usable host range: 192.168.0.1 – 192.168.0.254 (254 addresses)
• Subnet mask: 255.255.255.0
• Default gateway (typical): 192.168.0.1

Within this subnet, 192.168.0.2 is the first available host address after the gateway. Other commonly used addresses in this range include:

• 192.168.0.1 — The most common default gateway for routers on this subnet (used by Netgear, D-Link, TP-Link, and many others)
• 192.168.0.100 – 192.168.0.200 — Typical DHCP pool range used by many routers
• 192.168.0.254 — Used as an alternative gateway by some router models

If you are setting up a dual-router or cascaded network configuration, 192.168.0.2 is a popular choice for the secondary router's LAN IP, keeping it clearly distinct from the primary gateway at 192.168.0.1 while remaining on the same subnet for easy management.

Frequently Asked Questions About 192.168.0.2

Is 192.168.0.2 a router IP address?

Yes — in specific cases. The Conceptronic C150APM wireless access point and several KTI Networks managed switches (KS-2260, KGS-2422, KGS-2423) use 192.168.0.2 as their factory-default management IP. However, for most home networks, 192.168.0.2 is not the router's gateway address — that role is typically filled by 192.168.0.1. Instead, 192.168.0.2 is usually the first IP address assigned by the DHCP server to a connected client device.

Why does my device show 192.168.0.2 as its IP address?

If your computer, phone, or tablet shows 192.168.0.2 as its IP address, it means your router's DHCP server assigned it this address. This is completely normal on networks where the gateway is 192.168.0.1. Your device is the first (or only) device connected to the network, and 192.168.0.2 is the first address in the DHCP pool. You can access your router's admin panel by navigating to 192.168.0.1 — not 192.168.0.2 — in your browser.

Can I use 192.168.0.2 as a static IP for my printer or server?

Absolutely. Assigning 192.168.0.2 as a static IP to a printer, NAS, server, or network camera is a common and recommended practice. It ensures the device is always reachable at the same address. To do this safely, either configure the static IP directly on the device, or set up a DHCP reservation in your router's admin panel (accessible at 192.168.0.1) so the router always assigns 192.168.0.2 to that specific device's MAC address. Make sure no other device is already using 192.168.0.2 to avoid IP conflicts.

What is the default username and password for 192.168.0.2?

The default credentials for devices that use 192.168.0.2 as their management IP are:
Conceptronic C150APM: Username: admin / Password: admin
KTI Networks KS-2260: Username: Admin or superuser / Password: 123 or 123456
If these credentials do not work, the password has likely been changed. You will need to perform a factory reset to restore the defaults and regain access to the 192.168.0.2 admin panel.

How do I fix an IP address conflict at 192.168.0.2?

An IP conflict at 192.168.0.2 occurs when two devices on your network share the same address. To resolve it: log in to your router's admin panel at 192.168.0.1, navigate to the DHCP client list or ARP table, and identify which devices are using 192.168.0.2. Disconnect one of the conflicting devices, then either change its static IP or allow it to obtain a new address via DHCP. You can also narrow your DHCP pool to exclude 192.168.0.2 if you want to reserve it for a specific device.

What other IP addresses are related to 192.168.0.2?

192.168.0.2 belongs to the 192.168.0.0/24 subnet. Other commonly referenced addresses in this network include 192.168.0.1 (the most common default gateway), as well as other popular private gateways such as 192.168.1.254, 192.168.2.1, 192.168.8.1, 192.168.10.1, 192.168.100.1, and 10.0.0.1.