192.168.60.2 Admin Login

192.168.60.2 is a private Class C IPv4 address used as a default gateway by a variety of wireless routers, modem routers, and ADSL gateway devices. Unlike more universally recognized default IPs such as 192.168.1.254 or 192.168.0.1, this address sits in the less common 192.168.60.x subnet, making it a distinctive choice often found in custom network configurations, enterprise VLAN setups, and certain ISP-provisioned modem-router combos. If your router or gateway device uses 192.168.60.2, you can type http://192.168.60.2 directly into your browser's address bar to reach the admin login panel. From there, you can manage everything from your Wi-Fi name and password to advanced settings like DHCP, DNS, QoS, MAC filtering, and PPPoE configuration.

Because 192.168.60.2 falls within the 192.168.0.0/16 private address space defined by RFC 1918, it is not routable on the public internet. It is exclusively used within local area networks (LANs), meaning only devices physically or wirelessly connected to your router can communicate with it. This makes it inherently safe from direct external access, though proper password protection and firewall rules are still essential for your network's security.

How to Access 192.168.60.2

Accessing your router's admin panel at 192.168.60.2 is straightforward. Follow these steps to get into your router's control interface:

1. Connect to your network — Make sure your device (PC, laptop, or smartphone) is connected to the router either via an Ethernet cable or over Wi-Fi. You cannot reach 192.168.60.2 from outside the local network.
2. Open your web browser — Launch any modern browser such as Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari.
3. Enter the IP address — Type http://192.168.60.2 into the address bar and press Enter. Do not use a search engine — type it directly into the address bar.
4. Enter your credentials — On the login page, enter your router's username and password. If you have never changed these, check the label on the back or bottom of your router. Common defaults are admin / admin or admin / password.
5. Access the dashboard — Once logged in, you will have full access to your router's settings, including wireless configuration, LAN/WAN settings, DHCP management, firewall rules, and more.

Note that the admin interface may look different depending on your router's brand and firmware version. Some routers running on the 192.168.60.x subnet may use a custom ISP-branded interface rather than the manufacturer's default UI.

If You Can't Access 192.168.60.2

If entering http://192.168.60.2 in your browser does not bring up a login page, there are several possible reasons and fixes:

• Wrong gateway IP — 192.168.60.2 may not be your router's actual default gateway. Open the Command Prompt on Windows (Start > type cmd > press Enter) and run ipconfig /all. Look for the Default Gateway field. On macOS or Linux, run netstat -nr or check your network settings. If the gateway shown is different from 192.168.60.2, use that address instead.
• Not connected to the right network — Ensure your device is connected to the correct router. If you have multiple networks or access points, you may be connected to the wrong one.
• Browser cache or HTTPS issue — Try opening the page in a private/incognito window, or explicitly type http://192.168.60.2 (not https). Some browsers auto-redirect to HTTPS, which may fail for router admin pages.
• IP address was changed — A previous administrator may have changed the router's LAN IP from 192.168.60.2 to something else. In this case, you will need to perform a factory reset to restore the default address.
• Firewall or VPN interference — Disable any active VPN connections or firewall software temporarily and try again. VPNs in particular can reroute local traffic and block access to your gateway.

If none of the above resolves the issue, consult our guide on how to find your router IP address for more detailed troubleshooting steps.

Router Brands That Use 192.168.60.2

192.168.60.2 is best described as a general-purpose private IP address rather than the exclusive default of a single router brand. It is used across a range of wireless routers, ADSL modem-routers, and gateway devices — particularly in configurations where the standard 192.168.1.x or 192.168.0.x subnets are already in use or have been deliberately avoided. You are most likely to encounter 192.168.60.2 in the following scenarios:

• ISP-provisioned modem-routers — Some internet service providers configure their supplied gateway devices with non-standard subnets like 192.168.60.x to avoid conflicts with customer equipment already using the common 192.168.1.x range.
• MikroTik routers — MikroTik devices are highly configurable and are frequently set up with the 192.168.60.x subnet in enterprise, SOHO, and homelab environments. Network administrators often assign 192.168.60.1 or 192.168.60.2 as the LAN gateway when building VLAN-segmented networks.
• Cisco enterprise equipment — Cisco routers and layer-3 switches used in business environments are commonly configured with 192.168.60.x addressing for specific VLANs or network segments, with 192.168.60.2 serving as a secondary gateway or HSRP virtual IP.
• Ubiquiti UniFi systems — Ubiquiti's UniFi Dream Machine and UDM Pro platforms support multiple VLAN networks, and the 192.168.60.0/24 subnet is a popular choice for dedicated VLANs such as IoT, guest, or VPN networks, with 192.168.60.2 assigned as the gateway.
• Generic ADSL and wireless routers — Various lesser-known or white-label router manufacturers ship devices with 192.168.60.2 as the default admin IP, particularly in certain regional markets.

If you are unsure whether 192.168.60.2 is your router's default gateway, check the sticker on the bottom or back of your device, or refer to the printed manual that came in the box.

Changing Your Router's Password at 192.168.60.2

Keeping your router's admin password strong and unique is one of the most important steps you can take to protect your home or office network. If your router's admin panel is accessible at 192.168.60.2, here is how to update your password:

1. Log in to http://192.168.60.2 using your current credentials.
2. Navigate to the Administration, System, or Management section — the exact label depends on your router's firmware.
3. Look for a Set Password, Change Password, or Admin Password option.
4. Enter your current password, then type your new password twice to confirm it.
5. Click Save or Apply. Your router may reboot to apply the change.

Choose a password that is at least 12 characters long and includes a mix of uppercase letters, lowercase letters, numbers, and symbols. Avoid using easily guessable information such as your name, address, or the word "admin". Once changed, store your new password in a secure password manager so you do not lose access to your 192.168.60.2 admin panel in the future.

Router Username and Password List

How to Reset Your Router to Factory Defaults

If you have forgotten your admin credentials for the 192.168.60.2 login page, or if your router is behaving unexpectedly, a factory reset will restore all settings — including the IP address, username, and password — back to their original defaults. There are two main methods:

Method 1: Hardware Reset Button

1. Locate the Reset button on your router. It is usually a small pinhole button on the back or bottom of the device.
2. With the router powered on, use a straightened paperclip or a SIM ejector tool to press and hold the Reset button for 10–30 seconds (the exact duration varies by model).
3. Release the button when the router's indicator lights flash or change pattern, signaling that the reset is in progress.
4. Wait for the router to fully reboot — this typically takes 60–90 seconds.
5. Once rebooted, you can access the admin panel again at 192.168.60.2 using the original default credentials printed on the device label.

Method 2: Software Reset via Admin Panel

1. Log in to http://192.168.60.2 with your current credentials.
2. Go to Advanced > Administration > Backup Settings (or a similarly named section).
3. Click Revert to Factory Default Settings or Restore Factory Defaults.
4. Confirm the action when prompted. The router will reboot and restore all default settings.

Important: A factory reset will erase all custom configurations, including your Wi-Fi name (SSID), Wi-Fi password, port forwarding rules, and any other changes you have made. Make sure to back up your settings before proceeding if your router supports configuration export.

What Is a Private IP Address Like 192.168.60.2?

192.168.60.2 is a private IPv4 address belonging to the Class C private address range defined by the Internet Assigned Numbers Authority (IANA) under RFC 1918. The full Class C private range spans from 192.168.0.0 to 192.168.255.255, and 192.168.60.2 sits within the 192.168.60.0/24 subnet — a block of 256 addresses ranging from 192.168.60.0 to 192.168.60.255.

Private IP addresses like 192.168.60.2 are never routed over the public internet. They exist solely within local networks — your home, office, or any private LAN. Your router acts as the bridge between this private network and the public internet, using a process called Network Address Translation (NAT) to map your private addresses to a single public IP assigned by your ISP.

Here is how addressing typically works in a 192.168.60.x network:

• The router or gateway holds the address 192.168.60.2 (or 192.168.60.1) as its LAN IP.
• The first device that connects (e.g., your laptop) may receive 192.168.60.3 via DHCP.
• The second device (e.g., your smartphone) may receive 192.168.60.4.
• Additional devices continue to receive sequential addresses up to 192.168.60.254.

Every device on your network — computers, phones, tablets, smart TVs, printers, gaming consoles, and smart home gadgets — receives its own private IP address from the router's DHCP server. These addresses allow the router to correctly direct incoming and outgoing data to the right device. Without this system, your router would have no way of knowing which device requested a particular webpage or streaming video.

The 192.168.60.x subnet is less commonly used than the default 192.168.1.x or 192.168.0.x ranges, which actually makes it a smart choice for reducing the risk of IP conflicts — especially in environments where multiple routers, VPNs, or network segments are in use. If you connect to a corporate VPN that uses the 192.168.1.x range, for example, having your home network on 192.168.60.x prevents address collisions that could disrupt your connection.

Related IP Addresses in the 192.168.60.x Subnet

The 192.168.60.0/24 subnet contains 254 usable host addresses. While 192.168.60.2 is the focus of this page, several other addresses in this range and neighboring subnets are worth knowing about:

• 192.168.60.1 — The most common gateway address in the 192.168.60.x subnet. Many routers that use this subnet assign .1 as the default gateway rather than .2. If 192.168.60.2 does not work for you, try 192.168.60.1.
• 192.168.60.0 — The network address for this subnet. It is not assignable to any device.
• 192.168.60.255 — The broadcast address for the 192.168.60.0/24 subnet, used to send data to all devices on the network simultaneously.
• 192.168.60.100–192.168.60.200 — A typical DHCP pool range that routers in this subnet assign to connected client devices automatically.

If you are managing a network that uses 192.168.60.2 as its gateway, you may also want to familiarize yourself with other commonly used private gateway addresses, including 192.168.0.1, 192.168.2.1, 10.0.0.1, 192.168.100.1, 192.168.1.254, 192.168.8.1, and 192.168.10.1.

Frequently Asked Questions About 192.168.60.2

What is 192.168.60.2 used for?

192.168.60.2 is a private Class C IP address used as the default gateway or admin login address for wireless routers, ADSL modem-routers, and gateway devices operating on the 192.168.60.x subnet. You can access your router's admin panel by typing http://192.168.60.2 into your browser's address bar while connected to the network.

Which router brands use 192.168.60.2?

192.168.60.2 is a general-purpose private IP not exclusively tied to one brand. It is commonly encountered on MikroTik routers configured for VLAN or homelab setups, Cisco enterprise equipment using it for specific network segments, Ubiquiti UniFi systems with custom VLAN addressing, and various ISP-supplied modem-routers. Always check the label on your specific device to confirm its default gateway address.

What is the default username and password for 192.168.60.2?

The default credentials depend on your router's brand and model. The most common defaults are admin / admin or admin / password. Check the sticker on the back or bottom of your router for the exact default login information. If you have changed the credentials and forgotten them, you will need to perform a factory reset to restore the defaults.

Why can't I access 192.168.60.2?

If 192.168.60.2 is not loading in your browser, first confirm it is actually your router's gateway by running ipconfig /all (Windows) or netstat -nr (macOS/Linux) and checking the Default Gateway field. Also ensure you are connected to the correct network, that no VPN is active, and that you are typing http://192.168.60.2 (not https) directly into the address bar — not a search engine.

Is 192.168.60.2 safe to use?

Yes. As a private IP address, 192.168.60.2 is not accessible from the public internet and is confined to your local network. However, you should always change the default admin password on your router to prevent unauthorized access from anyone connected to your local network. Using a strong, unique password for your 192.168.60.2 admin panel is strongly recommended.

Can I change my router's IP from 192.168.60.2 to something else?

Yes. You can change your router's LAN IP address from within the admin panel at http://192.168.60.2. Navigate to the LAN or Network settings section and enter a new IP address. After saving, your router will reboot and the admin panel will only be accessible at the new address. Common alternatives include 192.168.0.1 or 10.0.0.1.

What is the subnet for 192.168.60.2?

192.168.60.2 belongs to the 192.168.60.0/24 subnet, which uses a subnet mask of 255.255.255.0. This subnet supports up to 254 usable host addresses, ranging from 192.168.60.1 to 192.168.60.254, with 192.168.60.255 reserved as the broadcast address.