192.168.1.114 Admin Login

192.168.1.114 is a private Class C IPv4 address that belongs to the widely used 192.168.1.0/24 subnet. Unlike fixed gateway addresses such as 192.168.1.1 or 192.168.1.254, the address 192.168.1.114 is not typically hardcoded as a default gateway by any single router manufacturer. Instead, it functions as a dynamically assigned or statically configured host address within a local network — commonly allocated by the DHCP server of routers from brands such as TP-Link, ASUS, Netgear, D-Link, Linksys, Tenda, and Huawei, all of which operate within the 192.168.1.x address pool by default. You may see your computer, smartphone, smart TV, IP camera, NAS drive, or printer assigned 192.168.1.114 when connecting to one of these routers. It is also frequently configured as a static IP address for network devices that require a permanent, predictable address on the local network.

How to Access 192.168.1.114

To access a device or router admin panel at 192.168.1.114, open your preferred web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.1.114 directly into the address bar, then press Enter. Do not type it into a search engine, as that will return search results rather than your device's login page. If a router or network device has been configured to use 192.168.1.114 as its management IP, you will be presented with a login prompt asking for a username and password. The most common default credentials are admin / admin, admin / password, or a blank password field — always check the label on the back or bottom of your device for the exact defaults. Keep in mind that to reach 192.168.1.114, your own device must be connected to the same local network, either via Wi-Fi or an Ethernet cable. If you are on a different subnet, the address will not be reachable.

If You Can't Access 192.168.1.114

If entering http://192.168.1.114 into your browser returns an error or a blank page, there are several possible causes to investigate. First, confirm that your device is connected to the correct local network — a different Wi-Fi network or a VPN connection can prevent you from reaching 192.168.1.114 entirely. Second, verify that 192.168.1.114 is actually the address of the device you are trying to reach. Open a command prompt on Windows (Start > cmd) and run ipconfig /all, or on Mac/Linux open Terminal and run ifconfig or ip a. Look at your Default Gateway and your own assigned IP address — if your IP is in the 192.168.1.x range, then 192.168.1.114 is reachable on your network. Third, if you are trying to reach a specific device at 192.168.1.114, make sure that device is powered on and connected. You can also try running ping 192.168.1.114 in the command prompt to check if the address responds. If none of these steps help, consult our guide on how to find your router IP address, or check whether your gateway is a more common address like 192.168.1.1 or 192.168.0.1.

Router Brands That Use the 192.168.1.x Subnet (Including 192.168.1.114)

While 192.168.1.114 is not the default gateway IP of any single specific router brand, it falls squarely within the 192.168.1.x DHCP pool used by many of the world's most popular router manufacturers. Here is a breakdown of the major brands whose routers will commonly assign 192.168.1.114 to a connected device:

• TP-Link — Most TP-Link home routers use 192.168.1.1 as the gateway and assign DHCP addresses in the range 192.168.1.100–192.168.1.199, meaning 192.168.1.114 is a very common DHCP-assigned address on TP-Link networks. Access the admin panel at tplinkrouter.net or via 192.168.1.1.
• ASUS — ASUS routers default to the 192.168.1.x subnet with a gateway of 192.168.1.1. Devices connected to an ASUS router are frequently assigned addresses like 192.168.1.114 through DHCP. ASUS also supports DHCP reservation, letting you permanently bind 192.168.1.114 to a specific device's MAC address.
• Netgear — Many Netgear Nighthawk and Orbi models use the 192.168.1.x range. The default gateway is typically 192.168.1.1, and DHCP leases are handed out starting from 192.168.1.2 or 192.168.1.100, making 192.168.1.114 a likely assigned address for the 14th or 15th connected device.
• D-Link — D-Link routers commonly operate on the 192.168.1.x subnet. Their default gateway is often 192.168.1.1, and connected devices receive addresses in the 192.168.1.100–192.168.1.200 range, which includes 192.168.1.114.
• Linksys — Linksys routers have long used 192.168.1.1 as their default gateway. The DHCP pool typically spans 192.168.1.100 to 192.168.1.149 or higher, so 192.168.1.114 is a standard DHCP address on Linksys networks.
• Tenda — Tenda routers use the 192.168.1.x subnet with a default gateway of 192.168.1.1. DHCP leases are distributed across the 192.168.1.100–192.168.1.200 range, and 192.168.1.114 is a typical assigned address.
• Huawei — Huawei home routers and HiLink devices often use the 192.168.1.x subnet, with 192.168.1.1 or 192.168.3.1 as the gateway. Devices on Huawei networks may receive 192.168.1.114 as a DHCP lease.

In all of these cases, 192.168.1.114 is a host address — not the router itself — unless you have manually reconfigured a device to use it as a static management IP.

Router Username and Password List

Changing Your Router's Password When Connected via 192.168.1.114

If your device has been assigned 192.168.1.114 by your router's DHCP server, you can still access your router's admin panel to change the Wi-Fi password or admin credentials — you just need to navigate to your router's gateway address instead. To find your gateway, run ipconfig /all on Windows or netstat -nr on Mac/Linux and look for the Default Gateway field. It will most likely be 192.168.1.1 if you are on a TP-Link, ASUS, Netgear, D-Link, or Linksys network. Once you access the admin panel, navigate to the Wireless or Wi-Fi Settings section to change your network password, and look under Administration or System to change the router's login credentials. Always choose a strong, unique password — avoid using the default credentials, as they are publicly known and represent a significant security risk. After saving your new password, you will be prompted to log in again with the updated credentials.

Using 192.168.1.114 as a Static IP Address

One of the most practical uses of 192.168.1.114 is as a manually assigned static IP address for a specific device on your local network. Unlike DHCP-assigned addresses that can change each time a device reconnects, a static IP like 192.168.1.114 stays permanently bound to a device. This is especially useful for:

• Network printers — Assigning your printer a static IP of 192.168.1.114 ensures that all computers on the network can always find it at the same address, preventing print job failures caused by IP changes.
• IP cameras and security systems — Surveillance cameras need a fixed address so your NVR or viewing software always knows where to connect. Setting 192.168.1.114 as a static IP for a camera ensures uninterrupted monitoring.
• NAS (Network Attached Storage) drives — A NAS device at 192.168.1.114 can always be mapped as a network drive on your computers without reconfiguration after reboots.
• Smart home hubs — Devices like Home Assistant, Raspberry Pi servers, or smart home controllers benefit from a fixed address like 192.168.1.114 so that other devices and apps can reliably communicate with them.
• Gaming consoles — Assigning a static IP to your PlayStation or Xbox at 192.168.1.114 and then setting up port forwarding rules in your router ensures a more stable online gaming experience.

To assign 192.168.1.114 as a static IP, you can either configure it directly on the device itself (through its network settings) or use your router's DHCP reservation feature, which binds the IP to the device's MAC address so the router always hands out 192.168.1.114 to that specific device.

What Is a Private IP Address Like 192.168.1.114?

192.168.1.114 is a private Class C IPv4 address. The Internet Assigned Numbers Authority (IANA) has reserved the entire 192.168.0.0 – 192.168.255.255 range exclusively for private network use, meaning this address will never appear on the public internet and cannot be routed beyond your local network. The Class C designation means the network portion of the address covers the first three octets (192.168.1), while the final octet (.114) identifies the specific host within that network. The subnet 192.168.1.0/24 supports up to 254 usable host addresses (192.168.1.1 through 192.168.1.254), and 192.168.1.114 is one of those hosts.

Because private IPs like 192.168.1.114 are reused across millions of home and office networks worldwide, there is no conflict — your 192.168.1.114 is completely isolated from someone else's 192.168.1.114 on a different network. Your router uses Network Address Translation (NAT) to map all private addresses on your network to a single public IP address when communicating with the internet, keeping your internal addressing private and secure.

Factory Reset Procedures for Common Routers on the 192.168.1.x Network

If you have lost access to your router's admin panel and can no longer reach the gateway from your device at 192.168.1.114, a factory reset may be necessary. Here are the reset procedures for the most common router brands that operate on the 192.168.1.x subnet:

• TP-Link — With the router powered on, locate the Reset button on the back or bottom of the device. Use a pin or paperclip to press and hold it for 10 seconds until the LED lights flash. The router will reboot and restore all settings to factory defaults, including the gateway address reverting to 192.168.1.1.
• ASUS — Press and hold the Reset button on the rear of the router for 5–10 seconds until the power LED begins to flash slowly. Release the button and wait for the router to fully reboot. Alternatively, you can perform a reset through the ASUS admin panel under Administration > Restore/Save/Upload Setting.
• Netgear — Press and hold the Restore Factory Settings button (usually recessed on the bottom) for 7 seconds using a pin. The Power LED will blink amber and then turn green when the reset is complete. The default gateway will return to 192.168.1.1.
• D-Link — Hold the Reset button on the back of the router for 10 seconds. The status LEDs will flash, and the router will reboot with factory settings. The default gateway reverts to 192.168.1.1 and default credentials return to admin / (blank password).
• Linksys — Press and hold the Reset button for 10 seconds until the LED flashes. For Linksys Velop mesh systems, hold the reset button on the bottom of the node for 10 seconds until the LED turns red. The gateway will revert to 192.168.1.1.
• Tenda — Press and hold the Reset button for 8–10 seconds until all LEDs flash simultaneously. The router will reboot and restore factory settings with the gateway at 192.168.1.1 and credentials of admin / admin.

Important: A factory reset will erase all custom settings including your Wi-Fi name (SSID), Wi-Fi password, port forwarding rules, and any static IP assignments — including any configuration you had for 192.168.1.114. Make sure to back up your router configuration before performing a reset if possible.

Related IP Addresses in the 192.168.1.x Subnet

The address 192.168.1.114 is part of the broader 192.168.1.0/24 subnet, which contains 254 usable host addresses. Several other addresses in this subnet are commonly used as default gateways or reserved addresses. Here are the most notable ones you should be aware of:

• 192.168.1.1 — The most widely used default gateway address in the world, used by TP-Link, ASUS, Netgear, D-Link, Linksys, Tenda, and many others. This is almost certainly the gateway address of the router that assigned you 192.168.1.114.
• 192.168.1.254 — Used as the default gateway by some ISP-provided routers and modems, particularly those from BT, Sky, and certain Huawei and ZTE models. It is the last usable host address in the 192.168.1.x subnet.
• 192.168.0.1 — The second most common default gateway, used by Netgear, D-Link, and some TP-Link models. If your device is on a 192.168.0.x network instead, this would be your gateway.
• 192.168.2.1 — Used by some Cisco and older Belkin routers as their default gateway address.
• 10.0.0.1 — A private Class A address used by some Apple AirPort routers, Xfinity gateways, and other ISP-provided equipment as the default gateway.
• 192.168.100.1 — Commonly used by cable modems and ISP gateways, particularly those from Comcast/Xfinity and some Huawei devices.
• 192.168.8.1 — The default gateway for Huawei 4G/5G mobile Wi-Fi routers and some HiLink devices.
• 192.168.10.1 — Used by some Cisco, Ubiquiti, and older Apple AirPort Extreme models as their default gateway.

Frequently Asked Questions About 192.168.1.114

Why has my device been assigned 192.168.1.114?

Your router's DHCP server automatically assigned 192.168.1.114 to your device when it connected to the network. This is normal behavior on any router operating in the 192.168.1.x subnet — brands like TP-Link, ASUS, Netgear, D-Link, and Linksys all use this range. The specific address 192.168.1.114 was simply the next available address in the DHCP pool at the time your device connected.

Can I use 192.168.1.114 to log into my router?

Only if your router has been specifically configured to use 192.168.1.114 as its management IP address. By default, routers on the 192.168.1.x subnet use 192.168.1.1 or 192.168.1.254 as their admin login address — not 192.168.1.114. To access your router's admin panel, navigate to your Default Gateway address, which you can find by running ipconfig /all on Windows.

Is 192.168.1.114 a safe IP address?

Yes. 192.168.1.114 is a private IP address that is only accessible within your local network. It cannot be reached from the public internet, so it poses no inherent external security risk. However, you should still ensure your router's admin panel (typically at 192.168.1.1) is protected with a strong password, and that your Wi-Fi network uses WPA2 or WPA3 encryption.

How do I make 192.168.1.114 permanent for my device?

You can make 192.168.1.114 a permanent address for your device in two ways. The first is to configure a static IP directly on the device itself through its network settings, setting the IP to 192.168.1.114, the subnet mask to 255.255.255.0, and the gateway to your router's IP (typically 192.168.1.1). The second and often easier method is to use your router's DHCP reservation feature — log into your router admin panel, find the DHCP reservation or address binding section, and bind 192.168.1.114 to your device's MAC address.

What should I do if there is an IP conflict at 192.168.1.114?

An IP conflict at 192.168.1.114 occurs when two devices on the same network are assigned the same address. You will typically see a warning message on one or both devices. To resolve it, disconnect one of the conflicting devices, then either release and renew the IP lease (run ipconfig /release followed by ipconfig /renew on Windows) or restart both devices. To prevent future conflicts, use your router's DHCP reservation feature to ensure 192.168.1.114 is only ever assigned to one specific device.

Which router brands commonly assign 192.168.1.114 via DHCP?

Any router that uses the 192.168.1.x subnet and has a DHCP pool that includes .114 can assign this address. The most common brands include TP-Link (DHCP range typically 192.168.1.100–192.168.1.199), ASUS (range 192.168.1.2–192.168.1.254), Netgear (range 192.168.1.2–192.168.1.254 or 192.168.1.100+), D-Link, Linksys, and Tenda. All of these brands use 192.168.1.1 as their default gateway.