192.168.1.164 Admin Login
192.168.1.164 is a private Class C IPv4 address belonging to the 192.168.1.0/24 subnet. Unlike fixed gateway addresses such as 192.168.1.1 or 192.168.1.254, this address is not tied to a single router brand as a factory default gateway. Instead, it functions as a general-purpose private IP — most commonly assigned by a DHCP server to a connected device (laptop, smartphone, smart TV, printer, or IoT gadget) on a home or office network, or manually configured as a static IP for a specific device. The gateway for your network is most likely 192.168.1.1, which is the default admin address used by routers from brands such as Linksys, ASUS, TP-Link, and Cisco. If you are seeing 192.168.1.164 as your device's current IP, it simply means your router's DHCP server has leased this address to your device within the available pool.
192.168.1.164 IP Address
192.168.1.164
in the address bar of your web browser or click on the button below.
How to Access 192.168.1.164
To attempt to access a device or admin interface at 192.168.1.164, open your web browser and type http://192.168.1.164 into the address bar and press Enter. If a device on your network — such as a network-attached storage (NAS) unit, IP camera, managed switch, or access point — has been assigned or configured with this address, its web-based management interface will load. If nothing loads, it simply means no device on your current network is actively using 192.168.1.164 as its IP address at this time.
Keep in mind that 192.168.1.164 is a host address, not a router gateway. If you are trying to reach your router's admin panel, you should instead navigate to your router's default gateway IP. For most home routers, that will be 192.168.1.1. You can confirm your actual gateway by opening a command prompt on Windows and typing ipconfig, or on macOS/Linux by typing ip route or netstat -nr. Look for the line labeled Default Gateway.
If You Can't Access 192.168.1.164
If typing http://192.168.1.164 into your browser returns an error or a blank page, there are a few likely explanations. First, verify that a device is actually assigned this IP on your network. Because 192.168.1.164 falls within the upper range of a typical DHCP pool (commonly 192.168.1.100–192.168.1.254), it may be dynamically assigned to different devices at different times. Second, check whether the device you expect to find at this address is powered on and connected to the same network. Third, confirm you are on the correct subnet — your own device must also be in the 192.168.1.x range for communication to work.
If you are trying to reach your router's settings page and mistakenly typed 192.168.1.164, try 192.168.1.1 instead, as that is the most common default gateway for the 192.168.1.x subnet. Alternatively, use our guide to find your router IP address to confirm the correct address for your specific setup.
Assigning 192.168.1.164 as a Static IP
One of the most practical uses of 192.168.1.164 is assigning it as a static (fixed) IP address to a specific device on your network. This is especially useful for devices you need to reach consistently, such as a home server, NAS drive, IP camera, smart home hub, or network printer. When a device has a static IP, it always uses the same address regardless of reboots or DHCP lease renewals — making it far easier to manage and connect to.
There are two ways to assign 192.168.1.164 as a static IP. The first method is to configure it directly on the device itself through its network settings. On Windows, go to Control Panel > Network and Sharing Center > Change Adapter Settings, right-click your connection, select Properties, then configure IPv4 with the address 192.168.1.164, subnet mask 255.255.255.0, and your gateway (typically 192.168.1.1). On macOS, go to System Settings > Network, select your interface, and manually enter the same values.
The second method — and the more reliable one — is to use your router's DHCP reservation feature. Log in to your router's admin panel (usually at 192.168.1.1), navigate to the DHCP or LAN settings, and bind the MAC address of your target device to the IP 192.168.1.164. This way, the router will always assign that exact address to that device automatically, without any manual configuration on the device itself.
Before assigning 192.168.1.164 statically, make sure it is outside your router's active DHCP range or that it is explicitly reserved, to avoid IP address conflicts with other devices on the network.
192.168.1.164 and the 192.168.1.0/24 Subnet
The address 192.168.1.164 belongs to the 192.168.1.0/24 subnet, one of the most widely used private network ranges in the world. This subnet supports up to 254 usable host addresses, ranging from 192.168.1.1 to 192.168.1.254, with 192.168.1.0 reserved as the network address and 192.168.1.255 as the broadcast address. The subnet mask for this range is 255.255.255.0.
Within this subnet, 192.168.1.164 sits in the upper-middle portion of the address space. Routers from brands like Linksys, ASUS, TP-Link, Cisco, and Belkin commonly use 192.168.1.1 as their default gateway and assign DHCP leases across the rest of the range — meaning 192.168.1.164 is a perfectly normal address for any connected device to receive. Other addresses in this subnet that are commonly referenced include 192.168.1.1 (the most common default gateway), 192.168.1.254 (used by some ISP-provided routers and modems), and addresses like 192.168.1.2 through 192.168.1.10, which are often reserved for static assignment to critical infrastructure devices.
Because 192.168.1.164 is a Class C private address, it is non-routable on the public internet. It can only be used within your local area network (LAN). This is by design — RFC 1918 reserves the entire 192.168.0.0/16 block for private use, ensuring these addresses never conflict with public internet traffic.
Changing Your Router's Password
Even though 192.168.1.164 is a device-level IP rather than a router gateway, the security of your entire network depends on a strong router admin password. If your gateway is at 192.168.1.1, log in there and navigate to the Administration or System tab to update your password. Choose a password that is at least 12 characters long and combines uppercase letters, lowercase letters, numbers, and symbols. Avoid using default passwords like admin/admin or admin/password, as these are the first combinations attackers try. A strong router password protects every device on your 192.168.1.x network — including the device currently using 192.168.1.164.
Router Username and Password List
| Brand | Model | Protocol | Username | Password |
|---|---|---|---|---|
| 2WIRE | HOMEPORTAL Rev. SBC YAHOO! DSL | (none) | 2Wire | (none) |
| 2WIRE | ALL WIFI ROUTERS | HTTP | (none) | Wireless |
What Is 192.168.1.164 Used For?
192.168.1.164 is a private IPv4 address in the Class C range, and it serves several practical purposes depending on how your network is configured. Here are the most common scenarios in which you might encounter this address:
- DHCP-assigned device IP: Your router's DHCP server automatically assigns 192.168.1.164 to a device — such as a laptop, phone, tablet, or smart home device — when it connects to your Wi-Fi or wired network. This is the most common scenario.
- Static IP for a server or NAS: Network administrators and home lab enthusiasts often assign 192.168.1.164 as a fixed static IP to a local server, NAS device, or Raspberry Pi so it can always be reached at the same address.
- IP camera or IoT device: Security cameras, smart speakers, and other IoT devices are frequently assigned addresses in the 192.168.1.100–192.168.1.200 range, making 192.168.1.164 a likely candidate for such a device.
- Access point or managed switch: In larger home or small office networks, secondary access points and managed switches are often given static IPs like 192.168.1.164 so administrators can access their management interfaces at any time.
No matter how 192.168.1.164 is being used on your network, it operates entirely within your local environment. It is invisible to the outside internet and poses no direct external security risk on its own. However, any device using this address should still be secured with strong credentials and up-to-date firmware.
Frequently Asked Questions About 192.168.1.164
Is 192.168.1.164 a valid IP address?
Yes, 192.168.1.164 is a fully valid private IPv4 address. It falls within the Class C private address range defined by RFC 1918 (192.168.0.0 – 192.168.255.255) and can be used freely on any local network. It is not routable on the public internet, which means it is exclusively used within your home or office LAN.
Which router brands use 192.168.1.164 as their default gateway?
No major router manufacturer uses 192.168.1.164 as a factory-set default gateway. This address is a general-purpose private IP, most commonly seen as a DHCP-assigned address on networks where the actual router gateway is 192.168.1.1. Brands like Linksys, ASUS, TP-Link, Cisco, and Belkin all use 192.168.1.1 as their default gateway on the same subnet. If you need to access your router's admin panel, use 192.168.1.1 instead.
Why does my device show 192.168.1.164 as its IP address?
Your router's DHCP server has automatically assigned 192.168.1.164 to your device from its available address pool. This is completely normal behavior. Each time a device connects to your network, the DHCP server picks an available address from its configured range and leases it to that device. If you want your device to always use 192.168.1.164, you can either set a static IP on the device itself or create a DHCP reservation in your router's admin panel (accessible at 192.168.1.1).
Can two devices on my network share 192.168.1.164?
No. Just like every other IP address, 192.168.1.164 can only be assigned to one device at a time on a given network. If two devices are configured with the same IP, an IP address conflict will occur, causing both devices to lose network connectivity or behave erratically. Your router's DHCP server is designed to prevent this automatically, but conflicts can still arise if you manually assign 192.168.1.164 as a static IP to a device while the DHCP server is also handing it out to another device. Always ensure static assignments are either outside the DHCP pool range or properly reserved.
How do I find out what device is using 192.168.1.164?
Log in to your router's admin panel at 192.168.1.1 and navigate to the DHCP Client List, Connected Devices, or LAN section. This will show you a table of all devices currently connected to your network along with their assigned IP addresses and MAC addresses. Find the entry for 192.168.1.164 to identify the device name and hardware address. Alternatively, you can use a network scanning tool such as Advanced IP Scanner (Windows) or Angry IP Scanner (cross-platform) to scan your 192.168.1.x subnet and identify all active hosts.
What is the difference between 192.168.1.164 and 192.168.1.1?
192.168.1.1 is the default gateway — the router's own IP address on the local network, used to route traffic between your LAN and the internet. It also hosts the router's web-based admin interface. 192.168.1.164, on the other hand, is a host address assigned to a client device (computer, phone, printer, etc.) on the same network. Both addresses exist within the same 192.168.1.0/24 subnet and can communicate with each other directly, but they serve very different roles.
What are some related IP addresses in the same subnet?
The 192.168.1.0/24 subnet contains 254 usable addresses. Some of the most commonly referenced ones include 192.168.1.1 (the standard default gateway for most home routers), 192.168.1.254 (used by some ISP-provided modems and routers as their default gateway), and addresses in the 192.168.1.2–192.168.1.10 range, which are often statically assigned to critical devices. Other gateways on different subnets that you may encounter include 192.168.0.1, 192.168.2.1, 10.0.0.1, 192.168.100.1, and 192.168.8.1.