192.168.0.102 Admin Login

192.168.0.102 is a Class C private IPv4 address that falls within the 192.168.0.0/24 subnet — one of the most widely used private network ranges in home and small-office environments. While most routers in this subnet use 192.168.0.1 as their default gateway, 192.168.0.102 is notably used by Netgear as the factory-default IP address for specific devices, most prominently the Netgear WGPS606 — a 54 Mbps Wireless USB Print Server. According to Netgear's official documentation, after a factory restore, the WGPS606 defaults to the LAN IP address of 192.168.0.102. Beyond that specific device, 192.168.0.102 is also commonly assigned as a dynamic IP address by DHCP servers to client devices (computers, smartphones, tablets, smart TVs, and printers) connected to any router operating in the 192.168.0.x network range. Whether you're trying to access a Netgear print server admin panel or simply understand what this address means on your network, this guide covers everything you need to know.

How to Access 192.168.0.102

To access the admin interface at 192.168.0.102, open your preferred web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.0.102 directly into the address bar. Do not type it into a search engine, as that will return search results rather than your device's login page. Press Enter and wait for the login prompt to appear.

If you are accessing a Netgear WGPS606 print server, the default credentials are:

• Username: admin
• Password: password

Once logged in, you'll have access to the device's full configuration panel, where you can manage wireless settings, connected printers, network security, firmware updates, and more. Make sure your computer or device is connected to the same local network — either via an Ethernet cable or Wi-Fi — before attempting to reach 192.168.0.102. Because this is a private IPv4 address, it is only reachable from within your local network and is completely invisible to the public internet.

If you are not using a Netgear WGPS606 and 192.168.0.102 is simply the IP address your router's DHCP server has assigned to your computer or another device, then navigating to this address in a browser will not open a router admin panel. In that case, you should instead navigate to your actual default gateway — most commonly 192.168.0.1 or 192.168.1.1.

Router Brands That Use 192.168.0.102

Unlike the most common default gateway addresses such as 192.168.0.1 or 192.168.1.1, the IP address 192.168.0.102 is not a typical default gateway for mainstream routers. However, it is specifically documented as the factory-default IP for the following Netgear device:

• Netgear WGPS606 — 54 Mbps Wireless USB 2.0 Print Server. This device resets to 192.168.0.102 after a factory restore, with DHCP client enabled by default.

Beyond the WGPS606, a wide range of Netgear routers and access points operate within the 192.168.0.x subnet and may assign 192.168.0.102 dynamically to connected client devices via DHCP. These include popular Netgear models such as the WGR614, WGT624, WPN824, WNDR3700, WNDR4300, WNDR4500, WNR1000, WNR2000, WNR3500L, and many others in the Netgear lineup. If your device has been assigned 192.168.0.102 by one of these routers, it means your router's DHCP pool is actively distributing addresses in the 192.168.0.x range, and 192.168.0.102 is simply the address your device received at that moment.

In summary, if you are specifically trying to log in to an admin panel at 192.168.0.102, the most likely device is the Netgear WGPS606 print server. For all other Netgear routers in this subnet, your actual admin gateway is typically 192.168.0.1.

If You Can't Access 192.168.0.102

If typing http://192.168.0.102 into your browser returns an error such as "This site can't be reached" or "Connection refused," there are several possible explanations and fixes:

1. You're not on the right network: Make sure your computer, phone, or tablet is connected to the same Wi-Fi or wired network as the device at 192.168.0.102. Private IP addresses are only reachable from within the local network.
2. The IP has been changed: If you're trying to access a Netgear WGPS606 and the default IP was previously changed from 192.168.0.102 to something else, you'll need to perform a factory reset to restore it. See the factory reset section below.
3. 192.168.0.102 is not your gateway: If you're trying to reach your router's admin panel, 192.168.0.102 may not be your router's IP. Open the Command Prompt on Windows (Start > type cmd > press Enter) and run ipconfig. Look for the Default Gateway value. On a Mac, go to System Settings > Network > your connection > Details, and check the Router field. Alternatively, check our guide to find your router IP address.
4. Firewall or browser issue: Temporarily disable your firewall or try a different browser. Some security software can block access to local network admin pages.
5. Bad cable or wireless interference: If using a wired connection, try a different Ethernet cable. If on Wi-Fi, move closer to the router and reconnect.

Factory Reset for Netgear Devices Using 192.168.0.102

If you've forgotten the admin password for your Netgear WGPS606 or any other Netgear device that uses 192.168.0.102, a factory reset will restore all settings — including the IP address — back to their defaults. Here's how to do it:

1. Locate the Reset button on the back or bottom of your Netgear device. It is typically a small recessed button labeled "Reset" or "Factory Reset."
2. Use a paperclip or pin to press and hold the Reset button for at least 10 seconds while the device is powered on. You'll see the LEDs flash or change, indicating the reset is in progress.
3. Release the button and wait for the device to reboot. This may take 1–2 minutes.
4. Once rebooted, the device will return to its factory defaults:
   • IP Address: 192.168.0.102
   • Username: admin
   • Password: password
5. Reconnect your computer to the network and navigate to http://192.168.0.102 in your browser to access the admin panel.

Important: A factory reset will erase all custom configurations, including your wireless settings, port forwarding rules, and any custom passwords. Make sure to back up your settings before performing a reset if possible.

Changing the Password on a Device at 192.168.0.102

Once you've successfully logged into the admin panel at 192.168.0.102, one of the first things you should do is change the default password. Leaving the default credentials in place makes your device vulnerable to unauthorized access by anyone on your local network. To change the password on a Netgear WGPS606 or similar Netgear device:

1. Log in to http://192.168.0.102 using the default credentials (admin / password).
2. Navigate to the Administration or System section of the control panel.
3. Look for a Set Password or Change Password option.
4. Enter your current password, then type your new password twice to confirm.
5. Click Apply or Save to store the new password.

Choose a strong password that includes a mix of uppercase and lowercase letters, numbers, and special characters. Avoid using easily guessable passwords like your name, address, or the word "password." Once changed, store your new password in a secure location such as a password manager.

Router Username and Password List

What Is 192.168.0.102 as a Private IP Address?

192.168.0.102 is a Class C private IPv4 address defined by RFC 1918. The entire 192.168.0.0 – 192.168.255.255 range is reserved exclusively for private network use, meaning these addresses are never routed on the public internet. Your ISP and the global internet infrastructure will never recognize or respond to traffic from 192.168.0.102 — it only exists and functions within your local network.

Within your home or office network, 192.168.0.102 can serve one of two roles:

• As a device's assigned IP: Your router's DHCP server automatically assigns 192.168.0.102 to a connected device — such as a laptop, smartphone, smart TV, or printer — when it joins the network. This assignment may change each time the device reconnects unless you configure a static IP reservation.
• As a device's static admin IP: Certain network devices, like the Netgear WGPS606 print server, use 192.168.0.102 as their fixed, factory-default management IP address. In this case, you can always reach the device's admin panel at this address (as long as it hasn't been changed).

The 192.168.0.0/24 subnet that contains 192.168.0.102 supports up to 254 usable host addresses (192.168.0.1 through 192.168.0.254). Your router typically occupies the first address (e.g., 192.168.0.1), and all other devices on the network receive addresses from the remaining pool. The subnet mask for this range is 255.255.255.0.

Because 192.168.0.102 is a private address, it offers an inherent layer of security — external attackers on the internet cannot directly target it. However, devices within your local network can communicate with it freely, which is why it's still important to use strong passwords on any admin interface accessible at this address.

Related IP Addresses in the 192.168.0.x Subnet

The IP address 192.168.0.102 belongs to the 192.168.0.0/24 network, which is one of the most commonly used private subnets in the world. Several other addresses in this range are also widely used as default gateways or admin interfaces for routers and network devices. Here are the most notable ones you should know about:

• 192.168.0.1 — The most common default gateway in the 192.168.0.x range, used by Netgear, D-Link, TP-Link, and many other brands as their primary admin IP.
• 192.168.1.254 — Used by some DSL routers and ISP-provided modems as an alternative default gateway address.
• 192.168.0.1 — The standard gateway for the 192.168.0.x subnet, and the address you should try if 192.168.0.102 does not load an admin panel.

Other commonly referenced private gateway addresses outside the 192.168.0.x subnet include 10.0.0.1, 192.168.1.1 (the most widely used default gateway globally), 192.168.2.1, 192.168.8.1, 192.168.10.1, and 192.168.100.1. If 192.168.0.102 is not working as an admin address for you, one of these alternatives may be your router's actual default gateway.

Frequently Asked Questions About 192.168.0.102

What router uses 192.168.0.102 as its default IP?

The most well-documented device that uses 192.168.0.102 as its factory-default IP address is the Netgear WGPS606 Wireless USB Print Server. According to Netgear's official documentation, after a factory reset, the WGPS606 defaults to 192.168.0.102 with DHCP client enabled. Other Netgear routers in the 192.168.0.x range may assign this address dynamically to connected client devices, but their admin gateway is typically 192.168.0.1.

Is 192.168.0.102 safe to use on my network?

Yes. 192.168.0.102 is a private IP address defined by RFC 1918 and is completely safe to use within your local network. It is not routable on the public internet, so external parties cannot access it directly. However, you should always protect any admin interface accessible at 192.168.0.102 with a strong, unique password.

Why is my device showing 192.168.0.102 as its IP address?

Your router's DHCP server has automatically assigned 192.168.0.102 to your device. This is normal behavior. The 102nd address in the 192.168.0.x pool was simply the next available address when your device connected. If you need a permanent, unchanging address for your device, you can configure a static IP reservation in your router's DHCP settings — typically found under LAN or DHCP settings in the admin panel at 192.168.0.1.

What is the default username and password for 192.168.0.102?

For the Netgear WGPS606, the factory-default credentials are username: admin and password: password. If these don't work, the password may have been changed previously. In that case, perform a factory reset by holding the Reset button for 10 seconds to restore the defaults and regain access at 192.168.0.102.

Can two devices on my network share the IP 192.168.0.102?

No. Every device on a network must have a unique IP address. If two devices are assigned 192.168.0.102 simultaneously, an IP address conflict will occur, causing connectivity issues for both devices. Your router's DHCP server is designed to prevent this automatically, but conflicts can occur if you manually assign static IPs without checking for existing assignments.

How do I find out if 192.168.0.102 is my router's gateway or just my device's IP?

On Windows, open Command Prompt and type ipconfig. Look at the Default Gateway field — if it shows 192.168.0.102, then that is your router's admin address. If the IPv4 Address field shows 192.168.0.102, then it is your device's assigned IP and your gateway is a different address (likely 192.168.0.1). On a Mac, go to System Settings > Network and check the Router field under your active connection.