10.10.1.1 Admin Login

10.10.1.1 is a private Class A IP address used as a default gateway in select router and modem hardware. The most documented device confirmed to use 10.10.1.1 as its factory default gateway is the ADB P-964CM, a DSL modem router manufactured by ADB (Advanced Digital Broadcast). Beyond this specific model, 10.10.1.1 is also widely adopted as a manually configured gateway in enterprise, ISP, and business network environments where administrators prefer the broader 10.0.0.0/8 Class A address space over the more common 192.168.1.1 or 192.168.0.1 ranges. Because it belongs to the Class A private range defined by RFC 1918 (10.0.0.0 – 10.255.255.255), 10.10.1.1 is never routable on the public internet and is exclusively accessible from within your local network. Other well-known Class A private gateways include 10.0.0.1, which is frequently used by cable modems and ISP-supplied equipment.

How to Access 10.10.1.1

To reach your router's admin panel via 10.10.1.1, open any web browser — Chrome, Firefox, Edge, or Safari — and type http://10.10.1.1 directly into the address bar. Do not type it into a search engine, as that will return search results rather than your router's login page. Press Enter and you should be presented with a login prompt asking for your username and password.

For the ADB P-964CM and similar ADB modem routers using 10.10.1.1, the default credentials are typically printed on a label on the bottom or rear of the device. Common factory defaults for devices on this IP include:

• Username: admin | Password: admin
• Username: admin | Password: password
• Username: admin | Password: (blank — just press Enter)

Once logged in, you can manage your wireless network name (SSID), Wi-Fi password, DHCP settings, port forwarding rules, DNS configuration, firewall options, and firmware updates — all from within the 10.10.1.1 admin interface. Make sure your device is connected to the router either via Wi-Fi or an Ethernet cable before attempting to access 10.10.1.1, as this address is only reachable from within the local network.

If You Can't Access 10.10.1.1

If typing http://10.10.1.1 into your browser doesn't load a login page, there are several possible reasons and fixes to try:

• Wrong gateway address: 10.10.1.1 may not be your router's actual default gateway. Open the Command Prompt on Windows (Start > type cmd > press Enter) and run ipconfig /all. Look for the Default Gateway field under your active network adapter. On macOS or Linux, run netstat -nr or ip route in the Terminal. If the gateway shown is different from 10.10.1.1, use that address instead. You can also check our guide to find your router IP address.
• Not connected to the network: Ensure your computer or device is actively connected to the router — either via Ethernet cable or Wi-Fi. A disconnected device cannot reach 10.10.1.1.
• Browser cache or extensions: Clear your browser's cache and disable any VPN or proxy extensions that may be intercepting the request. Try opening 10.10.1.1 in a private/incognito window.
• Management port changed: Some routers change the default HTTP port. If port 80 has been altered, try http://10.10.1.1:8080 or https://10.10.1.1 in your browser.
• IP address was changed: A previous administrator may have changed the router's LAN IP from 10.10.1.1 to something else. In this case, you may need to perform a factory reset to restore the default gateway of 10.10.1.1.

How to Reset Your Router to Restore 10.10.1.1

If you've lost access to your router's admin panel at 10.10.1.1 — whether due to a forgotten password or a changed LAN IP — a factory reset will restore all settings to their defaults, including the 10.10.1.1 gateway address and the original login credentials.

To perform a factory reset on most routers and modems that use 10.10.1.1 (including the ADB P-964CM):

1. Make sure the router is powered on. Do not unplug it during the reset process.
2. Locate the Reset button on the back or bottom of the device. It is usually a small recessed pinhole button labeled "Reset" or "RST".
3. Use a straightened paperclip, toothpick, or SIM ejector tool to press and hold the Reset button for 10 to 30 seconds, depending on the model. The indicator lights on the router will typically flash or change color to signal the reset is in progress.
4. Release the button and wait for the router to fully reboot — this usually takes 60 to 90 seconds.
5. Once the router has restarted, reconnect your device to the network and navigate to http://10.10.1.1 in your browser using the factory default credentials found on the device label.

Important: A factory reset will erase all custom configurations, including your Wi-Fi name, Wi-Fi password, port forwarding rules, and any other changes you've made. Be sure to note down your current settings before resetting if you wish to restore them afterward.

Changing Your Router Password at 10.10.1.1

Keeping the default admin password on any router is a significant security risk. If your router's gateway is 10.10.1.1, you should change the admin password as soon as possible after your initial setup. Here's how to do it:

1. Log in to your router's admin panel by navigating to http://10.10.1.1 and entering your current credentials.
2. Once inside the dashboard, look for a section labeled Administration, System, Management, or Advanced Settings — the exact label depends on your router's firmware.
3. Find the Change Password or Admin Password option and enter your new password. You will typically be asked to confirm it by typing it a second time.
4. Click Save or Apply to confirm the change. You will be logged out and prompted to log back in with your new password.

Choose a strong password that is at least 12 characters long and includes a mix of uppercase letters, lowercase letters, numbers, and symbols. Avoid using easily guessable information such as your name, address, or the word "admin". A strong admin password at 10.10.1.1 is your first line of defense against unauthorized access to your network.

Router Username and Password List

What Is 10.10.1.1? Understanding This Class A Private IP

10.10.1.1 is a private IPv4 address belonging to the Class A address block, which spans from 10.0.0.0 to 10.255.255.255. This entire range is reserved for private use under RFC 1918, meaning it can never appear on the public internet and is exclusively used within local area networks (LANs). The Class A private range is the largest of the three RFC 1918 blocks, capable of supporting over 16 million unique host addresses — making it the preferred choice for large enterprise networks, data centers, ISPs, and corporate environments that need to accommodate thousands of devices.

When 10.10.1.1 is assigned as a router's default gateway, it serves as the central communication hub for all devices on the local network. Every device that connects to your router — whether a laptop, smartphone, smart TV, printer, or gaming console — receives its own private IP address from the router's DHCP server. In a typical 10.10.1.0/24 subnet, those addresses would be assigned in a range such as:

• First connected device: 10.10.1.2
• Second connected device: 10.10.1.3
• Third connected device: 10.10.1.4
• ...and so on up to 10.10.1.254

The router at 10.10.1.1 acts as the traffic director — receiving data requests from your devices, forwarding them to the internet via your ISP, and routing the responses back to the correct device on your network. Without this gateway, your devices would have no path to communicate with the outside world.

The 10.10.x.x address space is particularly popular in business and enterprise environments because it avoids conflicts with the more commonly used home network ranges like 192.168.1.x or 192.168.0.x. Network administrators often choose 10.10.1.1 specifically to segment internal networks cleanly, especially in multi-site organizations where different subnets (10.10.1.0/24, 10.10.2.0/24, 10.10.3.0/24, etc.) are assigned to different departments, floors, or branch offices.

10.10.1.1 and the ADB P-964CM

The most well-documented consumer device confirmed to ship with 10.10.1.1 as its factory default gateway is the ADB P-964CM, a DSL modem router produced by ADB (Advanced Digital Broadcast), a European telecommunications equipment manufacturer. ADB devices are commonly deployed by ISPs across Europe and other regions as customer-premises equipment (CPE).

If you are using an ADB P-964CM or a similar ADB modem router and need to access its admin panel:

• Open your browser and go to http://10.10.1.1
• Enter the default credentials found on the label on the bottom of your device (username and password fields may be blank by default on some ADB models — simply leave them empty and click Login)
• Once inside, you can configure your DSL connection settings, wireless network, DHCP range, DNS servers, and security options

Beyond the ADB P-964CM, 10.10.1.1 is also used as a manually assigned gateway in a wide variety of network setups — particularly in corporate environments, VPN configurations, and ISP-managed networks where the 10.10.x.x subnet is deliberately chosen to avoid overlap with standard home network ranges.

Related IP Addresses in the 10.10.1.x Subnet

The IP address 10.10.1.1 sits within the 10.10.1.0/24 subnet, which provides 254 usable host addresses (10.10.1.1 through 10.10.1.254). This subnet is part of the broader 10.10.0.0/16 block, which itself falls under the massive 10.0.0.0/8 Class A private range. Understanding the neighboring addresses in this subnet can help you troubleshoot connectivity issues and manage your network more effectively.

Here are some commonly referenced IP addresses related to the 10.10.1.1 gateway and its subnet:

• 10.10.1.1 — The default gateway / router admin address (current page)
• 10.10.1.2 — Typically the first DHCP-assigned client address in the subnet
• 10.10.1.100 — A common starting point for DHCP pools in enterprise configurations
• 10.10.1.254 — Sometimes used as an alternate gateway address on the same subnet
• 10.10.1.255 — The broadcast address for the 10.10.1.0/24 subnet (not assignable to hosts)

If you are looking for other commonly used private gateway addresses outside the 10.10.1.x range, you may find these links helpful:

• 10.0.0.1 — A widely used Class A gateway for cable modems and ISP equipment
• 192.168.1.254 — Common default for certain DSL routers and ISP gateways
• 192.168.0.1 — One of the most popular home router default gateways
• 192.168.8.1 — Default gateway for Huawei routers and mobile hotspots
• 192.168.10.1 — Used by certain Cisco and Ubiquiti devices
• 192.168.100.1 — Common for cable modems and some ISP-provided routers

Frequently Asked Questions About 10.10.1.1

What router uses 10.10.1.1 as its default IP?

The ADB P-964CM DSL modem router is the most documented consumer device confirmed to use 10.10.1.1 as its factory default gateway. Beyond this specific model, 10.10.1.1 is frequently used as a manually configured gateway in enterprise, ISP, and business networks that prefer the Class A 10.x.x.x address space.

Is 10.10.1.1 a public or private IP address?

10.10.1.1 is a private IP address. It belongs to the Class A private range (10.0.0.0 – 10.255.255.255) defined by RFC 1918. This means it is never routable on the public internet and can only be accessed from within your local network. You cannot reach 10.10.1.1 from outside your home or office network.

What is the default username and password for 10.10.1.1?

The most common default credentials for routers and modems using 10.10.1.1 are admin / admin or admin / password. For ADB devices, the credentials may be blank — try leaving both fields empty and clicking Login. Always check the label on the bottom or rear of your device for the exact factory defaults specific to your model.

Why can't I access 10.10.1.1 in my browser?

If 10.10.1.1 isn't loading, first confirm it is actually your router's gateway by running ipconfig /all (Windows) or netstat -nr (Mac/Linux) and checking the Default Gateway field. Also ensure you are connected to the router's network, that you are typing the address into the browser's address bar (not a search engine), and that no VPN or proxy is active on your device.

What is the subnet for 10.10.1.1?

When used as a standard home or small office gateway, 10.10.1.1 typically operates within the 10.10.1.0/24 subnet with a subnet mask of 255.255.255.0. This provides 254 usable host addresses (10.10.1.1 through 10.10.1.254). In larger enterprise deployments, it may be part of a wider /16 or /8 subnet.

How do I change the Wi-Fi password using 10.10.1.1?

Log in to your router's admin panel at http://10.10.1.1 using your admin credentials. Navigate to the Wireless or Wi-Fi Settings section of the dashboard. Look for the WPA Key, Wi-Fi Password, or Passphrase field and enter your new password. Save the changes — your connected devices will need to reconnect using the new password.

What is the difference between 10.10.1.1 and 192.168.1.1?

Both are private gateway IP addresses, but they belong to different RFC 1918 blocks. 10.10.1.1 is a Class A address (10.0.0.0/8), while 192.168.1.1 is a Class C address (192.168.0.0/16). The Class A range supports far more host addresses and is preferred in enterprise and ISP environments, while 192.168.1.1 is the most common default gateway for consumer home routers.