192.168.179.1 Admin Login

NEC routers and AVM FRITZ!Box devices are the primary brands associated with 192.168.179.1 as a default gateway address. NEC uses this IP on select router models as the primary LAN gateway, while AVM FRITZ!Box routers assign 192.168.179.1 as the default gateway for their guest Wi-Fi network — a separate, isolated subnet from the main home network (192.168.178.x). This makes 192.168.179.1 a notable address in both standalone router deployments and guest-network configurations. It belongs to the Class C private IPv4 address space defined by RFC 1918, covering the range 192.168.0.0 to 192.168.255.255. Only one device on any given network should be assigned 192.168.179.1 to avoid IP address conflicts. Other commonly used private gateway addresses include 192.168.1.254, 192.168.8.1, and 192.168.10.1.

How to Access 192.168.179.1

To reach the admin panel at 192.168.179.1, open any web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.179.1 directly into the address bar (not the search bar) and press Enter. You must be connected to the network that uses 192.168.179.1 as its gateway. If you are on an AVM FRITZ!Box, this means you need to be connected to the guest Wi-Fi network, not the main home network. If you are on an NEC router, connect to the router's primary Wi-Fi or via an Ethernet cable to any LAN port.

Once the login page loads, enter your username and password. For NEC routers, the most common default credentials are username: admin and password: 1234. For AVM FRITZ!Box devices, the admin password is unique to each unit and printed on the label on the back or bottom of the device. After logging in, you will have full access to your router's configuration interface, where you can manage Wi-Fi settings, connected devices, port forwarding, parental controls, firmware updates, and more.

It is worth noting that because 192.168.179.1 is a private IP address, it is only reachable from within the local network. You cannot access it from the internet or from a different network segment.

If You Can't Access 192.168.179.1

If typing http://192.168.179.1 into your browser returns an error or a blank page, there are several things you should check before assuming the address is wrong:

• Verify your connection: Make sure your device is connected to the correct network. If you are trying to access the FRITZ!Box guest network gateway, you must be connected to the guest Wi-Fi SSID — not the main home network. If you are on an NEC router, confirm you are connected to that router's network and not a different access point.
• Check your default gateway: On Windows, open Command Prompt (Start > type cmd > press Enter) and run ipconfig /all. Look for the Default Gateway field. On macOS, go to System Settings > Wi-Fi > Details > TCP/IP. If the gateway shown is not 192.168.179.1, then this IP is not your router's address. Check our guide to find your router IP address.
• Disable VPN or proxy: Active VPN connections or proxy settings can redirect your browser traffic and prevent access to local gateway addresses. Temporarily disable any VPN before trying again.
• Try a different browser or clear cache: Sometimes browser extensions or cached DNS entries interfere. Try an incognito/private window or a different browser entirely.
• Check firewall settings: Security software on your computer may block access to local network addresses. Temporarily disable your firewall to test, then re-enable it after.

If none of the above resolves the issue, the router's default gateway may have been changed from 192.168.179.1 to a different address. In that case, a factory reset is the most reliable way to restore the original settings.

Changing Your Router's Password at 192.168.179.1

Keeping the default admin password on your router is a significant security risk. Anyone connected to your network — including guests on a FRITZ!Box guest network — could potentially attempt to access the admin panel. Here is how to change your password after logging in to 192.168.179.1:

• NEC Routers: After logging in with your current credentials, navigate to the Administration or System section of the interface. Look for a Password or Admin Settings option. Enter your current password, then type your new password twice to confirm. Save the changes. Your new password should be at least 12 characters long and include a mix of uppercase letters, lowercase letters, numbers, and symbols.
• AVM FRITZ!Box (Guest Network): The FRITZ!Box admin panel is accessed via the main network gateway (192.168.178.1 or fritz.box), not through the guest network gateway at 192.168.179.1. To change the admin password, log in to the main FRITZ!Box interface, go to FRITZ!Box Settings > System > FRITZ!Box Users, and update the password there. To change the guest Wi-Fi password specifically, navigate to Wi-Fi > Guest Access and update the network key.

Always store your new password in a secure password manager. If you forget it, you will need to perform a factory reset to regain access.

Router Username and Password List

Factory Reset for Routers Using 192.168.179.1

If you have forgotten your admin credentials or the router is behaving unexpectedly, a factory reset will restore 192.168.179.1 as the default gateway and reset all settings to their out-of-box state. Be aware that a factory reset will erase all custom configurations, including your Wi-Fi name, Wi-Fi password, port forwarding rules, and any parental controls you have set up.

NEC Router Factory Reset

1. Make sure your NEC router is powered on.
2. Locate the Reset button on the back or bottom of the device. It is usually recessed inside a small pinhole to prevent accidental resets.
3. Use a straightened paper clip or a SIM ejector tool to press and hold the Reset button for at least 10 seconds.
4. Release the button when the router's indicator lights begin to flash or change behavior, signaling that the reset process has started.
5. Wait for the router to fully reboot — this typically takes 60 to 90 seconds.
6. Once rebooted, the gateway will be restored to 192.168.179.1 and the default login credentials (admin / 1234) will be active again.

AVM FRITZ!Box Factory Reset

1. Ensure your FRITZ!Box is powered on and connected.
2. Method 1 (via admin panel): Log in to the FRITZ!Box interface at fritz.box or 192.168.178.1. Go to FRITZ!Box Settings > System > Backup > Factory Settings tab. Click Load Factory Settings and confirm. The device will reboot and restore all defaults, including the guest network subnet at 192.168.179.x.
3. Method 2 (hardware reset): If you cannot access the admin panel, power off the FRITZ!Box for at least 60 seconds, then power it back on. Once the Power LED is solid, press and hold the Connect/WPS button for about 15 seconds until the Info LED flashes. The device will reset to factory defaults.
4. After the reset, reconnect to the FRITZ!Box using the default Wi-Fi credentials printed on the device label and reconfigure your settings.

What Is 192.168.179.1 and Why Does It Matter?

192.168.179.1 is a private IPv4 address that falls within the Class C private address block (192.168.0.0/16) reserved by the Internet Assigned Numbers Authority (IANA) under RFC 1918. This means it is not routable on the public internet — it exists exclusively within local area networks (LANs). Every device connected to a network that uses 192.168.179.1 as its gateway will receive a private IP address in the 192.168.179.x range (e.g., 192.168.179.2, 192.168.179.3, and so on, up to 192.168.179.254), assigned automatically via DHCP.

What makes 192.168.179.1 particularly interesting is its dual role. For NEC router users, it serves as the primary home or office network gateway — the address you type into a browser to manage all router settings. For AVM FRITZ!Box users, it is the gateway of the isolated guest Wi-Fi network. The FRITZ!Box deliberately places guest devices on the 192.168.179.x subnet to keep them separated from the main home network (192.168.178.x), preventing guests from accessing printers, NAS drives, smart home devices, or other equipment on the primary network.

Understanding which role 192.168.179.1 plays on your specific setup is important for troubleshooting. If you are a FRITZ!Box user and you see 192.168.179.1 as your gateway, it means your device is connected to the guest network — you will not be able to reach the main FRITZ!Box admin panel from this address. You would need to switch to the main network and navigate to 192.168.178.1 or fritz.box instead.

Related IP Addresses in the 192.168.179.x Subnet

The 192.168.179.0/24 subnet can accommodate up to 254 host addresses, ranging from 192.168.179.1 to 192.168.179.254. The address 192.168.179.1 is reserved as the gateway (router), while 192.168.179.255 is the broadcast address. All other addresses in the range are available for assignment to connected devices. Here are some commonly referenced addresses within this subnet and across the broader 192.168.x.x space:

• 192.168.179.2 – 192.168.179.254: Client device addresses assigned by DHCP to computers, smartphones, tablets, smart TVs, and other devices connected to the 192.168.179.x network.
• 192.168.178.1: The primary home network gateway on AVM FRITZ!Box routers — the companion address to 192.168.179.1 on the guest network.
• 192.168.1.254: A common alternative gateway used by some DSL modem-routers and ISP-provided equipment.
• 192.168.8.1: Default gateway used by Huawei routers and mobile Wi-Fi hotspot devices.
• 192.168.10.1: Used by certain Cisco, Motorola, and Comcast gateway devices.
• 192.168.100.1: Common default gateway for cable modems and some Huawei broadband devices.
• 192.168.2.1: Default gateway for some older Belkin and SMC router models.
• 10.0.0.1: A Class A private address used by Xfinity/Comcast gateways and Apple AirPort routers.

If you are unsure which IP address is your router's gateway, the quickest way to find out is to run ipconfig /all on Windows or check your network settings on macOS, iOS, or Android. The Default Gateway field will show you the exact address to type into your browser.

Frequently Asked Questions About 192.168.179.1

Which routers use 192.168.179.1 as their default gateway?

The two main associations with 192.168.179.1 are NEC routers, which use it as the primary LAN gateway on select models, and AVM FRITZ!Box routers, which assign it as the default gateway for the guest Wi-Fi network (192.168.179.x subnet). If you see 192.168.179.1 as your gateway and you own a FRITZ!Box, you are connected to the guest network. If you own an NEC router, it is your main admin access point.

What are the default login credentials for 192.168.179.1?

For NEC routers using 192.168.179.1, the most commonly reported default credentials are username: admin and password: 1234. For AVM FRITZ!Box devices, the admin password is unique to each unit and printed on the sticker on the back or bottom of the router — there is no universal default password. Always change default credentials after your first login to protect your network.

Can I access the FRITZ!Box admin panel through 192.168.179.1?

No. On an AVM FRITZ!Box, 192.168.179.1 is the gateway for the guest network, not the main admin interface. The FRITZ!Box admin panel is accessible via 192.168.178.1 or the domain fritz.box from the main home network. Devices connected to the guest network at 192.168.179.x are intentionally isolated and cannot reach the main admin panel — this is a deliberate security feature of the FRITZ!Box guest network design.

Is 192.168.179.1 safe to use on my network?

Yes, 192.168.179.1 is a standard private IP address and is completely safe to use as a gateway. It is not accessible from the internet. However, you should always secure your router admin panel with a strong, unique password, enable WPA3 or WPA2 encryption on your Wi-Fi, and keep your router firmware up to date to protect against known vulnerabilities.

What should I do if I forgot my password for 192.168.179.1?

If you have forgotten the admin password for your router at 192.168.179.1, your only option is to perform a factory reset. For NEC routers, press and hold the recessed Reset button on the device for at least 10 seconds while it is powered on. For AVM FRITZ!Box, you can initiate a factory reset via the admin panel (if accessible) or by using the hardware WPS/Connect button method. After the reset, the gateway will return to 192.168.179.1 and the default credentials will be restored.

How many devices can connect to the 192.168.179.x network?

The 192.168.179.0/24 subnet supports up to 254 connected devices (addresses 192.168.179.2 through 192.168.179.254). The .1 address is reserved for the gateway router, and .255 is the broadcast address. In practice, home routers using this subnet will typically limit DHCP leases to a smaller pool, but the theoretical maximum is 254 simultaneous devices.