192.168.1.173 Admin Login

192.168.1.173 is a private Class C IPv4 address belonging to the 192.168.1.0/24 subnet. Unlike fixed gateway addresses such as 192.168.1.1 or 192.168.1.254, this address is not tied to a single router brand as a factory default gateway. Instead, 192.168.1.173 functions as a general-purpose private IP — most commonly assigned dynamically by a DHCP server to a client device (laptop, smartphone, smart TV, printer, or IoT gadget) connected to a home or office network whose gateway sits in the 192.168.1.x range. It can also be configured as a static IP for a specific device, such as a network printer, IP camera, or access point, to ensure it always receives the same address. Because it falls well within the upper half of the 192.168.1.x pool (addresses .100–.254 are the typical DHCP range on most consumer routers), you are very likely to see 192.168.1.173 appear on networks managed by routers from brands including Linksys, TP-Link, Netgear, ASUS, D-Link, Cisco, and Tenda — all of which default to the 192.168.1.x subnet.

How to Access 192.168.1.173

To reach the admin interface or web UI of a device assigned the address 192.168.1.173, open any modern browser and type http://192.168.1.173 directly into the address bar — do not use a search engine, as that will return search results rather than your device's login page. Press Enter and you should be presented with a login prompt. This works for any device that hosts a web-based management interface at this address, such as a managed switch, wireless access point, IP camera, or NAS device that has been assigned 192.168.1.173 either statically or via a DHCP reservation.

If you are trying to reach your router's admin panel and you land on 192.168.1.173 instead of the expected gateway address, it is possible that your router's LAN IP has been manually changed from its default (usually 192.168.1.1) to 192.168.1.173. In that case, entering http://192.168.1.173 will load your router's dashboard. Use the credentials printed on your router's label, or the manufacturer's defaults if you have never changed them.

If You Can't Access 192.168.1.173

If typing http://192.168.1.173 into your browser returns a "This site can't be reached" error or simply times out, there are several likely explanations:

• Your device is not on the 192.168.1.x subnet. Your computer must be on the same subnet as 192.168.1.173 to communicate with it. Open a command prompt (Windows: Start > cmd, then type ipconfig /all; macOS/Linux: open Terminal and type ifconfig or ip a) and check your current IP address and default gateway. If your gateway is something like 192.168.0.1 or 10.0.0.1, then 192.168.1.173 is on a different subnet and will not be reachable without routing.
• No device is currently assigned 192.168.1.173. DHCP leases expire and devices disconnect. If the device that held this address has left the network, the address is simply unoccupied and nothing will respond to it.
• A firewall is blocking access. Some devices block HTTP access to their management interface from certain hosts. Check the device's firewall or access-control settings.
• The address has been changed. If you previously configured a device to use 192.168.1.173 but later changed it, you will need to find the new address. Use your router's DHCP client list (accessible via 192.168.1.1 or 192.168.1.254) to see all currently assigned addresses on your network.

You can also run a quick ping test from the command line: type ping 192.168.1.173. If you receive replies, the device is online and reachable at the network layer — the issue is likely application-level (e.g., no web server running). If the ping times out, the device is either offline or on a different subnet.

Assigning 192.168.1.173 as a Static IP

One of the most practical uses of 192.168.1.173 is as a manually assigned static IP address for a device that needs a permanent, predictable address on your network. Common candidates include network printers, IP cameras, smart home hubs, NAS drives, and Raspberry Pi servers. There are two ways to do this:

Method 1 — DHCP Reservation (Recommended)

Log in to your router's admin panel (typically at 192.168.1.1 or 192.168.1.254) and navigate to the DHCP or LAN settings section. Look for an option labelled Address Reservation, Static DHCP, or DHCP Binding. Enter the MAC address of the target device and assign it the IP 192.168.1.173. From that point on, every time that device connects to your network, it will always receive 192.168.1.173 — without you needing to configure anything on the device itself. This method is supported by virtually all consumer routers from Linksys, TP-Link, Netgear, ASUS, D-Link, and Tenda.

Method 2 — Manual Static IP on the Device

Alternatively, configure the device itself to use 192.168.1.173 as its static IP. On Windows, go to Control Panel > Network and Sharing Center > Change adapter settings, right-click your network adapter, select Properties, then Internet Protocol Version 4 (TCP/IPv4), and enter the following:

• IP address: 192.168.1.173
• Subnet mask: 255.255.255.0
• Default gateway: 192.168.1.1 (or your router's actual gateway)
• Preferred DNS server: 192.168.1.1 (or a public DNS such as 8.8.8.8)

Before doing this, make sure 192.168.1.173 is excluded from your router's DHCP pool to prevent address conflicts. Most routers allow you to set the DHCP range to, for example, 192.168.1.100–192.168.1.172, leaving 192.168.1.173 and above free for static assignment.

Changing Your Router's Password

Whether your network gateway is at 192.168.1.1 or has been moved to 192.168.1.173, keeping your router secured with a strong, unique password is essential. The factory-default credentials printed on your router's label are publicly known and represent a significant security risk if left unchanged. To update your password, log in to your router's admin panel and look for a section labelled Administration, System, or Management. You will find a Change Password or Admin Password field. Choose a password that is at least 12 characters long and combines uppercase letters, lowercase letters, numbers, and symbols. You will be asked to enter it twice to confirm. After saving, you will be logged out and must re-enter the new credentials. Store them somewhere safe — if you forget the admin password, the only recovery option is a factory reset, which will erase all your custom settings.

Router Username and Password List

What is 192.168.1.173 and Why Does It Matter?

192.168.1.173 is a private IPv4 address in the Class C range defined by RFC 1918. The entire 192.168.0.0/16 block — which includes every address from 192.168.0.0 to 192.168.255.255 — is reserved exclusively for use within private networks and is never routed on the public internet. This means that 192.168.1.173 is completely invisible to the outside world; only devices on your local network can see or communicate with it.

Within the 192.168.1.0/24 subnet, there are 254 usable host addresses (192.168.1.1 through 192.168.1.254). The address 192.168.1.0 is the network identifier and 192.168.1.255 is the broadcast address — neither can be assigned to a device. Your router typically occupies one of the low-numbered addresses (most commonly 192.168.1.1), and the remaining addresses are distributed to connected devices either dynamically via DHCP or through static assignment. 192.168.1.173 sits in the upper portion of this range, making it a natural candidate for static device assignments or the tail end of a DHCP pool.

The subnet mask associated with this address in a standard home network is 255.255.255.0 (also written as /24 in CIDR notation). This mask tells every device on the network that any address beginning with 192.168.1 is local — no routing required — while anything outside that range must be forwarded to the default gateway.

Because 192.168.1.173 is a private address, it can be reused across millions of home and office networks worldwide without conflict. Your neighbour's network may also have a device at 192.168.1.173, but since both networks are isolated behind their respective routers using NAT (Network Address Translation), there is no collision. NAT is what allows a single public IP address (assigned by your ISP) to serve all the private devices on your network simultaneously.

192.168.1.173 in the Context of the 192.168.1.x Subnet

To fully understand where 192.168.1.173 fits, it helps to see how the 192.168.1.0/24 subnet is typically structured on a consumer network:

• 192.168.1.1 — Default gateway (router). The most common LAN IP for routers from Linksys, TP-Link, Netgear, ASUS, D-Link, Cisco, and Tenda. See 192.168.1.1.
• 192.168.1.2–192.168.1.99 — Often reserved for static assignments: servers, managed switches, access points, printers, and IP cameras.
• 192.168.1.100–192.168.1.199 — Typical DHCP pool range. Devices that connect to the network automatically receive an address in this range, including 192.168.1.173.
• 192.168.1.200–192.168.1.253 — Upper DHCP range or additional static reservation space.
• 192.168.1.254 — Alternative default gateway used by some routers (e.g., certain Linksys, Alcatel, and Thomson models). See 192.168.1.254.

192.168.1.173 therefore most commonly appears as a DHCP-assigned address for the 73rd device to connect to a network whose pool starts at 192.168.1.100, or as a deliberately chosen static address for a mid-range device. Other related IPs in the same subnet that are commonly referenced include 192.168.1.1 (the standard gateway) and 192.168.1.254 (the alternative high-end gateway). Outside the 192.168.1.x subnet, you may also encounter 192.168.0.1, 192.168.2.1, 192.168.8.1, 192.168.10.1, 192.168.100.1, and 10.0.0.1 as default gateways on other network configurations.

Frequently Asked Questions About 192.168.1.173

Is 192.168.1.173 a router's default gateway?

No. 192.168.1.173 is not a known factory-default gateway for any major router brand. It is a general-purpose private IP address in the 192.168.1.0/24 subnet. The standard default gateways in this subnet are 192.168.1.1 (used by Linksys, TP-Link, Netgear, ASUS, D-Link, Cisco, and Tenda, among others) and 192.168.1.254 (used by some Linksys, Alcatel, and Thomson models). If your device shows 192.168.1.173 as its gateway, it means someone has manually reconfigured the router's LAN IP to this address.

Why has my device been assigned 192.168.1.173?

Your router's DHCP server automatically assigned 192.168.1.173 to your device from its available address pool. This is completely normal. The specific address you receive depends on the order in which devices connect and the DHCP lease history. If you need your device to always use 192.168.1.173, set up a DHCP reservation in your router's admin panel (accessible at 192.168.1.1 or 192.168.1.254) by binding 192.168.1.173 to your device's MAC address.

Can two devices on my network share the IP 192.168.1.173?

No. Within any single network, each IP address must be unique. If two devices are both assigned 192.168.1.173 — whether through a DHCP misconfiguration or conflicting static assignments — you will experience an IP address conflict. Both devices will lose connectivity or behave erratically. Your operating system will typically display a warning such as "Another device on this network has the same IP address." To resolve it, release and renew the DHCP lease on one device, or change one device's static IP to a different address in the 192.168.1.x range.

Is 192.168.1.173 safe to use on my network?

Yes. As a private RFC 1918 address, 192.168.1.173 is completely safe and is never exposed to the public internet. It is only reachable by other devices on your local network. However, if a device at 192.168.1.173 hosts a web-based admin interface (such as an IP camera or NAS), you should ensure it is protected with a strong, unique password to prevent unauthorised access from other devices on the same network.

How do I find out which device on my network is using 192.168.1.173?

Log in to your router's admin panel at 192.168.1.1 or 192.168.1.254 and navigate to the DHCP Client List, Connected Devices, or ARP Table section. This will show you every device currently assigned an IP address on your network, including which device holds 192.168.1.173, along with its hostname and MAC address. Alternatively, you can run arp -a from the Windows command prompt or macOS/Linux terminal to see the ARP cache, which maps IP addresses to MAC addresses for recently active devices.

What is the subnet mask for 192.168.1.173?

On a standard home or small-office network, 192.168.1.173 uses a subnet mask of 255.255.255.0 (CIDR: /24). This places it in the 192.168.1.0/24 network, alongside all other addresses from 192.168.1.1 to 192.168.1.254. The network address is 192.168.1.0 and the broadcast address is 192.168.1.255. In some enterprise or segmented network configurations, a narrower subnet mask such as 255.255.255.128 (/25) or 255.255.255.192 (/26) may be used, which would change which addresses are considered local peers of 192.168.1.173.