10.10.100.254 Admin Login

10.10.100.254 is a Class A private IP address used as the default gateway by several router manufacturers and IoT networking devices. Brands that are known to use this address include Huawei, ZTE, various ISP-branded routers, PUSR IoT Wi-Fi modules, and Solarman solar inverter data loggers. Because it sits deep within the 10.0.0.0/8 Class A private range, it is especially popular in enterprise LAN segments, ISP-provisioned CPE equipment, and industrial IoT deployments where the more common 192.168.1.254 or 192.168.0.1 ranges are already in use. Only one device on any given network should be assigned 10.10.100.254 to prevent IP address conflicts.

How to Access 10.10.100.254

To reach your router or device's admin panel, make sure your computer or smartphone is connected to the same network — either via an Ethernet cable plugged into one of the LAN ports, or over Wi-Fi. Then open any web browser (Chrome, Firefox, Edge, or Safari) and type http://10.10.100.254 directly into the address bar at the top of the browser — not into a search box. Press Enter and the router's login page should load within a few seconds.

On the login screen, enter your username and password. For Huawei routers, the default credentials are typically admin / admin or admin / (blank), and the password may also be printed on the label on the bottom of the device. ZTE routers commonly use admin / admin or a model-specific password printed on the router's sticker. PUSR IoT Wi-Fi modules and Solarman data loggers both default to admin / admin. Always check the physical label on your device first, as ISP-branded units often ship with a unique password.

Once logged in, you can manage your wireless network name (SSID), Wi-Fi password, DHCP settings, port forwarding rules, firmware updates, and much more from the admin dashboard.

If You Can't Access 10.10.100.254

If typing http://10.10.100.254 into your browser produces an error, a blank page, or redirects you to a search engine, work through the following checks:

• Confirm your gateway address: Open a Command Prompt (Windows: Start > cmd, then type ipconfig /all) or a Terminal (macOS/Linux: type netstat -nr). Look for the Default Gateway field. If it shows a different address, that is the correct IP to use instead of 10.10.100.254.
• Check your network connection: Make sure the Ethernet cable is firmly seated in both your computer and the router's LAN port, or that your Wi-Fi is connected to the correct network. A disconnected cable is one of the most common reasons the admin page won't load.
• Use the correct browser field: Type 10.10.100.254 into the address bar at the very top of the browser window — not into Google's or Bing's search box on the homepage.
• Disable VPN or proxy software: Active VPN connections reroute your traffic and can prevent access to local private addresses like 10.10.100.254. Temporarily disconnect your VPN and try again.
• Set your PC to obtain an IP automatically: If your computer has a manually configured static IP that is outside the 10.10.100.0/24 subnet, it won't be able to reach the gateway. Go to Network Connections > TCP/IPv4 Properties and select Obtain an IP address automatically.
• Try a different browser or clear the cache: Cached DNS entries or browser extensions can interfere. Try an incognito/private window or a different browser entirely.

If none of the above resolves the issue, the router's default IP may have been changed by a previous administrator. In that case, a factory reset is the most reliable way to restore 10.10.100.254 as the gateway address.

Factory Reset Instructions for Routers Using 10.10.100.254

A factory reset erases all custom settings — including any changed IP address, Wi-Fi name, password, and port-forwarding rules — and restores the device to its out-of-box state, making 10.10.100.254 accessible again. Only perform a reset if you have exhausted all other options, as you will need to reconfigure your network from scratch.

Huawei Routers

Locate the small RESET pinhole on the back or bottom of your Huawei router. With the router powered on, insert a straightened paperclip or SIM-eject pin and hold the button for 8–10 seconds. The indicator LEDs will flash and the device will reboot automatically. Once it restarts, the Wi-Fi name, Wi-Fi password, and admin credentials will all revert to the defaults printed on the bottom label. You can also perform a soft reset through the Huawei AI Life app or via the web management page under System > Factory Reset, with an option to retain your Wi-Fi name and password if desired.

ZTE Routers

Power on your ZTE router and find the RESET button — usually a recessed pinhole on the rear panel. Press and hold it for approximately 10 seconds using a pin or paperclip until the power LED blinks rapidly, then release. The router will reboot and restore factory defaults. Default credentials for most ZTE models are admin / admin, though some newer models (e.g., ZXHN H298Q) use a password derived from the last four digits of the serial number printed on the label.

PUSR IoT Wi-Fi Modules & Solarman Data Loggers

For PUSR IoT modules, connect your PC to the module's own Wi-Fi access point, navigate to http://10.10.100.254, log in with admin / admin, and use the web interface's restore/reset option. For Solarman Wi-Fi sticks, connect your phone to the inverter's AP network (e.g., AP_XXXXXXXX), open http://10.10.100.254 in a browser, and follow the on-screen reset procedure. Both devices default to admin / admin after a reset.

Changing Your Router Password at 10.10.100.254

Keeping the default password on any router is a significant security risk. Once you have logged into the admin panel at 10.10.100.254, navigate to the Administration, System, or Account Management section — the exact label varies by brand. On Huawei routers, look under Advanced > System > Login Password. On ZTE devices, find it under Maintenance > Account. You will be prompted to enter your current password and then type your new password twice for confirmation.

Choose a strong password that is at least 12 characters long and combines uppercase letters, lowercase letters, numbers, and symbols. Avoid using easily guessable information such as your address or birthday. After saving, you will be logged out and must re-enter the new credentials to regain access. Store the new password in a secure password manager so you don't lose access to 10.10.100.254 in the future.

Router Username and Password List

What Is 10.10.100.254 and Why Is It a Class A Private Address?

10.10.100.254 belongs to the 10.0.0.0/8 Class A private address block, which was reserved by the Internet Assigned Numbers Authority (IANA) under RFC 1918 for use exclusively within private networks. Unlike public IP addresses, 10.10.100.254 is not routable on the public internet — it can only be reached by devices on the same local network. This makes it inherently safe from direct external access.

The full Class A private range spans 10.0.0.0 to 10.255.255.255, giving network administrators over 16 million possible addresses to work with. This enormous range is why the 10.x.x.x block is the preferred choice for large enterprise networks, ISP infrastructure, industrial IoT systems, and carrier-grade equipment — environments where the smaller 192.168.x.x range (which offers only 65,536 addresses) would quickly run out of space.

Within the 10.10.100.0/24 subnet, the address 10.10.100.254 is deliberately chosen as the gateway because it sits at the very high end of the usable host range (10.10.100.1 – 10.10.100.254), making it easy to remember and unlikely to conflict with DHCP-assigned client addresses, which typically start from the lower end of the range. The subnet supports up to 254 host devices, each receiving a unique address between 10.10.100.1 and 10.10.100.254.

When you connect a laptop, smartphone, smart TV, or any other device to a router using 10.10.100.254 as its gateway, your device is automatically assigned an address in the same subnet — for example, 10.10.100.2, 10.10.100.3, and so on — via DHCP. The router then acts as the bridge between your private 10.10.100.0/24 network and the public internet, translating addresses through a process called Network Address Translation (NAT).

Related IP Addresses in the 10.10.100.0/24 Subnet

If 10.10.100.254 is your router's default gateway, the following addresses are part of the same 10.10.100.0/24 subnet and may be relevant to your network setup:

• 10.10.100.1 — An alternative gateway address sometimes used by ISP routers and managed switches as the primary LAN interface.
• 10.10.100.2 – 10.10.100.100 — Typically the DHCP pool range, automatically assigned to client devices such as laptops, phones, and tablets connecting to your network.
• 10.10.100.101 – 10.10.100.200 — Often reserved for static IP assignments given to servers, printers, NAS devices, IP cameras, and other infrastructure that needs a consistent address.
• 10.10.100.253 — Sometimes used as a secondary gateway or a redundant router interface in high-availability setups.
• 10.10.100.255 — The broadcast address for this subnet. It cannot be assigned to any device and is used by the network to send messages to all hosts simultaneously.

Other commonly used private gateway addresses you may encounter on different networks include 192.168.0.1, 10.0.0.1, 192.168.1.254, 192.168.100.1, and 192.168.8.1.

Frequently Asked Questions About 10.10.100.254

Which router brands use 10.10.100.254 as their default gateway?

The brands most commonly associated with 10.10.100.254 are Huawei, ZTE, ISP-branded CPE routers (particularly those deployed by telecom providers in Asia and the Middle East), PUSR IoT Wi-Fi serial modules, and Solarman solar inverter data loggers. If you are unsure whether your device uses this address, check the sticker on the bottom or back of the unit — it will list the default gateway, username, and password.

Is 10.10.100.254 safe to access?

Yes. Because 10.10.100.254 is a Class A private IP address, it is only reachable from within your local network. No one on the internet can directly connect to it. That said, you should still protect your admin panel with a strong, unique password to prevent unauthorized access from devices already on your network.

Can I change my router's IP address from 10.10.100.254 to something else?

Yes. After logging into the admin panel at http://10.10.100.254, navigate to the LAN settings section and enter a new IP address for the router. Common alternatives within the same Class A range include 10.10.100.1 or 10.10.100.100. Be aware that once you save the change, the router will be unreachable at 10.10.100.254 — you must use the new address going forward. Write it down before saving.

What should I do if 10.10.100.254 opens my ISP's login page instead of my router's admin panel?

Some ISPs configure their equipment so that the gateway address (10.10.100.254) leads to a subscriber authentication portal rather than the router's own settings interface. In this case, contact your ISP for access credentials or ask them to provide a separate admin login. Alternatively, check whether your router has a secondary management address listed on its label.

What is the default username and password for 10.10.100.254?

The most common default credentials for devices using 10.10.100.254 are Username: admin / Password: admin. However, this varies by brand and model. Huawei routers may use admin / admin or a password printed on the device label. ZTE models often use admin / admin or a serial-number-derived password. PUSR IoT modules and Solarman loggers both default to admin / admin. Always check the physical label on your device for the most accurate information.

How do I find my router's IP address if it's not 10.10.100.254?

On Windows, open Command Prompt and type ipconfig /all — look for the Default Gateway value. On macOS, go to System Preferences > Network > Advanced > TCP/IP and check the Router field. On Android or iOS, tap your connected Wi-Fi network in settings and look for the gateway address. You can also check our guide on how to find your router IP address.