10.0.0.10 Admin Login

10.0.0.10 is a Class A private IPv4 address used as the default gateway by select networking equipment manufacturers, most notably BDCOM (including the GP1704F-E ONU series) and Celeno (VXT1025 model). Additional brands such as Billion and Intelbras have also been documented using this address on specific device models. Because it falls within the 10.0.0.0/8 private range — the largest private address block defined by RFC 1918 — 10.0.0.10 is fully routable within any local area network but is never forwarded across the public internet. Other widely used default gateways in the same Class A space include 10.0.0.1, while popular alternatives from other private ranges include 192.168.1.254 and 192.168.8.1.

How to Access 10.0.0.10

To reach your router's admin panel at 10.0.0.10, make sure your computer or mobile device is connected to the router — either via an Ethernet cable plugged into one of the LAN ports, or over Wi-Fi. Then open any web browser (Chrome, Firefox, Edge, Safari) and type http://10.0.0.10 directly into the address bar. Do not type it into a search engine — paste it into the URL bar and press Enter.

If your device is connected correctly, you will see a login prompt asking for a username and password. For BDCOM devices using 10.0.0.10, the most common default credentials are user / 123456 or admin / admin. For Celeno VXT1025 devices, check the sticker on the bottom or back of the unit, as credentials may be device-specific. Once logged in, you can manage your wireless network name (SSID), Wi-Fi password, DHCP settings, port forwarding, firewall rules, and firmware updates — all from within the admin dashboard.

It is worth noting that 10.0.0.10 sits at host position .10 within the 10.0.0.0/24 subnet, meaning it is not the very first usable host address. This is intentional for some manufacturers who reserve lower addresses (like 10.0.0.1 through 10.0.0.9) for other internal purposes such as DHCP pools or secondary management interfaces.

If You Can't Access 10.0.0.10

If typing http://10.0.0.10 into your browser produces an error, a timeout, or simply loads nothing, there are several things you should check before assuming the address is wrong:

• Verify your connection: Your device must be on the same local network as the router. If you are connected to a different Wi-Fi network or using a VPN, the admin page will not load.
• Check your actual gateway: Open a command prompt (Windows: press Win + R, type cmd, press Enter, then type ipconfig) or a terminal (Mac/Linux: type ip route or netstat -nr). Look for the Default Gateway value. If it shows something other than 10.0.0.10, that is your real admin IP.
• Try a wired connection: Plug an Ethernet cable directly from your computer into one of the router's LAN ports. This eliminates any wireless interference or DHCP assignment issues.
• Disable browser extensions: Ad blockers or proxy extensions can sometimes interfere with loading local IP addresses. Try an incognito/private window.
• Clear your browser cache: Old cached data can occasionally prevent the login page from loading correctly.

If none of the above resolves the issue, your router's default gateway may have been changed from 10.0.0.10 to a different address. In that case, you will need to perform a factory reset to restore it. See the reset instructions below.

Factory Reset for Routers Using 10.0.0.10

If you have forgotten your admin password, or if the 10.0.0.10 address is no longer responding because someone changed the router's default gateway, a factory reset is your best option. Here is how to do it for the main brands that use this IP:

BDCOM (GP1704F-E ONU and related models)

1. Make sure the device is powered on and all indicator lights are active.
2. Locate the small Reset button on the back or bottom panel of the unit — it is usually recessed and requires a pin, toothpick, or paperclip to press.
3. Press and hold the Reset button for approximately 10–15 seconds until the indicator lights flash or change pattern, signalling that the reset has begun.
4. Release the button and wait for the device to fully reboot — this typically takes 60–90 seconds.
5. Once rebooted, open your browser and navigate to http://10.0.0.10. Log in with the factory default credentials printed on the device label (commonly user / 123456 or admin / admin).

Celeno VXT1025

1. Ensure the router is powered on.
2. Find the recessed Reset pinhole on the device chassis.
3. Insert a pin or paperclip and hold for 20 seconds until the device restarts.
4. After the reboot completes, access the admin panel at http://10.0.0.10 using the credentials from the device sticker.

Important: A factory reset will erase all custom settings — including your Wi-Fi name, password, port forwarding rules, and any other configurations you have made. Make sure to note down your ISP settings (PPPoE username/password, VLAN IDs, etc.) before resetting, so you can reconfigure the device afterwards.

Changing Your Router Password at 10.0.0.10

Keeping the default admin password on any router is a significant security risk. If your device uses 10.0.0.10 as its gateway — whether it is a BDCOM ONU, a Celeno VXT1025, or another brand — you should change the admin password as soon as you complete the initial setup. Here is how:

1. Log in to the admin panel at http://10.0.0.10 using your current credentials.
2. Navigate to the Administration, System, or Management section — the exact label varies by brand and firmware version.
3. Look for a Change Password or Admin Password option.
4. Enter your current password, then type your new password twice to confirm.
5. Click Save or Apply. The router may log you out automatically — simply log back in with your new credentials.

A strong router password should be at least 12 characters long and include a mix of uppercase letters, lowercase letters, numbers, and symbols. Avoid using easily guessable information such as your name, address, or the router's brand name. Also remember to change your Wi-Fi password separately — the admin password and the Wi-Fi password are two different credentials on most routers.

Router Username and Password List

What Kind of IP Address is 10.0.0.10?

10.0.0.10 is a Class A private IPv4 address. The entire 10.0.0.0/8 block — covering addresses from 10.0.0.0 to 10.255.255.255 — is reserved for private use under RFC 1918. This means no internet service provider will route traffic to or from this address across the public internet, making it safe to use on any internal network without risk of conflicting with public IP space.

The Class A designation comes from the fact that the first octet (10) falls within the range of 1–126, which historically defined Class A networks. Class A networks are the largest possible private networks, capable of supporting over 16 million unique host addresses within a single network block. In practice, most home and small-office networks using the 10.x.x.x range are subnetted into much smaller segments — typically a /24 subnet (e.g., 10.0.0.0/24), which provides 254 usable host addresses.

Within the 10.0.0.0/24 subnet, 10.0.0.10 is the tenth usable host address. When a router uses this address as its default gateway, connected devices will typically receive addresses from the same subnet via DHCP — for example, 10.0.0.2, 10.0.0.3, 10.0.0.4, and so on. Each device on the network gets its own unique private IP so the router can correctly direct traffic to and from the internet on its behalf.

Beyond home networking, the broader 10.0.0.0/8 space is extremely popular in enterprise environments, data centres, and cloud platforms (such as AWS VPCs and Azure VNets), precisely because of its enormous address capacity. Addresses like 10.0.0.10 are frequently assigned to servers, virtual machines, network appliances, and management interfaces in these environments.

Related IP Addresses in the 10.0.0.0 Subnet

If you are working within a network that uses 10.0.0.10 as its gateway, you will likely encounter several other addresses in the same 10.0.0.0/24 subnet. Here are the most commonly referenced ones and their typical roles:

• 10.0.0.1 — The most widely used default gateway in the 10.0.0.x range, used by brands such as Xfinity/Comcast gateways, certain D-Link models, and Apple AirPort devices. If 10.0.0.10 is not your gateway, 10.0.0.1 is the next address to try.
• 10.0.0.2 — Often the first address assigned by DHCP to a connected device when the router's gateway is 10.0.0.1 or 10.0.0.10. Also used as a default IP by some Zoom ADSL modem/router models.
• 10.0.0.138 — A common DHCP-assigned address in the upper portion of the 10.0.0.x range, sometimes seen in ISP-managed home gateway configurations.
• 10.0.0.254 — The last usable host address in the 10.0.0.0/24 subnet, occasionally used as an alternative gateway address by network administrators who prefer to place the router at the top of the address range.

Other popular private gateway addresses outside the 10.x.x.x range that you may want to explore include 192.168.0.1, 192.168.2.1, 192.168.100.1, and 192.168.10.1.

Frequently Asked Questions About 10.0.0.10

Which routers use 10.0.0.10 as their default gateway?

The brands most commonly documented as using 10.0.0.10 as their factory-default gateway address are BDCOM (particularly the GP1704F-E ONU and related fiber optical network unit models) and Celeno (specifically the VXT1025 model). Brands such as Billion and Intelbras have also been associated with this address on certain device variants. If you are unsure whether your router uses 10.0.0.10, check the label on the bottom or back of the device — the default gateway IP is almost always printed there alongside the default Wi-Fi credentials.

Is 10.0.0.10 the same as 10.0.0.1?

No — 10.0.0.10 and 10.0.0.1 are two distinct IP addresses, even though they look similar. 10.0.0.1 is far more commonly used as a default gateway (by brands like Xfinity and certain D-Link models), while 10.0.0.10 is used by a smaller set of manufacturers including BDCOM and Celeno. Typing the wrong address into your browser will result in a connection error or a blank page. Always verify your exact gateway address using the ipconfig (Windows) or ip route (Linux/Mac) command.

What do I do if 10.0.0.10 is not loading in my browser?

First, confirm that your device is connected to the correct network — the one managed by the router that uses 10.0.0.10 as its gateway. Run ipconfig on Windows or ip route on Mac/Linux to verify your Default Gateway. If it shows a different address, use that address instead. If you are connected correctly but the page still won't load, try a different browser, disable any VPN or proxy, or connect via a wired Ethernet cable. If the issue persists, a factory reset of your BDCOM or Celeno device will restore 10.0.0.10 as the default gateway.

What are the default login credentials for 10.0.0.10?

The default credentials vary by brand. For BDCOM routers and ONUs using 10.0.0.10, the most common combinations are user / 123456 and admin / admin. For Celeno VXT1025 devices, the credentials are typically printed on the device label. If none of the standard combinations work, it likely means someone has already changed the password — in which case you will need to perform a factory reset (hold the Reset button for 10–20 seconds) to restore the defaults.

Can I change my router's IP from 10.0.0.10 to something else?

Yes. Once you are logged into the admin panel at http://10.0.0.10, navigate to the LAN Settings or Network Settings section. You will find an option to change the router's LAN IP address. You can switch it to any valid private IP — such as 192.168.1.254 or another address in the 10.x.x.x range. After saving, the router will reboot and you will need to use the new address to access the admin panel going forward. Note that changing the gateway IP will also shift the DHCP range, so connected devices may need to renew their IP leases.

Is 10.0.0.10 a public or private IP address?

10.0.0.10 is a private IP address. It belongs to the 10.0.0.0/8 Class A private range defined by RFC 1918. This means it is only reachable within your local network and is never exposed directly to the internet. Your router uses a separate public IP address (assigned by your ISP) to communicate with the outside world, while 10.0.0.10 handles internal traffic management between your router and the devices on your home or office network.