192.168.1.80 Admin Login

192.168.1.80 is a private IPv4 address that sits within the widely used 192.168.1.0/24 subnet — one of the most common local network ranges in homes and small offices worldwide. While it is not the primary default gateway of a traditional Wi-Fi router, it is notably used as the default static IP address by the Allen & Heath Avantis series of professional digital mixing consoles, and it is also the fallback IP address adopted by TP-Link Kasa smart home devices (such as smart plugs and switches) when they temporarily lose their DHCP-assigned address. Beyond these specific use cases, 192.168.1.80 is frequently assigned by routers as a DHCP lease to client devices — laptops, smartphones, printers, smart TVs, and IoT gadgets — on any network whose gateway is 192.168.1.1 or 192.168.1.254. Because it belongs to the Class C private address space defined by RFC 1918, 192.168.1.80 is never routed over the public internet and is safe to use freely within your local network.

How to Access 192.168.1.80

To reach the administration interface of any device using 192.168.1.80, open your preferred web browser — Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari — and type http://192.168.1.80 directly into the address bar. Do not type it into a search engine, as that will return search results rather than your device's login page. Press Enter and you should be greeted with a login prompt.

For this to work, your computer or phone must be connected to the same local network as the device at 192.168.1.80 — either via Wi-Fi or a wired Ethernet cable. If you are trying to reach an Allen & Heath Avantis mixing console, connect your laptop directly to one of the console's two RJ45 Gigabit Ethernet ports, or connect both devices to the same network switch or wireless router. Make sure your computer's IP address is in the same subnet — for example, 192.168.1.100 — with a subnet mask of 255.255.255.0 and a gateway of 192.168.1.254.

Once the login page loads, enter the username and password for your device. If you have never changed these credentials, check the label on the bottom or back of your device, or consult the manufacturer's documentation for the factory defaults.

If You Cannot Access 192.168.1.80

If typing http://192.168.1.80 into your browser produces an error such as "This site can't be reached" or the page simply times out, work through the following checks before assuming the device is faulty:

• Confirm your network connection: Make sure your computer is connected to the same network as the device at 192.168.1.80. If you are on a different subnet (for example, 192.168.0.x), you will not be able to reach it.
• Check your own IP address: Open a command prompt (Windows: press Win + R, type cmd, press Enter, then type ipconfig) or a terminal (Mac/Linux: type ifconfig or ip a). Your IP address should start with 192.168.1. If it does not, adjust your network adapter settings or reconnect to the correct network.
• Ping the device: In the command prompt, type ping 192.168.1.80 and press Enter. If you receive replies, the device is reachable and the issue may be browser-related. Try a different browser or clear your cache.
• Disable VPN or proxy: Active VPN connections or proxy settings can redirect your traffic away from the local network, making 192.168.1.80 unreachable. Temporarily disable them and try again.
• Check for IP conflicts: If another device on your network has been manually assigned 192.168.1.80, you may experience intermittent connectivity. Log into your router's admin panel (typically at 192.168.1.1) and review the connected device list to identify any conflicts.
• Use the correct gateway: 192.168.1.80 is not a standard router gateway. If you are trying to reach your router's admin panel, your actual gateway is more likely 192.168.1.1 or 192.168.1.254. Run ipconfig /all (Windows) or check your network settings to confirm your default gateway.

Allen & Heath Avantis — Default IP 192.168.1.80

The most prominent device that ships with 192.168.1.80 as its factory default IP address is the Allen & Heath Avantis series of professional 64-channel, 96kHz digital mixing consoles. This includes the standard Avantis and the Avantis Solo. According to the official Allen & Heath Getting Started Guide, the Avantis ships with the following default network configuration out of the box:

• DHCP Enabled: Off (static IP by default)
• IP Address: 192.168.1.80
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.254

This static address allows audio engineers to reliably connect a laptop running Avantis Editor or an iOS device running the Allen & Heath control app to the console over a wired or wireless network, without needing a DHCP server. To communicate with the Avantis at 192.168.1.80, your laptop or tablet must be configured with a compatible IP address in the same subnet — for example, 192.168.1.100 — with a subnet mask of 255.255.255.0.

If you need to change the Avantis's IP address, navigate to the Setup screen on the console's touchscreen, then select Network. From there you can toggle DHCP on or off and manually enter a new static IP. Always ensure that no two devices on your audio network share the same IP address, as this will cause communication failures between the console and any connected I/O expanders, personal monitoring systems, or control devices.

TP-Link Kasa Smart Devices and 192.168.1.80

If you use TP-Link Kasa smart plugs, smart switches, or other Kasa smart home devices on a network whose DHCP range includes 192.168.1.80, you may notice that these devices temporarily adopt this address as a fallback IP when they lose their DHCP lease or fail to connect to the Wi-Fi network. This is a known behavior reported by Kasa users and confirmed in community forums: when a Kasa device cannot obtain an IP from the router, it briefly broadcasts from 192.168.1.80, which can trigger IP conflict warnings on your network controller — particularly if you use a Ubiquiti UniFi system.

If you see a conflict warning involving 192.168.1.80 and you have Kasa devices on your network, the fix is straightforward:

• Ensure your router's DHCP range does not include 192.168.1.80, or reserve that address exclusively for your Kasa device via a DHCP reservation tied to the device's MAC address.
• Alternatively, assign your Kasa devices a static IP outside the DHCP pool to prevent address conflicts entirely.
• If a Kasa device is stuck at 192.168.1.80 and won't reconnect, perform a factory reset by holding the device's reset button for 5–10 seconds until the LED flashes, then re-add it through the Kasa app.

Changing Your Device's Password at 192.168.1.80

Whether you are accessing a router, a mixing console, or any other networked device at 192.168.1.80, you should always change the default password as soon as possible. Default credentials are publicly documented and represent a significant security risk on any network. To update your password:

1. Log in to the device's web interface at http://192.168.1.80 using the current username and password.
2. Navigate to the Administration, Security, or User Management section — the exact label depends on your device's firmware.
3. Enter your current password, then type and confirm your new password. Choose something at least 12 characters long, mixing uppercase letters, lowercase letters, numbers, and symbols.
4. Save your changes. You will likely be prompted to log in again with the new credentials.

For Allen & Heath Avantis consoles, user profile management and access control are handled through the Setup > User Profiles section on the touchscreen. You can create multiple user profiles with different permission levels to control who can make changes to the system.

Router Username and Password List

What Is 192.168.1.80 as a Private IP Address?

192.168.1.80 is a Class C private IPv4 address that falls within the 192.168.0.0–192.168.255.255 range reserved for private use by RFC 1918. This means it can only be used within a local area network (LAN) and is never visible or routable on the public internet. Your Internet Service Provider (ISP) and external websites will never see 192.168.1.80 — they only see your router's public IP address, which your ISP assigns.

Within the 192.168.1.0/24 subnet, there are 254 usable host addresses: from 192.168.1.1 to 192.168.1.254. The address 192.168.1.0 is the network identifier and 192.168.1.255 is the broadcast address — neither can be assigned to a device. The address 192.168.1.80 sits comfortably in the middle of this range, making it a popular choice for DHCP assignment or manual static configuration for devices like printers, NAS drives, IP cameras, smart home hubs, and professional audio equipment.

When your router's DHCP server is active, it automatically hands out addresses from a configured pool — for example, 192.168.1.100 to 192.168.1.200. If 192.168.1.80 falls outside that pool, it is available for you to assign manually as a static IP to any device you want to reach reliably at a fixed address. This is especially useful for devices you access frequently, such as a NAS, a network printer, or — as in the case of the Allen & Heath Avantis — a professional audio console.

Related IP Addresses in the 192.168.1.x Subnet

The 192.168.1.0/24 subnet that contains 192.168.1.80 is home to several other commonly used IP addresses. Understanding how these relate to each other helps you manage your network more effectively and avoid conflicts:

• 192.168.1.1 — The most common default gateway for routers from TP-Link, ASUS, Linksys, Belkin, and many others. This is the address you type into your browser to access your router's admin panel.
• 192.168.1.254 — Used as the default gateway by some routers (including certain BT Home Hub and SpeedTouch models) and also the recommended gateway address in Allen & Heath's Avantis network setup guide.
• 192.168.1.2 – 192.168.1.79 — Addresses in the lower portion of the subnet, often used for DHCP leases or statically assigned to trusted devices like desktop computers, NAS drives, and printers.
• 192.168.1.81 – 192.168.1.99 — Addresses adjacent to 192.168.1.80, suitable for other static devices on the same network segment.
• 192.168.1.100 – 192.168.1.200 — A typical DHCP pool range used by many routers, including those recommended by Allen & Heath for use with their consoles.
• 192.168.1.255 — The broadcast address for the 192.168.1.0/24 subnet. This address cannot be assigned to any device.

Other commonly used private gateway addresses outside the 192.168.1.x range include 192.168.0.1, 10.0.0.1, 192.168.100.1, 192.168.8.1, and 192.168.10.1.

Frequently Asked Questions About 192.168.1.80

Is 192.168.1.80 a router's default gateway?

Not typically. Unlike 192.168.1.1 or 192.168.1.254, the address 192.168.1.80 is not a standard default gateway for consumer Wi-Fi routers. However, it is the factory default IP address of the Allen & Heath Avantis professional digital mixing console, and it is the fallback address used by TP-Link Kasa smart devices when DHCP fails. On most home networks, 192.168.1.80 is simply a DHCP-assigned address given to one of your connected client devices.

Why is my network showing a conflict at 192.168.1.80?

An IP conflict at 192.168.1.80 means two devices on your network are trying to use the same address simultaneously. This is commonly caused by TP-Link Kasa smart plugs or switches reverting to 192.168.1.80 as a fallback when they lose their DHCP lease, while another device already holds that address. To resolve this, log into your router's admin panel at 192.168.1.1 or 192.168.1.254, identify which devices are using 192.168.1.80, and either assign a DHCP reservation for one of them or adjust your DHCP pool to exclude this address.

How do I reset the Allen & Heath Avantis to its default IP of 192.168.1.80?

If you have changed the Avantis's IP address and need to restore it to the factory default of 192.168.1.80, navigate to Setup > Network on the console's touchscreen and manually re-enter the default values: IP Address 192.168.1.80, Subnet Mask 255.255.255.0, Gateway 192.168.1.254, DHCP Enabled: Off. Alternatively, performing a full factory reset on the console will restore all settings — including the network configuration — to their factory defaults. Consult the Allen & Heath Avantis Getting Started Guide for the specific reset procedure for your firmware version.

Can I assign 192.168.1.80 to my printer or NAS?

Yes. As long as no other device on your network is already using 192.168.1.80, you can freely assign it as a static IP to any device — a printer, NAS, IP camera, smart hub, or any other networked equipment. Assigning a static IP like 192.168.1.80 to devices you access frequently ensures they are always reachable at the same address, regardless of DHCP lease renewals. Just make sure 192.168.1.80 is either outside your router's DHCP pool or reserved via a DHCP reservation tied to the device's MAC address.

What subnet mask should I use with 192.168.1.80?

The standard subnet mask for the 192.168.1.0/24 network is 255.255.255.0. This is the mask used by the Allen & Heath Avantis by default and is the correct choice for any device you assign to 192.168.1.80 on a typical home or small office network. With this mask, all devices in the 192.168.1.1–192.168.1.254 range can communicate directly with each other without needing to go through the router.