192.168.1.117 Admin Login

192.168.1.117 is a private IPv4 address belonging to the Class C range of the 192.168.1.0/24 subnet. Unlike fixed gateway addresses such as 192.168.1.1 or 192.168.1.254, this address is not typically used as a router's default gateway. Instead, 192.168.1.117 is most commonly assigned to a client device on your local network — either automatically by your router's DHCP server or manually configured as a static IP. You might find this address assigned to a laptop, smartphone, smart TV, IP camera, printer, or any other device connected to a home or small office network whose gateway router operates on the 192.168.1.x subnet. Common router brands that manage the 192.168.1.x subnet — and therefore may assign 192.168.1.117 to a connected device — include TP-Link, Netgear, ASUS, Linksys, D-Link, Cisco, and Tenda, all of which use 192.168.1.1 as their default gateway on this subnet.

How to Access 192.168.1.117

If a device on your network has been assigned the IP address 192.168.1.117, you may be able to access its web-based interface by typing http://192.168.1.117 directly into your browser's address bar. This is particularly useful if 192.168.1.117 has been statically assigned to a network-attached device such as an IP camera, a NAS (Network Attached Storage) drive, a managed switch, a VoIP adapter, or a wireless access point. These types of devices often host their own admin panels accessible via their assigned IP address. If you are trying to reach your router's admin panel, however, you should instead navigate to your router's default gateway — most likely 192.168.1.1 — rather than 192.168.1.117. To confirm which IP address is your router's gateway, open a command prompt on Windows (Start > Run > cmd) and type ipconfig, then look for the Default Gateway field. On macOS or Linux, use the ip route or netstat -nr command in the terminal.

If You Can't Access 192.168.1.117

If entering http://192.168.1.117 into your browser returns an error or a blank page, there are several possible explanations. First, the device that was previously assigned 192.168.1.117 may have disconnected from the network or received a new IP address from the DHCP server. Because DHCP leases are temporary, your router may have reassigned 192.168.1.117 to a different device or released it entirely. Second, if you manually configured a device with the static IP 192.168.1.117, verify that the device is powered on and connected to the same network. Third, make sure you are connected to the correct Wi-Fi network or LAN — accessing a private IP like 192.168.1.117 is only possible from within the same local network. If you are trying to reach your router's login page and 192.168.1.117 is not working, use our guide to find your router IP address and confirm the correct gateway. You can also check our default router IP address list to identify the correct admin panel address for your specific router brand.

Assigning 192.168.1.117 as a Static IP

One of the most practical uses of 192.168.1.117 is as a static (fixed) IP address for a specific device on your network. By default, most routers assign IP addresses dynamically via DHCP, meaning a device like your printer or IP camera might receive a different IP address each time it reconnects. This can cause problems — for example, your print queue may stop working if your printer's IP changes. Assigning 192.168.1.117 as a static IP ensures that a specific device always uses the same address, making it easier to manage and access. You can do this in two ways:

• On the device itself: Go into the device's network settings and manually set the IP address to 192.168.1.117, the subnet mask to 255.255.255.0, and the default gateway to your router's IP (typically 192.168.1.1).
• Via DHCP reservation on your router: Log in to your router's admin panel (usually at 192.168.1.1), navigate to the DHCP settings, and create a reservation that ties the device's MAC address to the IP 192.168.1.117. This way, the router always assigns 192.168.1.117 to that specific device automatically.

Before assigning 192.168.1.117 as a static IP, make sure it is outside your router's DHCP pool range to avoid IP address conflicts. For example, if your router's DHCP pool runs from 192.168.1.100 to 192.168.1.200, then 192.168.1.117 falls within that range and could be assigned to another device simultaneously — causing a conflict. In that case, either adjust the DHCP pool or choose an IP outside the range, such as 192.168.1.50.

Understanding IP Address Conflicts on 192.168.1.117

An IP address conflict occurs when two devices on the same network are assigned the same IP address — in this case, 192.168.1.117. When this happens, both devices will experience network disruptions: one or both may lose internet access, and communication between devices on the network may become unreliable. This is a common issue in networks where both DHCP and static IP assignments are used without proper coordination. If you suspect an IP conflict involving 192.168.1.117, here is how to resolve it:

• On Windows: Open the Command Prompt and type arp -a to view the ARP table. If you see 192.168.1.117 listed with two different MAC addresses, a conflict exists.
• Release and renew: On the conflicting device, open Command Prompt and run ipconfig /release followed by ipconfig /renew to request a new IP from the DHCP server.
• Check your router's DHCP client list: Log in to your router admin panel at 192.168.1.1 and review the list of connected devices. Identify which devices are using 192.168.1.117 and reassign one of them to a different address.
• Adjust DHCP pool: If you have a static device using 192.168.1.117, exclude that address from the DHCP pool in your router's settings to prevent future conflicts.

Changing Your Router's Password

Even though 192.168.1.117 is not your router's admin IP, the security of your entire 192.168.1.x network — including every device that might be assigned an address like 192.168.1.117 — depends on having a strong router password. If your router is still using its factory default credentials, anyone connected to your network can access the admin panel and change settings, redirect traffic, or lock you out entirely. To change your router's admin password, log in to your router's interface (most likely at 192.168.1.1) using your current credentials. Navigate to the Administration, System, or Security section — the exact label depends on your router brand. Look for the option to change the admin password and enter a new, strong password of at least 12 characters, combining uppercase and lowercase letters, numbers, and symbols. You should also change your Wi-Fi password (WPA2 or WPA3 key) from the Wireless settings section to prevent unauthorized devices from joining your network and receiving addresses like 192.168.1.117.

Router Username and Password List

What Is 192.168.1.117 and Why Does It Matter?

192.168.1.117 is a private Class C IPv4 address in the 192.168.1.0/24 subnet. According to RFC 1918, the 192.168.0.0/16 block — which includes 192.168.1.117 — is reserved exclusively for private network use and is never routed on the public internet. This means 192.168.1.117 can only be reached from within your local network, making it inherently safe from direct external access.

Within the 192.168.1.0/24 subnet, up to 254 usable host addresses are available (192.168.1.1 through 192.168.1.254), and 192.168.1.117 is one of them. The subnet mask for this network is 255.255.255.0, meaning all devices sharing the first three octets (192.168.1) are on the same local network and can communicate directly with each other without going through the internet.

Here is how 192.168.1.117 fits into the broader network structure:

• Network address: 192.168.1.0
• Subnet mask: 255.255.255.0 (/24)
• Usable host range: 192.168.1.1 – 192.168.1.254
• Broadcast address: 192.168.1.255
• Default gateway (typical): 192.168.1.1

Because 192.168.1.117 sits in the middle of the DHCP pool range used by most consumer routers, it is most commonly seen as a dynamically assigned address given to a laptop, smartphone, tablet, or smart home device. However, it can also be configured as a static IP for devices that need a consistent, predictable address on the network.

Related IP Addresses in the 192.168.1.x Subnet

The 192.168.1.0/24 subnet contains many IP addresses that serve specific roles in home and office networks. If you are managing a network where 192.168.1.117 is in use, you should also be familiar with these commonly used addresses:

• 192.168.1.1 — The most common default gateway for routers from TP-Link, Netgear, ASUS, Linksys, D-Link, Cisco, and Tenda. This is where you access your router's admin panel.
• 192.168.1.254 — Used as the default gateway by some routers from 2Wire, Aztech, and certain DSL modem-routers. Also a common static IP for secondary network devices.
• 192.168.1.2 – 192.168.1.99 — Often reserved for static IP assignments to infrastructure devices such as switches, access points, printers, and IP cameras.
• 192.168.1.100 – 192.168.1.200 — The typical DHCP pool range on most consumer routers, where addresses like 192.168.1.117 are dynamically assigned to client devices.
• 192.168.1.201 – 192.168.1.254 — Often left outside the DHCP pool and used for additional static assignments or reserved for future infrastructure.

Other related private IP addresses you may encounter across different subnets include 192.168.0.1, 192.168.2.1, 10.0.0.1, 192.168.100.1, 192.168.8.1, and 192.168.10.1 — all of which are used as default gateways by various router manufacturers.

Frequently Asked Questions About 192.168.1.117

Is 192.168.1.117 a router's default gateway?

No. 192.168.1.117 is not a standard default gateway address for any major router brand. It is a general-purpose private IP address within the 192.168.1.0/24 subnet, most commonly assigned by a DHCP server to a client device such as a laptop, phone, or smart home gadget. The typical default gateway on this subnet is 192.168.1.1, used by brands like TP-Link, Netgear, ASUS, Linksys, and D-Link.

Can I use 192.168.1.117 as a static IP for my device?

Yes, you can assign 192.168.1.117 as a static IP to any device on your 192.168.1.x network. Just make sure the address is not already in use by another device and that it does not conflict with your router's DHCP pool. You can either set it manually on the device or create a DHCP reservation in your router's admin panel at 192.168.1.1.

Why does my device show 192.168.1.117 as its IP address?

Your router's DHCP server automatically assigned 192.168.1.117 to your device when it connected to the network. This is normal behavior. The address is temporary (leased) and may change the next time your device reconnects, unless you configure a static assignment or DHCP reservation.

How do I find out which device is using 192.168.1.117?

Log in to your router's admin panel — most likely at 192.168.1.1 — and navigate to the DHCP client list or connected devices section. This will show you all devices currently assigned an IP address on your network, including which device holds 192.168.1.117. You can also run arp -a from a Windows Command Prompt to see the ARP table and identify the MAC address associated with 192.168.1.117.

Is 192.168.1.117 accessible from the internet?

No. 192.168.1.117 is a private IP address defined under RFC 1918 and is not routable on the public internet. It can only be accessed from within the same local network (192.168.1.0/24). This makes it inherently protected from direct external attacks, though your network's overall security still depends on your router's firewall and password strength.

What should I do if there is an IP conflict on 192.168.1.117?

If two devices on your network are both assigned 192.168.1.117, you will experience connectivity issues. To resolve this, log in to your router at 192.168.1.1 and check the DHCP client list. Identify the conflicting devices and either reassign one to a different IP or exclude 192.168.1.117 from the DHCP pool if it is being used as a static address. On Windows, you can also run ipconfig /release and ipconfig /renew to force the device to request a new IP from the DHCP server.