192.168.2.10 Admin Login

192.168.2.10 is a private Class C IPv4 address that belongs to the 192.168.2.x subnet — a range widely associated with brands like SMC and Aerohive. Specifically, the SMC SMCWEBS-N, SMC SMCWGBR14, and SMC SR10000 models use 192.168.2.10 as their factory-set default gateway address, while the Aerohive HiveAP-20-ag access point also ships with 192.168.2.10 as its default management IP. If you own one of these devices, typing http://192.168.2.10 into your browser will take you directly to the router or access point's admin login page. On other networks operating in the 192.168.2.x range — such as those powered by Belkin or Edimax routers whose gateway is 192.168.2.1 — the address 192.168.2.10 is commonly assigned as a static or DHCP-leased IP to a client device such as a printer, NAS drive, IP camera, or desktop computer. Whether you are using it as a gateway or as a client address, understanding how 192.168.2.10 works within your network is key to managing your connection effectively.

How to Access 192.168.2.10

To reach the admin panel at 192.168.2.10, open any web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.2.10 directly into the address bar. Do not type it into a search engine, as that will return search results rather than your router's login page. Press Enter and you should be greeted with a login prompt asking for a username and password.

For SMC SMCWEBS-N and SMC SMCWGBR14 routers, the factory-default credentials are:

• Username: admin
• Password: smcadmin

For the Aerohive HiveAP-20-ag, the default credentials are:

• Username: root
• Password: aerohive

Once logged in, you will have full access to your device's configuration interface, where you can manage wireless settings, change your Wi-Fi password and SSID, configure DHCP reservations, set up port forwarding, update firmware, and more. Make sure the device you are using to access 192.168.2.10 is connected to the same network — either via an Ethernet cable or over Wi-Fi — otherwise the page will not load.

If You Can't Access 192.168.2.10

If entering http://192.168.2.10 in your browser produces an error or a blank page, there are several possible causes and fixes you should work through:

• Wrong gateway address: 192.168.2.10 may not be your router's current default gateway. Open the Command Prompt on Windows (Start > type cmd > Enter) and run ipconfig /all. Look for the Default Gateway field. On macOS or Linux, run netstat -nr or ip route in the Terminal. If the gateway shown is different — for example 192.168.2.1 — use that address instead.
• Not connected to the network: Confirm your computer or phone is connected to the router's Wi-Fi or plugged in via an Ethernet cable. A device on a different network cannot reach 192.168.2.10.
• IP address has been changed: A previous administrator may have changed the default gateway from 192.168.2.10 to something else. If you cannot determine the new address, a factory reset (see below) will restore it to 192.168.2.10.
• Browser cache or extension conflict: Try opening an incognito/private window, or use a different browser. Some ad-blockers or VPN extensions can interfere with local IP access.
• HTTP vs HTTPS: Some routers require http:// rather than https://. Make sure you are not being redirected to a secure version that your router does not support.

If none of the above resolves the issue, consult our guide to find your router IP address for a full walkthrough.

Router Brands That Use 192.168.2.10

Unlike more universal gateway addresses such as 192.168.1.254 or 192.168.10.1, the address 192.168.2.10 is associated with a small and specific set of hardware manufacturers. Here is a breakdown of the confirmed brands and models:

SMC Networks

SMC is the primary brand that ships routers with 192.168.2.10 as the default gateway. The following SMC models are confirmed to use this address out of the box:

• SMC SMCWEBS-N — Default login: admin / smcadmin
• SMC SMCWGBR14 — Default login: smcadmin / admin
• SMC SR10000 — Default login: admin / smcadmin

SMC's admin panel is a straightforward web-based interface accessible at 192.168.2.10. It is organized into tabbed sections covering Status, Setup, Wireless, Firewall, and Administration. The interface is lightweight and loads quickly even on older hardware. Note that the majority of SMC routers use 192.168.2.1 as their default gateway — only the specific models listed above default to 192.168.2.10.

Aerohive Networks

The Aerohive HiveAP-20-ag is a wireless access point that uses 192.168.2.10 as its default management IP address. Aerohive (now part of Extreme Networks) produces enterprise-grade Wi-Fi hardware, and the HiveAP-20-ag is a dual-radio 802.11a/g access point designed for business environments. Its default credentials are root / aerohive. The management interface provides advanced controls for radio settings, VLAN configuration, QoS policies, and HiveManager cloud integration.

Factory Reset Instructions for 192.168.2.10 Devices

If you have forgotten your admin password or need to restore your device to its factory state so that 192.168.2.10 becomes the active gateway again, follow the hardware reset procedure for your specific device:

SMC SMCWEBS-N — Factory Reset

1. Make sure the router is powered on and the power LED is stable.
2. Locate the Reset button on the back or underside of the unit. It is typically recessed inside a small pinhole to prevent accidental resets.
3. Insert a straightened paperclip, toothpick, or SIM ejector tool into the pinhole and press and hold the Reset button for approximately 15 seconds.
4. Hold until you see all the indicator LEDs flash simultaneously, then release.
5. The router will automatically reboot. Once it restarts, the gateway will be restored to 192.168.2.10 and the credentials will revert to admin / smcadmin.

SMC SMCWGBR14 — Factory Reset

1. Power on the router and wait for it to fully boot.
2. Find the Reset button on the rear panel.
3. Press and hold the Reset button for at least 10 seconds using a pin or paperclip.
4. Release when the LEDs flash. The device will reboot automatically and restore all settings to factory defaults, including the 192.168.2.10 gateway address.

Aerohive HiveAP-20-ag — Factory Reset

1. Ensure the access point is powered on (typically via PoE).
2. Locate the Reset pinhole on the device chassis.
3. Press and hold the Reset button for 5 seconds until the LED indicator changes color or flashes rapidly.
4. Release and allow the device to reboot. The management IP will return to 192.168.2.10 with credentials root / aerohive.

Important: A factory reset will erase all custom configurations, including your Wi-Fi name (SSID), password, port forwarding rules, and any other changes you have made. Only perform a reset if you are prepared to reconfigure the device from scratch.

Changing Your Password on a 192.168.2.10 Device

Keeping the default password on any router or access point is a serious security risk. If your device uses 192.168.2.10 as its gateway, you should change the admin password as soon as you complete the initial setup. Here is how to do it:

1. Open your browser and navigate to http://192.168.2.10.
2. Log in with your current credentials (or the defaults listed above if you have not changed them yet).
3. On SMC routers, navigate to the Administration tab and look for the Management or Password sub-section. Enter your new password in the provided fields — you will typically need to type it twice to confirm — then click Apply or Save.
4. On the Aerohive HiveAP-20-ag, go to Configuration > Admin > Admin Accounts and update the root account password from there.
5. After saving, you will be logged out and prompted to log back in with your new credentials. Store your new password somewhere safe.

You should also change your Wi-Fi password (WPA2/WPA3 key) from the Wireless section of the admin panel. Use a strong passphrase of at least 12 characters combining letters, numbers, and symbols. Avoid using your name, address, or any default values like smcadmin or aerohive.

Router Username and Password List

What Is 192.168.2.10 as a Private IP Address?

192.168.2.10 is a private Class C IPv4 address. It falls within the 192.168.0.0/16 block that the Internet Assigned Numbers Authority (IANA) has permanently reserved for private use, meaning it will never be routed on the public internet. Every device on your local network — your laptop, smartphone, smart TV, printer, and gaming console — communicates using private IP addresses like 192.168.2.10 internally, while your router uses a single public IP address to communicate with the outside world.

The 192.168.2.x subnet (with a subnet mask of 255.255.255.0) supports up to 254 usable host addresses, ranging from 192.168.2.1 to 192.168.2.254. When a router like the SMC SMCWEBS-N uses 192.168.2.10 as its gateway, it typically assigns client devices addresses from a DHCP pool elsewhere in the same subnet — for example, starting at 192.168.2.100 or 192.168.2.2. This means your laptop might receive 192.168.2.100, your phone 192.168.2.101, and so on, while the router itself holds 192.168.2.10.

On networks where the gateway is a different address (such as 192.168.2.1), the address 192.168.2.10 is often manually assigned as a static IP to a specific device that needs a permanent, predictable address — such as a network printer, a NAS (Network Attached Storage) device, a security camera, or a home server. Static assignment at 192.168.2.10 ensures that device is always reachable at the same address, regardless of DHCP lease renewals.

Because 192.168.2.10 is a private address, it is completely invisible to the public internet. No one outside your local network can directly connect to a device using this address, which provides a natural layer of security. However, this also means you cannot use 192.168.2.10 to host a publicly accessible website or service without additional configuration such as port forwarding or a VPN.

Related IP Addresses in the 192.168.2.x Subnet

The 192.168.2.x subnet contains several IP addresses that are commonly used for specific purposes in home and small-office networks. If you are managing a network in this range, here are the addresses you are most likely to encounter alongside 192.168.2.10:

• 192.168.2.1 — The most widely used default gateway in the 192.168.2.x subnet. Used by the majority of SMC routers, as well as Belkin, Edimax, and Siemens models. If your router is not an SMC SMCWEBS-N, SMCWGBR14, or SR10000, this is likely your actual gateway address.
• 192.168.2.2 — Sometimes used as an alternate gateway or as the first statically assigned client device on a network where 192.168.2.1 is the router.
• 192.168.2.10 — The current address. Used as the default gateway on select SMC and Aerohive hardware, and commonly assigned as a static IP to printers, NAS devices, or IP cameras on Belkin and other 192.168.2.x networks.
• 192.168.2.100 — Frequently the first DHCP-assigned address on Belkin networks, where the DHCP pool starts at .100. Also a popular static IP for the first managed device on the subnet.
• 192.168.2.254 — Used as the gateway address on some router configurations, particularly when the administrator wants to place the router at the top end of the address range rather than the bottom.

Understanding where 192.168.2.10 sits within this range helps you avoid IP address conflicts. If your router's gateway is 192.168.2.10 and your DHCP pool starts at 192.168.2.10 as well, any device that receives that address from DHCP will conflict with the router itself. Always ensure your DHCP pool starts at an address that does not overlap with your gateway — for example, starting the pool at 192.168.2.100 while keeping the gateway at 192.168.2.10 leaves plenty of room for static assignments in between.

Frequently Asked Questions About 192.168.2.10

What router uses 192.168.2.10 as its default gateway?

The routers and access points confirmed to use 192.168.2.10 as their factory-default gateway are the SMC SMCWEBS-N, SMC SMCWGBR14, SMC SR10000, and the Aerohive HiveAP-20-ag. If you own one of these devices and have not changed the default settings, you can access the admin panel by navigating to http://192.168.2.10 in your browser. Most other routers in the 192.168.2.x family — including the majority of SMC, Belkin, and Edimax models — use 192.168.2.1 as their gateway instead.

What is the default username and password for 192.168.2.10?

For SMC routers (SMCWEBS-N, SMCWGBR14, SR10000) that use 192.168.2.10, the default username is admin and the default password is smcadmin. For the Aerohive HiveAP-20-ag, the default username is root and the default password is aerohive. If these credentials do not work, the password has likely been changed by a previous administrator. In that case, you will need to perform a factory reset to restore the defaults.

Is 192.168.2.10 a public or private IP address?

192.168.2.10 is a private IP address. It belongs to the 192.168.0.0/16 private address block defined by RFC 1918 and is not routable on the public internet. This means it can only be used within your local network (LAN). Devices outside your home or office network cannot directly reach any device using 192.168.2.10 — your router's public IP address is what the internet sees.

Why does my device have the IP address 192.168.2.10?

Your device may have been assigned 192.168.2.10 in one of two ways. First, if your router is an SMC SMCWEBS-N, SMCWGBR14, or SR10000, then 192.168.2.10 is the router's own address — not a client device address. Second, if your network's gateway is a different address (such as 192.168.2.1), then 192.168.2.10 was either manually assigned to your device as a static IP, or it was leased to your device by the router's DHCP server. You can check which scenario applies by running ipconfig /all on Windows or ifconfig on macOS/Linux and comparing your device's IP with the listed Default Gateway.

Can two devices on the same network both use 192.168.2.10?

No. Only one device on a given network can use 192.168.2.10 at any time. If two devices are assigned the same IP address, an IP address conflict occurs, causing both devices to lose network connectivity or behave erratically. If your router's gateway is 192.168.2.10, make sure your DHCP pool does not include that address. If you are assigning 192.168.2.10 as a static IP to a client device, ensure no other device — including the router — is using it simultaneously.

How do I find out if 192.168.2.10 is my router's IP address?

The quickest way is to check your router's label — most manufacturers print the default gateway IP on a sticker on the bottom or back of the device. You can also check your connected device: on Windows, open Command Prompt and type ipconfig /all, then look for the Default Gateway value. On macOS, go to System Preferences > Network > your active connection > Advanced > TCP/IP. If the gateway shown is 192.168.2.10, then that is your router's address and you can access its admin panel at http://192.168.2.10.

What should I do if I forgot my 192.168.2.10 admin password?

If you have forgotten the admin password for your SMC or Aerohive device that uses 192.168.2.10, your only option is to perform a hardware factory reset. For SMC routers, press and hold the Reset button on the back of the unit for 10–15 seconds until the LEDs flash, then release. The router will reboot and restore the default credentials (admin / smcadmin for most SMC models). For the Aerohive HiveAP-20-ag, hold the Reset button for 5 seconds. After the reset, log in at http://192.168.2.10 with the factory defaults and immediately set a new, strong password to secure your network.