192.168.100.14 Admin Login

192.168.100.14 is a Class C private IPv4 address belonging to the 192.168.100.0/24 subnet — a range closely associated with ISP-deployed cable modems, DOCSIS-based networking equipment, and modem-router combo units. While 192.168.100.14 is not itself a factory-default gateway address, it lives in the same subnet as 192.168.100.1, which is the well-known default management IP used by brands such as ARRIS, Motorola, Huawei, ZyXEL, Ubee, and Ambit Microsystems on their cable modem and modem-router combo devices. On networks operating within the 192.168.100.0/24 range, 192.168.100.14 is typically the fourteenth host address — most often assigned automatically by DHCP to a connected device such as a laptop, smartphone, smart TV, or desktop computer. ISPs including Comcast (Xfinity), AT&T U-verse, Spectrum, and regional broadband providers deliberately deploy hardware using the 192.168.100.x range to avoid IP conflicts with customer-owned routers, which typically default to the 192.168.1.x or 192.168.0.x ranges. Other commonly used default gateways include 192.168.1.254 and 192.168.8.1.

How to Access 192.168.100.14

To access the admin panel of a device using 192.168.100.14, open your preferred web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.100.14 directly into the address bar (not the search box) and press Enter. This will bring up the router or modem's login page, where you can enter your administrator credentials. Because 192.168.100.14 is a private IPv4 address within the 192.168.100.0/24 subnet, it is only reachable from within your local network — you cannot access it from the internet or from a device on a different subnet.

Before attempting to log in, make sure your device is connected to the same network — either via a Wi-Fi connection or through an Ethernet cable plugged into one of the router's LAN ports. If you are trying to reach the admin panel of your cable modem or gateway, the correct address is more likely 192.168.100.1 rather than 192.168.100.14. The address 192.168.100.14 is typically assigned to a client device on the network, not the gateway itself. To confirm your actual gateway address, open a Command Prompt on Windows and run ipconfig, or on macOS/Linux run netstat -nr and look for the Default Gateway field.

Router Brands Associated with the 192.168.100.x Subnet

The 192.168.100.0/24 subnet — which includes 192.168.100.14 — is most strongly associated with ISP-provisioned broadband hardware. If your device has been assigned 192.168.100.14, your network gateway is almost certainly one of the following brands:

• ARRIS — One of the most widely deployed cable modem brands in North America. Models such as the SB6183, SB8200, TG1682G, and SBG6580 commonly use 192.168.100.1 as their default gateway. ARRIS hardware is frequently provisioned by Comcast (Xfinity), Cox, and Spectrum.
• Motorola — Motorola cable modems and modem-router combos, including the MB7621, MG7700, and MG8702, are well-known for operating within the 192.168.100.x subnet. The default admin IP is 192.168.100.1, and the default credentials are typically admin / motorola or admin / password.
• Huawei — Huawei broadband gateways and ONT (Optical Network Terminal) devices, including the B593 and HG series, frequently use 192.168.100.1 as their default gateway. These are commonly deployed by AT&T U-verse and various international ISPs.
• ZyXEL — ZyXEL DSL modem-routers and cable gateways are known to operate within the 192.168.100.x range. ZyXEL devices are widely used by ISPs across Europe, Asia, and North America.
• Ubee — Ubee (formerly Ambit Microsystems) cable modems and gateways, such as the DVW3201B and DDW3611, use 192.168.100.1 as their default admin IP and are commonly provisioned by Time Warner Cable and Charter/Spectrum.
• Ambit Microsystems — The predecessor to Ubee, Ambit Microsystems devices including the U10C007 and T60C237 (Orion 3000) use 192.168.100.1 as their default gateway, placing all DHCP-assigned client devices in the 192.168.100.x range.

If your device has been assigned 192.168.100.14 via DHCP, your modem or gateway is almost certainly one of the brands listed above, with its admin panel accessible at 192.168.100.1.

If You Can't Access 192.168.100.14

If typing http://192.168.100.14 into your browser does not load a login page, there are several likely explanations. First, remember that 192.168.100.14 is typically a DHCP-assigned client address, not a gateway address — so it may not host an admin panel at all. Your router or modem's admin interface is most likely at 192.168.100.1. Try that address first.

If you are trying to confirm your actual gateway, open the Command Prompt on Windows (Start > cmd) and type ipconfig /all, then look for the Default Gateway value. On macOS, go to System Settings > Network > your connection > Details and check the Router field. On Android or iOS, tap the connected Wi-Fi network and look for the Router or Gateway field in the network details.

Other common reasons 192.168.100.14 may not respond include: your device is not connected to the correct network, a browser extension or VPN is intercepting the request, or your computer's IP configuration is set to a static address outside the 192.168.100.x range. To fix the last issue, set your network adapter to Obtain an IP address automatically via DHCP. You can also check our guide to find your router IP address for step-by-step instructions across all platforms.

Changing Your Router's Password on a 192.168.100.x Network

If your network operates within the 192.168.100.x subnet — meaning your device has been assigned an address like 192.168.100.14 — your router or modem's admin panel is accessible at 192.168.100.1. To change your admin password, navigate to that address in your browser and log in with your current credentials. For ARRIS modems, look for the Basic Setup or Admin tab. For Motorola gateways, navigate to Advanced > Administration. For Huawei devices, look under System Tools > Password. For ZyXEL routers, find the option under Maintenance > User Account.

It is strongly recommended that you change the default admin password immediately after setting up your device. Default credentials such as admin/admin, admin/password, or admin/motorola are publicly known and leave your network vulnerable. Choose a strong, unique password of at least 12 characters combining uppercase letters, lowercase letters, numbers, and symbols. Also consider changing your Wi-Fi SSID and password from the same admin panel to further secure your 192.168.100.x network.

Router Username and Password List

Factory Reset Procedures for Brands Using the 192.168.100.x Subnet

If you have forgotten your admin credentials for the gateway managing your 192.168.100.14 network, a factory reset will restore the device to its default settings — including the default username and password. Below are the reset procedures for the most common brands associated with this subnet:

• ARRIS — Locate the small Reset pinhole button on the back or bottom of your ARRIS modem or gateway. Using a straightened paperclip or pin, press and hold the button for 10–15 seconds until the lights flash or the device reboots. The gateway will return to factory defaults, and the admin panel will be accessible again at 192.168.100.1 with the default credentials printed on the device label.
• Motorola — On most Motorola cable modems and gateways, press and hold the Reset button on the rear panel for 10 seconds. The power LED will blink, indicating the reset is in progress. Once the device reboots, log in at 192.168.100.1 using admin as both the username and password, or admin / motorola depending on the model.
• Huawei — Hold the Reset button on the back of the Huawei gateway for 10–15 seconds until all indicator lights turn off and the device restarts. After rebooting, access the admin panel at 192.168.100.1. Default credentials are typically admin / admin or telecomadmin / admintelecom for ISP-provisioned units.
• ZyXEL — Press and hold the Reset button for 10 seconds until the Power LED begins to blink. Release the button and wait for the device to fully reboot. The admin panel will be available at 192.168.100.1 with default credentials of admin / 1234 or as printed on the device label.
• Ubee — Hold the Reset button on the rear of the Ubee gateway for 15 seconds. The device will reboot and restore factory settings. Log in at 192.168.100.1 using user / user for standard access or admin / admin for administrator access.

Important: A factory reset will erase all custom settings including your Wi-Fi name (SSID), Wi-Fi password, port forwarding rules, and any other configurations. Only perform a reset if you are prepared to reconfigure your device from scratch.

What Is 192.168.100.14 as a Private IP Address?

192.168.100.14 is a Class C private IPv4 address. The Internet Assigned Numbers Authority (IANA) has reserved the entire 192.168.0.0/16 block — which includes all addresses from 192.168.0.0 to 192.168.255.255 — exclusively for private network use. This means 192.168.100.14 can never be routed over the public internet and is only valid within a local area network (LAN).

Within the 192.168.100.0/24 subnet, there are 254 usable host addresses ranging from 192.168.100.1 to 192.168.100.254. The address 192.168.100.1 is reserved as the default gateway (your modem or router), and addresses like 192.168.100.14 are assigned to client devices — computers, smartphones, tablets, smart TVs, gaming consoles, and printers — via DHCP. The subnet mask for this range is 255.255.255.0.

The reason ISP-deployed hardware from brands like ARRIS, Motorola, Huawei, and ZyXEL uses the 192.168.100.x range rather than the more common 192.168.1.x or 192.168.0.x ranges is deliberate: it prevents IP address conflicts when customers connect their own routers behind the ISP's modem. If both devices used 192.168.1.1 as their gateway, the network would experience routing conflicts and connectivity failures. By using 192.168.100.x, the ISP's hardware and the customer's personal router can coexist on the same physical connection without collision.

If your device currently shows 192.168.100.14 as its IP address, it means your network's DHCP server — most likely an ARRIS, Motorola, Huawei, ZyXEL, or Ubee gateway — has automatically assigned this address to your device. You are the fourteenth host to connect to the network (or the DHCP pool started at .14). Your gateway address is 192.168.100.1, and that is the address you should use to access your modem or router's admin panel.

Related IP Addresses in the 192.168.100.x Subnet

The following IP addresses are commonly encountered within the same 192.168.100.0/24 subnet as 192.168.100.14. Understanding these addresses can help you navigate your network more effectively:

• 192.168.100.1 — The primary default gateway for the 192.168.100.0/24 subnet. This is the admin panel address for ARRIS, Motorola, Huawei, ZyXEL, Ubee, and Ambit Microsystems cable modems and gateways. If you want to access your modem's settings, this is the address to use.
• 192.168.100.2 – 192.168.100.13 — Host addresses within the same subnet, typically assigned by DHCP to other devices on your network before your device received 192.168.100.14.
• 192.168.100.15 – 192.168.100.254 — Additional host addresses available within the subnet for other connected devices.
• 192.168.100.255 — The broadcast address for the 192.168.100.0/24 subnet. This address is used to send data to all devices on the network simultaneously and cannot be assigned to any individual device.

Other commonly used private gateway addresses outside this subnet include 192.168.1.254, 192.168.8.1, 192.168.10.1, and 10.0.0.1. If your device is not receiving an address in the 192.168.100.x range, your router may be using one of these alternative subnets instead.

Frequently Asked Questions About 192.168.100.14

Is 192.168.100.14 a router's default gateway address?

No. 192.168.100.14 is a host address within the 192.168.100.0/24 subnet, not a default gateway. The default gateway for this subnet is 192.168.100.1, which is used by brands such as ARRIS, Motorola, Huawei, ZyXEL, and Ubee. If your device shows 192.168.100.14 as its IP address, it has been assigned this address by your modem or router's DHCP server.

Why does my device have the IP address 192.168.100.14?

Your device was automatically assigned 192.168.100.14 by the DHCP server running on your modem or router. This is normal behavior on networks using the 192.168.100.x subnet, which is common with ISP-deployed hardware from ARRIS, Motorola, Huawei, and ZyXEL. The address is temporary (leased) and may change the next time your device reconnects to the network.

How do I log in to my router if my IP is 192.168.100.14?

If your device has been assigned 192.168.100.14, your router or modem's admin panel is accessible at http://192.168.100.1. Open your browser, type that address into the address bar, and enter your admin credentials. Default credentials vary by brand: ARRIS uses admin / password, Motorola uses admin / motorola, Huawei uses admin / admin, and ZyXEL uses admin / 1234. Always check the label on your device for the exact defaults.

Can two devices on my network share the IP address 192.168.100.14?

No. Within any single subnet, each IP address must be unique. If two devices were assigned 192.168.100.14 simultaneously, an IP address conflict would occur, causing connectivity issues for both devices. Your DHCP server (the ARRIS, Motorola, Huawei, ZyXEL, or Ubee gateway) is designed to prevent this by tracking which addresses have already been leased.

What is the subnet mask for 192.168.100.14?

The standard subnet mask for the 192.168.100.0/24 network is 255.255.255.0. This means all devices with addresses from 192.168.100.1 to 192.168.100.254 are on the same local network and can communicate directly with each other without going through the gateway.

How do I set 192.168.100.14 as a static IP for my device?

To assign 192.168.100.14 as a permanent static IP to your device, you have two options. First, you can configure a DHCP reservation (also called a static lease) in your modem or router's admin panel at 192.168.100.1 — this tells the DHCP server to always assign 192.168.100.14 to a specific device based on its MAC address. Second, you can manually configure the IP on your device itself by setting the IP to 192.168.100.14, the subnet mask to 255.255.255.0, the gateway to 192.168.100.1, and the DNS servers to your preferred values (e.g., 8.8.8.8 and 8.8.4.4).