192.168.10.100 Admin Login

192.168.10.100 is a private Class C IPv4 address belonging to the 192.168.10.0/24 subnet — a range actively used by router brands such as Wavlink, Cudy, TRENDnet, Motorola, Zyxel, and Zoom, all of which use 192.168.10.1 as their default gateway address. On these networks, 192.168.10.100 is one of the most commonly assigned addresses — either handed out automatically by the router's DHCP server or configured manually as a static IP on a connected device such as a laptop, smartphone, smart TV, printer, or IP camera.

Unlike the gateway address itself (192.168.10.1), you typically won't access your router's admin panel by typing 192.168.10.100 into your browser — unless a specific device or network appliance has been deliberately configured to host a management interface at that address. Instead, 192.168.10.100 represents a host address within the network, sitting comfortably in the middle of the usable range of 192.168.10.1 through 192.168.10.254. Other commonly referenced private gateways include 192.168.1.254, 192.168.8.1, and 192.168.100.1.

How to Access 192.168.10.100

If a device on your network — such as a NAS drive, IP camera, managed switch, or access point — has been assigned or configured with the address 192.168.10.100, you can reach its web-based management interface by opening your browser and typing http://192.168.10.100 directly into the address bar. Press Enter and the device's login page should appear.

For this to work, your computer must be on the same subnet — meaning your own IP address should fall somewhere in the range of 192.168.10.1 to 192.168.10.254. If you're connected to a Wavlink, Cudy, TRENDnet, Motorola, Zyxel, or Zoom router that uses 192.168.10.1 as its gateway, your device will likely already be on the correct subnet and 192.168.10.100 will be reachable without any additional configuration.

If you're trying to reach your router's admin panel rather than a specific device at 192.168.10.100, you should instead navigate to http://192.168.10.1 — the actual default gateway used by Wavlink, Cudy, TRENDnet, Motorola, Zyxel, and Zoom routers. That is where you'll find the full router configuration interface, including Wi-Fi settings, DHCP management, firewall rules, and more.

Router Brands That Use the 192.168.10.x Subnet

The 192.168.10.0/24 subnet — and by extension the address 192.168.10.100 — is closely associated with several specific router manufacturers. Here's what you need to know about each brand and how 192.168.10.100 fits into their network setup:

• Wavlink — Wavlink is one of the most prominent brands using 192.168.10.1 as its factory-default gateway. All Wavlink wireless routers, range extenders, and mesh systems ship with this address pre-configured. When Wavlink's DHCP server is active, it assigns addresses starting from the 192.168.10.x pool, making 192.168.10.100 a very common dynamically assigned address on Wavlink networks. You can also access Wavlink's admin panel via the domain wifi.wavlink.com, which resolves to 192.168.10.1. Default credentials are admin / admin.
• Cudy — Cudy 4G/5G routers and Wi-Fi routers use 192.168.10.1 as their preset LAN IP address. Cudy's documentation explicitly states this as the default, and the brand's web portal cudy.net also resolves to this address. On a Cudy network, 192.168.10.100 is a typical DHCP-leased address for connected clients. Default credentials are admin / admin.
• TRENDnet — Several TRENDnet wireless router and access point models operate within the 192.168.10.x subnet, with 192.168.10.1 as the gateway. If you're on a TRENDnet network, 192.168.10.100 may be assigned to your computer or another connected device. Default credentials vary by model but are commonly admin / admin.
• Motorola — Motorola's home networking lineup includes models that use 192.168.10.1 as the default LAN IP. On these routers, the DHCP pool typically spans the 192.168.10.x range, meaning 192.168.10.100 is a standard client address. Default credentials are typically admin / motorola or admin / admin depending on the model.
• Zyxel — Zyxel produces a wide range of routers, modems, and access points, some of which are configured with 192.168.10.1 as the default gateway. On these Zyxel devices, 192.168.10.100 falls squarely within the expected DHCP range. Zyxel devices often use a randomly assigned default password printed on the device label.
• Zoom — Zoom (the networking brand, not the video conferencing app) lists 192.168.10.1 among its default gateway addresses for certain ADSL modem-router models. On these devices, 192.168.10.100 would be a client-assigned address within the active DHCP pool.

If You Can't Access 192.168.10.100

If typing http://192.168.10.100 into your browser returns an error or a blank page, there are a few likely causes to investigate:

• Wrong subnet: Your computer may be on a different subnet entirely. Open a command prompt (Windows: Start > Run > type cmd, then enter ipconfig) or a terminal on Mac/Linux (type ifconfig) and check your current IP address. If it shows something like 192.168.1.x or 192.168.0.x, you are not on the 192.168.10.x subnet and cannot reach 192.168.10.100 without changing your network settings or connecting directly to a Wavlink, Cudy, TRENDnet, Motorola, Zyxel, or Zoom router that uses this subnet.
• No device is assigned this address: 192.168.10.100 is a host address, not a guaranteed gateway. If no device on your network has been assigned or configured with this IP, the address will simply be unreachable. Check your router's DHCP client list (accessible via 192.168.10.1) to see which addresses are currently in use.
• DHCP lease has changed: If 192.168.10.100 was previously assigned to your device but the lease has expired or been reassigned, your device may now have a different IP. Reconnect to the network and run ipconfig again to confirm your current address.
• Browser or firewall issue: Make sure you are entering the address into the browser's address bar, not a search engine. Also temporarily disable any VPN, proxy, or firewall software that might be blocking local network access.

If you're trying to find your router's admin panel and not a specific device, check our guide to find your router IP address, or navigate directly to 192.168.10.1 if you're using a Wavlink, Cudy, TRENDnet, Motorola, Zyxel, or Zoom router.

Changing Your Router's Password on a 192.168.10.x Network

If your router uses the 192.168.10.0/24 subnet — as is the case with Wavlink, Cudy, TRENDnet, Motorola, Zyxel, and Zoom routers — you should make it a priority to change the default admin password as soon as possible. Leaving the default credentials in place (typically admin / admin) makes your network vulnerable to unauthorized access from any device connected to it.

To change your router's admin password, follow these steps:

1. Open your browser and navigate to http://192.168.10.1 — the default gateway for routers in this subnet.
2. Log in using your current credentials (default is usually admin for both username and password on Wavlink and Cudy devices).
3. Once inside the admin panel, look for a section labeled Administration, System, or Management.
4. Find the Change Password or Admin Password option and enter your new, strong password.
5. Save your changes. You will be prompted to log in again with the new password.

A strong password should be at least 12 characters long and include a mix of uppercase and lowercase letters, numbers, and symbols. Avoid using easily guessable information such as your address or birthday. Once you've secured your admin panel, also make sure your Wi-Fi password is equally strong — you can update it from the Wireless or Wi-Fi Settings section of the same admin interface.

Router Username and Password List

What Is 192.168.10.100 as a Private IP Address?

192.168.10.100 is a private Class C IPv4 address. It belongs to the 192.168.0.0/16 block reserved by IANA (Internet Assigned Numbers Authority) exclusively for use within private local area networks. This means 192.168.10.100 is not routable on the public internet — it exists only within your home or office network and is invisible to the outside world.

Within the 192.168.10.0/24 subnet, there are 254 usable host addresses: from 192.168.10.1 (typically the router gateway on Wavlink, Cudy, TRENDnet, Motorola, Zyxel, and Zoom networks) all the way to 192.168.10.254. The address 192.168.10.100 sits right in the middle of this range, making it one of the most frequently assigned addresses by DHCP servers operating on this subnet.

Here's how a typical 192.168.10.x network might look with devices connected to a Wavlink or Cudy router:

• The router holds the address 192.168.10.1 (the default gateway).
• Your laptop might receive 192.168.10.100 as its DHCP-assigned address.
• Your smartphone might receive 192.168.10.101.
• Your smart TV might receive 192.168.10.102.
• A printer or IP camera might be assigned a static address such as 192.168.10.150.

Every device on the network uses its private IP to communicate with the router, which in turn handles all traffic to and from the public internet using its WAN (public) IP address. The private addresses like 192.168.10.100 never leave your local network — they are translated to the router's public IP via a process called NAT (Network Address Translation).

It's worth noting that 192.168.10.100 can also be manually assigned as a static IP address to a specific device — such as a network printer, NAS drive, or IP camera — so that it always has the same address on the network, regardless of DHCP lease renewals. This is useful when you need to consistently reach a device at a known address, for example when setting up port forwarding rules on your Wavlink, Cudy, or TRENDnet router.

Factory Reset Procedures for Routers on the 192.168.10.x Subnet

If you've forgotten your admin credentials or your router is behaving unexpectedly, performing a factory reset will restore all settings — including the default gateway of 192.168.10.1 and the default DHCP pool that includes 192.168.10.100 — back to their out-of-the-box state. Here's how to reset the most common brands associated with this subnet:

• Wavlink: Locate the Reset button on the back or bottom of your Wavlink router. With the router powered on, use a pin or paperclip to press and hold the Reset button for 10 seconds until the LED indicators flash or change color. Release the button and wait for the router to reboot. Once complete, the gateway will return to 192.168.10.1 and credentials will reset to admin / admin. You can also access the admin panel via wifi.wavlink.com.
• Cudy: On Cudy routers, press and hold the Reset button (usually on the rear panel) for 8–10 seconds while the device is powered on. The LEDs will blink to confirm the reset. After rebooting, the LAN IP returns to 192.168.10.1 and the login credentials reset to admin / admin. You can also access the panel via cudy.net.
• TRENDnet: TRENDnet routers typically have a recessed Reset button on the back panel. Hold it for 15 seconds with the router powered on. The device will reboot and restore factory defaults, including the 192.168.10.x subnet configuration. Default credentials are usually admin / admin.
• Motorola: Motorola home routers generally require holding the Reset button for 10 seconds. After the reset, the router returns to its factory subnet settings. Check the label on the bottom of your Motorola device for the exact default credentials, as they vary by model.
• Zyxel: Zyxel devices use a similar reset process — hold the Reset button for 10 seconds until the Power LED blinks. Zyxel devices often use a unique, randomly generated default password printed on the device label rather than a universal default, so check the sticker on your device after resetting.

Important: A factory reset will erase all custom settings including your Wi-Fi name (SSID), Wi-Fi password, port forwarding rules, and any static IP assignments. Make sure to back up your configuration before resetting if your router supports it.

Related IP Addresses in the 192.168.10.x Subnet

The 192.168.10.0/24 subnet contains 254 usable host addresses. Beyond 192.168.10.100, several other addresses in this range are commonly referenced in networking contexts — either as default gateways, management interfaces, or frequently assigned DHCP addresses. Here are some of the most notable ones you may encounter on Wavlink, Cudy, TRENDnet, Motorola, Zyxel, or Zoom networks:

• 192.168.10.1 — The primary default gateway for all brands in this subnet. This is the address you type into your browser to access your router's admin panel on Wavlink, Cudy, TRENDnet, Motorola, Zyxel, and Zoom devices.
• 192.168.10.2 — Often the first address assigned by DHCP after the gateway. May also be used as a secondary DNS server or a static address for a primary network device.
• 192.168.10.10 — Used as the factory-default IP by the Cisco AP541N Small Business access point and the TRENDnet TS-S402 NAS device. A notable address in small-business environments.
• 192.168.10.50 — A common static IP assignment for network printers and managed switches on 192.168.10.x networks.
• 192.168.10.100 — The current address. Frequently the first or an early DHCP-assigned address on Wavlink and Cudy networks, and a popular choice for static assignment to primary client devices.
• 192.168.10.101 – 192.168.10.150 — The typical DHCP pool range on many routers using this subnet, covering most dynamically assigned client devices.
• 192.168.10.254 — The last usable host address in the subnet, sometimes used as an alternative gateway address or reserved for specific network appliances.

Other commonly used private gateway addresses outside this subnet that you may want to explore include 192.168.1.254, 192.168.8.1, 192.168.100.1, and 10.0.0.1.

Frequently Asked Questions About 192.168.10.100

Is 192.168.10.100 a router's default gateway?

Not typically. On networks using Wavlink, Cudy, TRENDnet, Motorola, Zyxel, or Zoom routers, the default gateway is 192.168.10.1. The address 192.168.10.100 is most commonly a DHCP-assigned client address — meaning it's given to a device like your laptop, phone, or smart TV when it connects to the router. However, 192.168.10.100 can be configured as a management address for specific network appliances such as IP cameras, NAS drives, or access points.

How do I find out if my device has been assigned 192.168.10.100?

On Windows, open the Command Prompt and type ipconfig. Look for the IPv4 Address field under your active network adapter. On Mac or Linux, open Terminal and type ifconfig or ip addr. If the result shows 192.168.10.100, that is your current IP address on the network. You can also log into your router at 192.168.10.1 and check the DHCP client list to see all assigned addresses.

Which router brands assign 192.168.10.100 to connected devices?

Any router that uses the 192.168.10.0/24 subnet and has DHCP enabled can assign 192.168.10.100 to a connected device. The brands most commonly associated with this subnet are Wavlink, Cudy, TRENDnet, Motorola, Zyxel, and Zoom — all of which use 192.168.10.1 as their default gateway. On these networks, 192.168.10.100 is one of the first addresses in the DHCP pool.

Can I set 192.168.10.100 as a static IP for my device?

Yes. You can assign 192.168.10.100 as a static (fixed) IP address to any device on your network. This is useful for devices you need to reach consistently, such as a printer, NAS, or IP camera. You can do this either through your device's network settings (setting a manual IP of 192.168.10.100 with a subnet mask of 255.255.255.0 and a gateway of 192.168.10.1) or through your router's DHCP reservation feature, accessible at 192.168.10.1 on Wavlink, Cudy, TRENDnet, Motorola, Zyxel, or Zoom routers.

What should I do if there's an IP conflict at 192.168.10.100?

An IP address conflict occurs when two devices on the same network are assigned the same IP — in this case, 192.168.10.100. This can happen if one device has a static IP of 192.168.10.100 and the DHCP server assigns the same address to another device. To resolve it, log into your router at 192.168.10.1, go to the DHCP settings, and either exclude 192.168.10.100 from the DHCP pool or create a DHCP reservation that ties the address to a specific device's MAC address. Then reboot the conflicting devices.

Is 192.168.10.100 safe to use on my network?

Yes. Like all addresses in the 192.168.x.x range, 192.168.10.100 is a private IP address that is not accessible from the public internet. It is completely safe to use within your local network. The security of your network depends not on the IP address itself, but on the strength of your Wi-Fi password and router admin credentials — both of which you should change from their defaults on your Wavlink, Cudy, TRENDnet, Motorola, Zyxel, or Zoom router.