192.168.1.112 Admin Login

192.168.1.112 is a Class C private IPv4 address belonging to the 192.168.1.0/24 subnet — one of the most widely deployed private network ranges in home and small-office environments worldwide. Unlike fixed default gateway addresses such as 192.168.1.1 or 192.168.0.1, the address 192.168.1.112 is not hardcoded as a factory default gateway for any single router manufacturer. Instead, it operates as a general-purpose private IP address — most commonly assigned automatically by a router's DHCP server to a connected client device, or manually configured as a static address for a specific piece of network equipment. You will frequently encounter 192.168.1.112 on networks where the gateway router is set to 192.168.1.1 or 192.168.1.254, as it falls squarely within the typical DHCP pool range of 192.168.1.100–192.168.1.150 used by routers from brands like TP-Link, Netgear, Linksys, ASUS, and D-Link. If your device is currently showing 192.168.1.112 as its IP address, your network is functioning normally — your router's admin panel remains accessible at its own gateway address, not at 192.168.1.112 itself.

How to Access 192.168.1.112

To reach any device or admin interface hosted at 192.168.1.112, open your preferred web browser — Chrome, Firefox, Edge, or Safari — and type http://192.168.1.112 directly into the address bar, then press Enter. If a device on your network — such as an IP camera, NAS unit, managed switch, or network printer — has been assigned this address, its configuration page will load immediately. You must be connected to the same local network as the device, either via Wi-Fi or a wired Ethernet cable, for this to work.

Because 192.168.1.112 is a private address defined under RFC 1918, it is completely inaccessible from the public internet, which provides an inherent layer of security to any device using it. If you are trying to reach a router admin panel at 192.168.1.112, first confirm that your router has been manually reconfigured to use this address as its LAN IP. Most routers in the 192.168.1.x subnet default to 192.168.1.1 as their gateway. If 192.168.1.112 was set intentionally, log in using your router's admin credentials — typically found on the label on the bottom or back of the device. The most common default credentials are username: admin and password: admin, though this varies by brand and model.

Router Brands That Operate in the 192.168.1.x Subnet

While no major router manufacturer uses 192.168.1.112 specifically as a factory-set default gateway, many of the world's most popular router brands default to the 192.168.1.x address space, meaning your device can easily receive 192.168.1.112 as a DHCP-assigned address on any of these networks:

• TP-Link — Most TP-Link home routers (Archer series, TL-WR series, Deco mesh systems) use 192.168.1.1 as the default gateway, placing all connected devices in the 192.168.1.x range. TP-Link's DHCP pools typically start at 192.168.1.100, making 192.168.1.112 a very common lease address — it is often the 13th device to connect to the network.
• Netgear — Many Netgear Nighthawk, Orbi, and R-series routers default to 192.168.1.1, with DHCP ranges that include 192.168.1.112. Netgear's default DHCP pool commonly spans 192.168.1.2 through 192.168.1.254, so 192.168.1.112 is a regularly assigned address on Netgear networks.
• Linksys — Linksys routers (EA series, WRT series, Velop mesh) commonly use 192.168.1.1 as the gateway, assigning addresses like 192.168.1.112 to connected clients via DHCP. Linksys is one of the most historically significant brands associated with the 192.168.1.x subnet.
• ASUS — ASUS routers (RT-AX series, RT-AC series, ZenWiFi mesh) default to 192.168.1.1 and assign DHCP leases within the 192.168.1.x pool. On ASUS networks, 192.168.1.112 is a typical address for the 12th or 13th connected device depending on pool configuration.
• D-Link — Many D-Link routers (DIR series) operate within the 192.168.1.x subnet, and devices connected to them may receive 192.168.1.112 via DHCP. D-Link's default gateway is often 192.168.1.1, placing 192.168.1.112 well within the standard DHCP range.
• Buffalo — Buffalo AirStation routers operate in the 192.168.1.x subnet, and devices connected to them may receive 192.168.1.112 via DHCP when multiple clients are active on the network.

If you are connected to any of these routers and your device shows an IP of 192.168.1.112, your network is functioning normally. To access your router's admin panel, navigate to your router's default gateway address — not to 192.168.1.112 itself.

What Is 192.168.1.112 Used For?

Because 192.168.1.112 falls within the standard DHCP pool of most home and small-business routers using the 192.168.1.x subnet, it is one of the most commonly encountered addresses on local networks. Here are the most typical use cases you will find for this address:

• DHCP-Assigned Client Devices: On networks where the DHCP pool starts at 192.168.1.100 (as is common with TP-Link, Netgear, and Linksys routers), 192.168.1.112 is simply the 13th device to connect — a laptop, smartphone, tablet, smart TV, or gaming console that received this address automatically from the router's DHCP server.
• IP Cameras & Security Systems: Many IP cameras — including models from Hikvision, Dahua, Axis, and Reolink — are factory-configured with a static IP in the 192.168.1.x range. Network administrators frequently assign 192.168.1.112 as a static address to IP cameras to ensure they are always reachable at a predictable address. You can access the camera's live feed and settings by navigating to http://192.168.1.112 in your browser.
• NAS (Network Attached Storage) Devices: NAS units from brands like Synology, QNAP, and Western Digital My Cloud are often assigned static IPs such as 192.168.1.112 by network administrators to ensure the storage device is always reachable at a consistent address for file sharing and backups.
• Network Printers: Printers from HP, Canon, Epson, and Brother that are connected to a 192.168.1.x network frequently receive addresses in the .100–.150 range via DHCP, with 192.168.1.112 being a common assignment. You can access the printer's embedded web server at this address to manage print queues, ink levels, and settings.
• Smart Home Hubs & IoT Devices: Smart home controllers, Zigbee/Z-Wave hubs, and other IoT devices are often pinned to static IPs like 192.168.1.112 to ensure automation rules and integrations remain stable and do not break when the device reconnects to the network.
• Managed Switches & Access Points: Network administrators frequently assign static IPs like 192.168.1.112 to managed switches, wireless access points, and other infrastructure devices to make them easy to locate and configure remotely within the LAN.

If You Can't Access 192.168.1.112

If typing http://192.168.1.112 into your browser results in a timeout, a "page not found" error, or a blank screen, there are several likely causes to investigate:

• Wrong network: Your computer or phone may be connected to a different network than the device at 192.168.1.112. Verify that both devices share the same 192.168.1.x subnet by checking your device's IP settings.
• Device is offline: The device assigned to 192.168.1.112 may be powered off, rebooting, or physically disconnected from the network. Check its status lights and cable connections.
• IP address has changed: If the address was assigned via DHCP, the lease may have expired and the device may now hold a different IP. Log in to your router's admin panel (typically at 192.168.1.1) and check the DHCP client list to find the device's current address.
• Incorrect IP configuration on your PC: If your computer's IP is manually set to a different subnet (e.g., 192.168.0.x), it will not be able to reach 192.168.1.112. Set your network adapter to obtain an IP address automatically, or manually assign it an address in the 192.168.1.x range.
• Firewall blocking access: A software firewall on your computer or a network-level firewall rule may be blocking the connection. Temporarily disable your firewall to test connectivity.
• Browser cache issue: Clear your browser cache or try accessing 192.168.1.112 in a private/incognito window to rule out cached errors.

If none of the above resolves the issue, open the Command Prompt on Windows (Start > type cmd > press Enter) and run ping 192.168.1.112 to check whether the device is reachable at the network level. A successful ping confirms the device is online; a failed ping points to a connectivity or addressing problem. To confirm your exact gateway address, also run ipconfig and look for the Default Gateway field — that is the address you should use to access your router's admin panel.

How to Assign 192.168.1.112 as a Static IP Address

If you want a specific device on your network to always use 192.168.1.112 — rather than receiving a random address from the DHCP pool — you have two options: configure a DHCP reservation on your router, or set a static IP directly on the device itself.

Method 1: DHCP Reservation on Your Router (Recommended)

This is the recommended approach because it keeps all IP management centralized on the router. Log in to your router's admin panel (usually at 192.168.1.1 or 192.168.1.254), navigate to the DHCP Settings or Address Reservation section, and bind the device's MAC address to the IP 192.168.1.112. From that point on, every time that device connects to the network, it will always receive 192.168.1.112 from the router — no manual configuration needed on the device itself.

Method 2: Static IP Directly on the Device (Windows)

1. Open Settings > Network & Internet > Change adapter options.
2. Right-click your active network adapter and select Properties.
3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
4. Choose Use the following IP address and enter:
   • IP address: 192.168.1.112
   • Subnet mask: 255.255.255.0
   • Default gateway: 192.168.1.1 (or your router's IP)
   • Preferred DNS: 192.168.1.1 or a public DNS like 8.8.8.8
5. Click OK to save.

Important: Before assigning 192.168.1.112 as a static address, make sure it is either outside your router's DHCP pool range or explicitly excluded from it, to prevent IP address conflicts. If your DHCP pool runs from 192.168.1.100 to 192.168.1.150, either exclude 192.168.1.112 from the pool in your router's settings, or use a static address outside that range (e.g., 192.168.1.50).

Avoiding IP Address Conflicts at 192.168.1.112

An IP address conflict occurs when two devices on the same network are assigned the same IP — in this case, 192.168.1.112. This causes both devices to lose network connectivity intermittently or completely, and can be difficult to diagnose. Conflicts at 192.168.1.112 are particularly common because this address falls within the default DHCP range of many TP-Link, Netgear, Linksys, ASUS, and D-Link routers, meaning the router could dynamically assign it to a new device even if another device already has it configured as a static IP.

To prevent conflicts at 192.168.1.112:

• Log in to your router admin panel at 192.168.1.1 and narrow or adjust the DHCP pool so that 192.168.1.112 is excluded from dynamic assignment.
• Use DHCP reservation (MAC address binding) instead of manually setting static IPs on devices — this ensures the router always assigns 192.168.1.112 to the correct device and never to another.
• If you receive a conflict warning on Windows, open the Command Prompt and run arp -a to see which MAC addresses are associated with 192.168.1.112 on your network, helping you identify the conflicting device.

Router Username and Password List

What Is a Private IP Address Like 192.168.1.112?

192.168.1.112 is a private IPv4 address defined under RFC 1918, the standard that reserves specific IP ranges exclusively for use within private local area networks (LANs). This means 192.168.1.112 is never routed over the public internet — it exists only within your home or office network and is invisible to the outside world.

The full private range for Class C addresses spans from 192.168.0.0 to 192.168.255.255, and the specific subnet your device belongs to — 192.168.1.0/24 — supports up to 254 usable host addresses, from 192.168.1.1 to 192.168.1.254. The /24 notation means the first 24 bits of the address (192.168.1) identify the network, while the last 8 bits (.112) identify the specific host device.

When your router's DHCP server assigns 192.168.1.112 to your device, it means:

• Your device can communicate with all other devices on the same subnet (e.g., 192.168.1.1 through 192.168.1.254).
• All outbound internet traffic from your device is routed through the gateway (typically 192.168.1.1) and then translated to your public IP via NAT (Network Address Translation).
• The address 192.168.1.112 is not visible to the outside internet — it is entirely local to your network.
• Because it is dynamically assigned by DHCP, it may change the next time your device reconnects unless you configure a static IP reservation.

Other commonly used private gateway addresses in related subnets include 192.168.0.1, 192.168.2.1, 10.0.0.1, 192.168.100.1, 192.168.1.254, 192.168.8.1, and 192.168.10.1.

Related IP Addresses in the 192.168.1.0/24 Subnet

The 192.168.1.0/24 subnet contains 254 usable host addresses. Below are some of the most commonly referenced IP addresses within this subnet that you may encounter on your network alongside 192.168.1.112:

• 192.168.1.1 — The most common default gateway address in the 192.168.1.x subnet, used by TP-Link, Netgear, Linksys, ASUS, D-Link, and many other router brands as their factory default admin login IP.
• 192.168.1.254 — An alternative default gateway used by some router brands (notably certain BT and Sky routers in the UK, as well as some Cisco and Technicolor models) as their admin panel address.
• 192.168.1.100–192.168.1.150 — The typical DHCP pool range assigned by most routers using the 192.168.1.x subnet. Your device's address of 192.168.1.112 falls squarely within this range, confirming it was dynamically assigned by your router's DHCP server.
• 192.168.1.2–192.168.1.99 — Addresses in this range are commonly reserved for static assignment to infrastructure devices such as managed switches, access points, NAS drives, and printers on well-organized home and office networks.
• 192.168.1.255 — The broadcast address for the 192.168.1.0/24 subnet. This address is used to send data to all devices on the subnet simultaneously and cannot be assigned to any individual device.

Frequently Asked Questions About 192.168.1.112

Is 192.168.1.112 a router's default gateway address?

No — 192.168.1.112 is not a factory-set default gateway for any major router manufacturer. It is a general-purpose private IP address within the 192.168.1.0/24 subnet. It is most commonly assigned by a router's DHCP server to a connected client device (such as a laptop, smartphone, or smart TV) on networks where the gateway router is set to 192.168.1.1. Routers from TP-Link, Netgear, Linksys, ASUS, and D-Link all operate in the 192.168.1.x subnet and can assign 192.168.1.112 to connected devices.

How do I find my router's admin panel if my device IP is 192.168.1.112?

If your device has been assigned 192.168.1.112, your router's admin panel is most likely at 192.168.1.1 or 192.168.1.254 — not at 192.168.1.112 itself. To confirm your exact gateway address, open the Command Prompt on Windows (Start > type cmd > press Enter), type ipconfig, and look for the Default Gateway field. On a Mac, go to System Preferences > Network, select your active connection, and click Advanced > TCP/IP to find the router address.

Can I use 192.168.1.112 as a static IP for my printer or IP camera?

Yes — 192.168.1.112 is a perfectly valid static IP address for a printer, IP camera, NAS device, or any other networked equipment on a 192.168.1.x network. To do this safely, either configure a DHCP reservation in your router's admin panel (binding the device's MAC address to 192.168.1.112), or set the static IP directly on the device. Make sure to exclude 192.168.1.112 from your router's DHCP pool to prevent IP address conflicts with other devices on your TP-Link, Netgear, Linksys, ASUS, or D-Link network.

Why does my device keep getting 192.168.1.112 assigned to it?

Your router's DHCP server is assigning 192.168.1.112 to your device because it falls within the configured DHCP pool range — typically 192.168.1.100 to 192.168.1.150 on most home routers. This is completely normal behavior. The specific address your device receives depends on the order in which devices connect and the availability of addresses in the pool. If you want your device to always receive 192.168.1.112, set up a DHCP reservation in your router's admin panel at 192.168.1.1.

Is 192.168.1.112 safe to use on my network?

Yes — 192.168.1.112 is a private IP address that is completely inaccessible from the public internet. It is defined under RFC 1918 and is only visible within your local network. No external party can directly connect to a device at 192.168.1.112 without first gaining access to your local network. However, you should always ensure your router's admin panel (at 192.168.1.1 or 192.168.1.254) is protected with a strong, unique password to prevent unauthorized access to your network settings.